Extron ShareLink Pro 2000 Manual de Usario

Extron No categorizado ShareLink Pro 2000

Lee a continuación 📖 el manual en español para Extron ShareLink Pro 2000 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
1
ShareLink Pro 2000 • Setup Guide
This guide provides instructions for installing and connecting the Extron ShareLink Pro 2000 Collaboration Gateway. The
ShareLink Pro 2000 allows anyone to present wireless or wired content from a personal device—such as a PC, laptop, smartphone,
or tablet—onto a display. It is compatible with computers with Windows
® and macOS®, as well as AndroidTM and Apple® iOS
smartphones and tablets.
IMPORTANT NOTE:
Go to www.extron.com for the complete user guide, installation instructions, and specications
before connecting the product to the power source.
Installation
Mounting
The ShareLink Pro 2000 can be placed on a desktop or tabletop using the included rubber feet, or mounted to a rack or furniture
(see the , available at ShareLink Pro 2000 User Guide www.extron.com, for mounting options and instructions).
NOTE: Do not block or restrict air ventilation holes on the top and sides of the ShareLink Pro 2000.
Rear Panel Features and Cabling
RESET
PoE+
POWER
12V
3.0 A MAX
HDM /CEC
HDMI
L R
LINE IN
L R
LINE OUT
AUDIO
INPUT OUTPUT
LAN
AA BB CC
FF GG
DD EE
Figure 1. ShareLink Pro 2000 Rear Panel
A — Connect a power supply to this 2-pole captive screw connector.Power input
B — Connect an HDMI source device to this input.HDMI input
C — Connect an HDMI display device to this female HDMI connector.HDMI output
D — Connect a balanced or unbalanced stereo (or dual mono) line level audio source to this 5-pole 3.5 mm captive Audio input
screw connector. Wire the connector as shown in figure 2:
Tip
Sleeve(s)
Ring
Ring
Tip
Tip
Sleeve
Sleeve
Tip
Unbalanced Audio Input
Left
Right
Left
Right
Balanced Audio Input
Do not tin the wires!
Figure 2. Audio Input Captive Screw Connector Wiring
E — Connect a balanced or unbalanced stereo (or dual mono) line level audio device to this 5-pole 3.5 mm captive Audio output
screw connector. Wire the connector as shown in figure 3:
ATTENTION:
• For unbalanced audio, connect the sleeves to the ground contact. DO NOT connect the sleeves to the
negative (–) contacts.
• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne PAS connecter les manchons
aux contacts négatifs (–).
Balanced Audio Output Unbalanced Audio Output
Do not tin the wires!
Left
Tip
Sleeve(s)
NO Ground Here
NO Ground Here
Tip Right
Tip
Sleeve(s)
Ring
Ring
Tip
Left
Right
Figure 3. Audio Output Captive Screw Connector Wiring
2
ShareLink Pro 2000 • Setup Guide (Continued)
F — Use this button to reset the device (see the for details).Reset button and LED ShareLink Pro 2000 User Guide
G — Use an Ethernet cable to connect a network switch, hub, router, or PC to this female RJ-45 port. This port can LAN port
also be used for Power over Ethernet (PoE+).
Default IP settings:
IP address DHCP Gateway IP address: 192.168.254.254 : Off : 0.0.0.0
Subnet mask DNS address Link speed and duplex level: 255.255.255.0 : 0.0.0.0 : autodetected
Front Panel Features and Cabling
Sha Link Pro 2000re
HDMI INPUT OUTPUT
HD WIN HD SSPA
DECODER
STANDBY
SCREEN
WINDOW
USB
SIGNAL
HDCP
HDMI DECODER
INPUT
PASS-THROUGH
e
CONFIG
AA BB DD EE
CC FF
SS 5G
900mA
Figure 4. ShareLink Pro 2000 Front Panel
A — Lights green when the unit is powered on.Power LED indicator
B (future use)Config USB port
C — Use these buttons to select between HDMI window mode and pass-through mode. HDMI input selection buttons
These modes determine how the HDMI input is presented on the output (see below for details).
• button – Activates HDMI window mode, which displays the HDMI input source in addition to
or alongside any content currently being shared by client devices.
NOTE: Maximum output resolution for this mode is 1080p @ 60Hz.
• button – Activates HDMI pass-through mode, which routes the HDMI input signal
directly to the HDMI output unaltered. In this mode, neither the status bar nor decoder input streams are
shown on the output.
NOTE: Maximum output resolution for this mode is 4K @ 60Hz.
D — Input LED indicators
• HDMI Signal LED – Lights green when an HDMI signal is detected.
• Decoder Signal LED – Lights green when one stream is detected. Flashes green when more than one
stream is detected at the same time.
• HDMI HDCP LED – Lights green when the source signal is encrypted. Turns off when input signal is not
encrypted or when HDCP authorization is disabled.
• Decoder HDCP LED – Lights green when the decoder source signal is encrypted. Turns off when decoder
source signal is not encrypted or when HDCP authorization is disabled.
E — Output LED indicators
• HD Win – Lights green when HDMI source is active on the output in HDMI window mode. Lights amber if
HDMI pass-through mode is activated after originally being in window mode.
• Decoder – Lights green when at least one stream is active on the output. Lights amber if HDMI
pass-through mode is activated after at least one stream was active on the output.
• Standby Screen – Lights green when the standby screen (see on the next page) is active on the figure 5
output. Lights amber if HDMI pass-through mode is activated while the ShareLink Pro output displays the
standby screen.
NOTE: The standby screen images are displayed only when HDMI and decoder sources are active.not
• HD Pass – Lights green when the HDMI source is active on the output in pass-through mode.
F — Connect the Extron WFA 100 Wi-Fi Miracast adapter to this port. This adapter enables anyone to share content USB port
from a device running Windows 10 without installing any software (see the ). This port can also ShareLink Pro 2000 User Guide
be used for USB peripherals when using ConferenceShare (see the at ConferenceShare User Guide www.extron.com).
3
Once the ShareLink Pro 2000 is connected and powered on, the standby screen appears on the display:
1
1
1
1
12
2
2
2
23
3
3
3
3
Figure 5. ShareLink Pro 2000 Standby Screen
1 Hostname — Use this hostname to identify and access the ShareLink Pro 2000 during connection.
2 — Use this IP address to identify and access the ShareLink Pro 2000 during connection and to download the LAN
ShareLink Pro client software.
3 Login code — Use this code to connect to the ShareLink Pro 2000 using the software. This code can be customized or
disabled (see the for instructions).ShareLink Pro 2000 User Guide
Operation Using a Computer
Connecting a Computer to the ShareLink Pro 2000
A computer can be connected to the ShareLink Pro 2000 wirelessly through an external wireless access point (WAP), or wired
through a network device. See the instructions below for your preferred connection method.
Connecting through an External WAP
1. Ensure that the external WAP and the ShareLink Pro 2000 are wired to the same network.
2. Ensure that the ShareLink Pro 2000 is powered on and that wireless network capability is enabled
on your computer.
3. Open the wireless networks on your computer as shown at right, and connect to the external WAP.
Connecting through a Network Hub, Switch, or Router
1. Ensure that your computer is connected to the network through a hub, switch, or router.
2. Connect the LAN port of the ShareLink Pro 2000 to the network device using an RJ-45 cable.
Downloading the ShareLink Pro Software
To download the ShareLink Pro 2000 Software for Windows or macOS:
1. Connect your computer to the ShareLink Pro 2000 device, either through an
external WAP or through a physical network connection. The computer and the
ShareLink Pro 2000 must be on the same network.
2. Open a web browser and enter the ShareLink Pro IP address (see figure 5,
2)
in the browser. The ShareLink landing page appears (see image at right).
3. Click the icon (see
1 at right), and submit any required
information to run the executable (.exe) le for Windows or the .app le for
macOS.
1
1
1
1
1

Especificaciones del producto

Marca: Extron
Categoría: No categorizado
Modelo: ShareLink Pro 2000

¿Necesitas ayuda?

Si necesitas ayuda con Extron ShareLink Pro 2000 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Extron Manuales

Extron

Extron PI 115 Manual de Usario

27 Octubre 2024
Extron

Extron XTP DTP 24 Manual de Usario

27 Octubre 2024
Extron

Extron IN1608 XI Manual de Usario

25 Octubre 2024
Extron

Extron FOX II RS 104 Manual de Usario

25 Octubre 2024
Extron

Extron DTP T UWP 4K 232 D Manual de Usario

1 Octubre 2024
Extron

Extron FOX Matrix 7200 Manual de Usario

24 Septiembre 2024
Extron

Extron EWB 210 Series Manual de Usario

24 Septiembre 2024
Extron

Extron EDID 101D Manual de Usario

24 Septiembre 2024
Extron

Extron FMR 206 Manual de Usario

24 Septiembre 2024
Extron

Extron EWB Series Manual de Usario

24 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024