Fenix PD32 Manual de Usario

Fenix Flash PD32

Lee a continuación 📖 el manual en español para Fenix PD32 (4 páginas) en la categoría Flash. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Fenix PD32 Flashlight
Fenix PD32 is an outdoor flashlight in small size for versatile usage. It offers four levels of
brightness and two types of flashing mode to be adjusted by pressing the side switch in the head, it
perfectly meet the needs of different brightness and runtime in various conditions. PD32 is a
portable flashlight with light weight, with two frost-resistant CR123A Lithium batteries or one
high capacity 18650 Li-ion battery, the light performs wonderfully in freezing areas. Featuring the
advanced technology to keep constant brightness and waterproofing to IPX-8 Standard, PD32 is
the best solution for your outdoor illumination or emergency use.
Technical Parameters
General Mode
ANSI/FSC
Turbo
Low
Mid
High
Strobe
SOS
OUTPUT
315
LUMENS
9
LUMENS
70
LUMENS
130
LUMENS
315
LUMENS
130
LUMENS
RUNTIME
2h
200h
16h
8h
DISTANCE
141m
INTENSITY
5000cd
IMPACT
RESISTANT
1m
WATERPRO
OF
IPX-8 2m underwater
EXTRA
FUNCTION
ACCESSORI
H - ostler ,clip, lanyard, spare o ring and rubber switch boot
ES
Cree XP-G (R5) LED with a lifespan of 50,000 hours
Uses two 3V CR123A batteries (Lithium) or one 18650 rechargeable (Li battery -ion)
127 25.4mm (Length) x mm (Diameter)
61-gram weight (excluding batteries and the battery tube)
Digitally regulated output - maintains constant brightness
Reverse polarity protection, to protect from improper battery installation
Over heat protection to avoid high-temperature of the surface
Anti- - roll, slip resistant body design
Tactical tail switch with momentary- on function
Side switch in the head
Made of durable aircraft- grade aluminum
Premium Type III hard- - anodized anti abrasive finish
Toughened ultra- - clear glass lens with anti reflective coating
Notice: The above-mentioned parameters (tested by high-quality CR123A Lithium battery in Lab)
are approximate and may vary between flashlights, batteries and environments.
*The flashlight will transfer into the High brightness level after working about 30
minutes in the Turbo. Therefore, the runtime of Turbo output is an accumulated time.
Operation Instruction
Light turning on/off:
Press the tail switch lightly to activate the flashlight momentarily. And press the switch
completely to turn on the flashlight and lock it. Another complete press on it can turn it off.
On/Off Operation:
Depress the tail switch gently to momentarily activate the light. Depress the tail switch completely
to turn on the light and lock it. Another complete press on it can turn it off.
Mode Selecting:
A single press on the side switch in the head to adjust the brightness levels from Turbo Low
output Medium High circle. → →
Depress the side switch and hold it for 1 second to enter into Strobe mode.
Depress the side switch and hold it for 3 seconds to enter into SOS mode.
When the flashlight is in Strobe mode or SOS mode, a single press on the side switch to return to
general lighting mode.
The flashlight memorizes the last output in general lighting mode. However, it does not memorize
the mode, so the flashlight works in general lighting mode when it is lighted every time.
Over-heat protection: PD32 will accumulate a lot of heat when it is working in Turbo output. To
avoid the influence of using experience due to the high temperature, the flashlight will
automatically transfer into the high brightness level by working in Turbo output for over 30
minutes. If the Turbo output is needed continually, just reset it again.
Notice: The video for PD32 operation can be watched and downloaded from Fenix official
website, please log onto the service channel ->light operation video.
Battery Specifications
Dimensions
Nominal
voltage
Usability
CR123A
3V
Recommended
16340
3.7V
Banned
×
×
×
××
18650
3.7V
Cautious
16340
3.2V
Usable
18650
3.2V
Banned
×
×
×
××
Caution: please do not mix batteries of different size or type, or it will ruin the
batteries or flashlight.
Battery Replacement
Unscrew the tail cap to insert the batteries with the anode side (+) toward the light's head, screw
the tail cap to test.
Usage and Maintenance
18650 Li-ion batteries are industrial batteries and not for domestic use. Using inferior batteries
or misusing batteries (short circuit or high temperature, etc) may cause combustion and explosion
which will damage people and their property. Therefore, when using such batteries, users will
agree to take the relevant responsibility voluntarily. Quality Li-ion batteries with protective circuit
can lower the risks to some degree.
Please don't disassemble the sealed head, doing so can cause damage to the flashlight and will
void the warranty.
Please use battery of high quality, and take out the battery if the flashlight will not be used for a
long time, or it may cause damage from electrolyte leakage or battery explosion.
The o- o-ring may be worn out after using for a long time. If it happens, please replace the ring
with a new one to keep the flashlight properly sealed against water.
Please clean the contacts of your light from time to time, especially if the light flickers or
doesn't light up. There may be several reasons for a flickering or not working light:
Reason A: The battery needs replacing.

Especificaciones del producto

Marca: Fenix
Categoría: Flash
Modelo: PD32

¿Necesitas ayuda?

Si necesitas ayuda con Fenix PD32 haz una pregunta a continuación y otros usuarios te responderán




Flash Fenix Manuales

Fenix

Fenix E35R Manual de Usario

16 Septiembre 2024
Fenix

Fenix BC25R Manual de Usario

14 Septiembre 2024
Fenix

Fenix HT32 Manual de Usario

12 Septiembre 2024
Fenix

Fenix TK75 Manual de Usario

10 Septiembre 2024
Fenix

Fenix TK32 Manual de Usario

10 Septiembre 2024
Fenix

Fenix HT30R Manual de Usario

10 Septiembre 2024
Fenix

Fenix E15 Manual de Usario

10 Septiembre 2024

Flash Manuales

Últimos Flash Manuales