Festo DADG-D-F8-25 Manual de Usario

Festo No categorizado DADG-D-F8-25

Lee a continuación 📖 el manual en español para Festo DADG-D-F8-25 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Translation of the original instructions
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Holding brake DACS-...-S
Cylinder with holding brake DFLC/DFLG-...-S
Operating
Instruction manual from the
original manufacturer
Proximity sensor Contrinex DW-AD-603-M4 Installation
Tab. 1 Applicable documents
2 Safety
2.1 Safety instructions
Only assemble the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Status monitoring of holding brakes DACS, DFLC und DFLG.
2.3 Foreseeable misuse
The inductive proximity sensor DADG-D-F8 is exclusively provided for status mon-
itoring and is not suitable as a safety-relevant test system.
3 Further information
Accessories www.festo.com/catalogue.è
Spare parts www.festo.com/spareparts.è
4 Product overview
4.1 Product range overview
4.1.1 Scope of delivery
1Proximity sensor (1x)
Fig. 1
4.1.2 Not in scope of delivery
2Holding brake (1x)
DACS-...-S,
Cylinder with holding brake
DFLC/DFLG-...-S
Fig. 2
4.2 Function
Holding brake status Signal status
Closed On
Open Off
Tab. 2 Status monitoring
5 Assembly
Fig. 3 Remove threaded pin
1. Depressurise holding brake .2
2. Unscrew the threaded pin[A] from the outer surface.
Fig. 4 Screw in the proximity sensor
1. Screw the proximity sensor into the thread[C] up to the stop. Use the1
hexagon(D) on the sensor.
ÄThe lock nut[B] does not rest on the outer surface.
2. Connect the proximity sensor .1
ÄThe signal lights up.
Fig. 5 Adjust proximity sensor
Unscrew the proximity sensor slowly until the signal goes out.1
Fig. 6 Adjust proximity sensor
Screw the proximity sensor in slowly until the signal lights up.1
Fig. 7 Lock the proximity sensor
Tighten the lock nut[B]. Tightening torque:4Nm
6 Technical data
DADG-D-F8
Mounting type Flush
Ambient temperature [°C] –25 ... 70+
Switching frequency f [Hz] 5000
Degree of protection IP67
Housing material Steel, phosphated
Cable material TPE-U (PUR)
Voltage drop Ud [V] £ 2
Tab. 3 Technical data
8107310
DADG-D-F8
Proximity sensor
Instructions | Assembly
8107310
2019-06
[8107312]
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com

Especificaciones del producto

Marca: Festo
Categoría: No categorizado
Modelo: DADG-D-F8-25

¿Necesitas ayuda?

Si necesitas ayuda con Festo DADG-D-F8-25 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Festo Manuales

No categorizado Manuales

Últimos No categorizado Manuales