Festo EAHH-P2-25 Manual de Usario

Festo No categorizado EAHH-P2-25

Lee a continuación 📖 el manual en español para Festo EAHH-P2-25 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/sp.è
Document Product
User documents Electric cylinder EPCC
Electric cylinder unit EPCS
Tab. 1
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance is
±20%.
2.2 Intended use
Mounting of the electric cylinder EPCC or the electric cylinder unit EPCS in a flex
ible position.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional Information
Accessories www.festo.com/catalogue.è
4 Product Range Overview
4.1 Scope of delivery
1Flange mounting (1x)
2Slot nut (2x)
3Shim (6x)
4Screw (6x)
Fig. 1
Shims are only required with EAH...P245/60.3
4.2 Not in scope of delivery
5Electric cylinder EPCC (1x)
Fig. 2
5Electric cylinder unit EPCS (1x)
Fig. 3
6Screw (4x)
Fig. 4
5 Assembly
Fig. 5 Fixing slot nuts
1. Position slot nuts on the flange mounting .2 1
2. Fasten slot nuts with the screws .2 4
The shims must be used with EAH...P245/60.3
Fig. 6 Fastening flange mounting
Push flange mounting into the slots of the basic profile[A] with the slot1
nuts .2
Fig. 7 Mounting flange mounting
1. Position flange mounting on basic profile[A] as required.1
8135711
EAHH-P2
Flange mounting
8135711
202101a
[8135713]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 3470
www.festo.com
2. Tighten screws.4
EAHH-P2 25 32 45 60
M3x6 M3x6 M3x8 M5x104 Screw
[Nm] 1.4 1.4 1.8 6.4
Tab. 2
Fig. 8 Mounting electric cylinder
Mount electric cylinder with the flange mounting . Select screws5 1 6
suitable for the installation situation.

Especificaciones del producto

Marca: Festo
Categoría: No categorizado
Modelo: EAHH-P2-25

¿Necesitas ayuda?

Si necesitas ayuda con Festo EAHH-P2-25 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Festo Manuales

No categorizado Manuales

Últimos No categorizado Manuales