Festo VAVC-Q2-M22C-15-E Manual de Usario

Festo No categorizado VAVC-Q2-M22C-15-E

Lee a continuación 📖 el manual en español para Festo VAVC-Q2-M22C-15-E (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
VAVC-Q2-M22C
Seal cartridge
Festo SE & Co. KG
Ruiter Stre 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8198768
2023-09d
[8198770]
8198768
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Pinch valveVZQA-C-M22C
Operating instruction Pinch valveVZQH
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Before carrying out any work on the product: switch off the medium supply and
secure it against being switched back on.
2.2 Intended use
The seal cartridge controls the media flow.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories and spare parts èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
Fig.1
1
Seal cartridge(1x)
2
O-ring(2x)
3
Plunger(2x)
4.2 Not in scope of delivery
4
Fig.2
4
Pinch valve(1x)
VZQA-C-M22C, VZQH
5 Assembly
5.1 Preparation
WARNING
Risk of injury from media residues.
Wear personal protective equipment during assembly work.
1. Remove the pinch valve from the piping4
system è1 Applicable documents.
WARNING
Risk of injury from flying components.
When the cover is opened, the spring inside the valve is suddenly released.
Secure the cover with a suitable holding device when loosening.
2. For VZQA-C-M22C-25: lock the cover with a suitable holding device, e.g.a7
lever press.
3. Open the pinch valve on the cover with the plug screw.4 7
4. Remove the old seal cartridge in reverse order of assembly.
5.2 Assembly
1. Replace the old seal cartridge with an identical seal cartridge .1
Check: identical characteristics of seal cartridge and valve .4
Example: size 15
Seal cartridge VAVC-Q2-M22C-15-Eè
Valve VZQA-C-M22C-15-GG-V2V4E-64è
2. Select the grease that is suitable for the installation situation and the media.
3. Select the cleaning agent that is suitable for the installation situation and the
media.
4. Clean the pipe with a lint-free cleaning cloth.5
7
16
5
2
Fig. 3: Assembling seal cartridge
1. Grease the flange of the seal cartridge .6 1
2. Push the seal cartridge into the pipe .1 5
3. Mount the O-rings on both covers .2 7
3
8
Fig. 4: Assembly of plungers
1. Grease the plungers .3
2. Make sure the plungers are aligned.3
VAVC-Q2-M22C-6 VAVC-Q2-M22C-15 VAVC-Q2-M22C-25
3. Push the plungers into the ports .3 8
5
9
Fig. 5: Assembly of return piece
1. Grease the outside of the pipe .5
2. Grease the inside of the return piece .9
3. Slide the return piece onto the pipe .9 5
9
10
Fig. 6: Assembly of compression spring
1. Check the compression spring for external damage. If necessary, replaceaJ
the compression spring aJè3 Additional information.
2. Slide the compression spring onto the return piece .aJ 9
11
9
Fig. 7: Assembly of sleeve
For VAVC-Q2-M22C-15 only:
1. Check the sleeve for external damage. If necessary, replace the sleeveaA aA
è3 Additional information.
2. Make sure the sleeve is aligned.aA
3. Slide the sleeve onto the return piece .aA 9
9
12
Fig. 8: Assembly of housing
1. Clean the inside of the housing with a lint-free cleaning cloth.aB
2. Grease the inside of the housing .aB
3. Slide the housing to the stop.aB
7
Fig. 9: Mounting cover
1. Grease the male thread of the cover
7.
2. Tighten the cover .7
Cover7
7
7
77
VZQA-...-...V4 VZQA-...-...AL VZQH
VAVC-Q2-M22C-6 32 [Nm] 15±10 5±10 15±10ß% % %
VAVC-Q2-
M22C-15
ß50 [Nm] 40±10 40±10 –% %
VAVC-Q2-
M22C-25
ß85 [Nm] 40±10 40±10 –% %
3. Check that the valve is leak-proof.4
4. Install the valve in the piping system 4è1 Applicable documents.

Especificaciones del producto

Marca: Festo
Categoría: No categorizado
Modelo: VAVC-Q2-M22C-15-E

¿Necesitas ayuda?

Si necesitas ayuda con Festo VAVC-Q2-M22C-15-E haz una pregunta a continuación y otros usuarios te responderán




No categorizado Festo Manuales

No categorizado Manuales

Últimos No categorizado Manuales