Focal SHAPE 50 Manual de Usario

Focal Vocero SHAPE 50

Lee a continuación 📖 el manual en español para Focal SHAPE 50 (10 páginas) en la categoría Vocero. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
SHAPE®
Manuel d’utilisation / User Manual / Manual de uso /
使用手册 / 사용 설명 / 扱説明書
Français : page 2
English : page 11
Español : página 20
中文:第 页28
한국어 : 37 페이지
本人 : ペジ 46
11
SHAPE
®
Our policy of continual product improvement means that Focal-JMlab reserves the right to modify the technical specifications
of its products without notice. Product may vary from images.
Please validate your Focal-JMlab warranty; it is now possible to register your product
online: www.focal.com/warranty
U s e r M a n u a l English
A sample of this product was tested by an accredited independent laboratory in accordance with ISO/IEC
17025:2005. The laboratory declared it to be in compliance with European directives and other international
standards as follows: Electromagnetic compatibility ANSI C63.4, KN35/CISPR20/EN55035, KN32/CISPR32/
EN55032, IEC/EN61000-3-2, IEC/EN61000-3-3, Electrical safety IEC/EN/K/J60065. Product meets DIRECTIVES
EMC, RED, LVD, ErP, RoHS, REACH and WEEE and REGULATION (EC) No. 1275/2008.
Caution!
Risk of electrical shock
Do not open
Do not expose to water or moisture
Safety information
1. Read the instructions.
2. Keep this manual.
3. Respect the instructions.
4. Follow the instructions.
5. Do not expose this unit to rain or moisture.
6. Clean only with a dry cloth.
7. Do not obstruct the ventilation outlets (paper, fabric, curtains, etc.).
8. Allow a minimum distance of 5cm around the product for ventilation.
9. Do not install near any heat sources such as a radiator, oven or other appliance that produces heat (including
amplifiers).
10. Use only the power cord provided. If this does not match your electrical outlet, contact an electrician to have
it replaced.
11. Protect the power cord to avoid walking on it or pulling it, especially near the electrical outlet.
12. Only use accessories specified by the manufacturer or those supplied with the unit. Use with care.
13. Unplug this unit during storms or long periods out of use.
14. Refer all servicing to qualified personnel. Repair will be necessary, for example, in cases of damage to the power
cord or plug, spilled liquids or collision between another object and the unit, or if the unit is exposed to rain or
develops mould, or if it does not work correctly or, finally, if it is subject to a fall.
15. CAUTION: to reduce the risk of fire or electrical shock, this unit must not be exposed to rain or moisture. No
object containing water, such as a vase, may be placed on it.
16. CAUTION: this product is a Class 1 device. Connect the unit only using the supplied power cord incorporating
a connection to ground.
17. To disconnect it, unplug the power cord plug from the socket.
18. The power cord must remain easily accessible.
The lightning flash represented by the arrow symbol in an equilateral triangle is intended to alert users to
the presence of high voltage within the unit that could cause an electrical shock hazard.
The exclamation mark in an equilateral triangle is intended to alert users to the existence of important
instructions in the manual relating to the use and maintenance of the unit.
12
SHAPE
®
Thank you for purchasing a Focal product. We welcome you to our universe of high-fidelity sound. For over 30 years,
Focal has been designing, developing and manufacturing exceptional loudspeakers, and more recently, headphones.
Our values are innovation, tradition, performance and pleasure. They will help you enter a new universe of emotion, to
listen beyond sound. Wherever you are, our goal is to bring you together around a shared passion, rich, authentic sound.
SHAPE loudspeakers are a professional audio monitoring system. These products have been designed to combine
an impeccable sound image, high precision and wide frequency response in a compact format suitable for nearfield
listening.
Package Contents
In addition to this manual, your loudspeaker is supplied with the following:
• 1 power supply cord
4 adjustable spikes
1 protective grille for the tweeter (we advise it to be removed for listening as soon as possible)
1 protective grille for the woofer (we advise it to be removed for listening as soon as possible)
• 1 guarantee card
Check that none of these items is missing and remove all accessories from the packaging. To avoid damage to
your products during unpacking, please unpack in the following order: completely open the flaps on the cardboard
packaging. Fold them back over the sides. Remove the upper protective packing. Carefully lift the loudspeaker. Check
the packaging for any signs of damage. If you find any damage, inform the carrier and supplier. It is important to keep
the packaging in good condition for possible future use.
Recommendations
We would like to emphasise that high sound pressure can be generated by your products, particularly in 5.1 configuration.
As their distortion level is low and the level of user fatigue is minimal, it is not always easy to be aware of the real sound
pressure. Do not forget that exposure to high sound pressures for more than a certain time can lead to irreversible
hearing loss.
Guarantee
SHAPE loudspeakers are guaranteed for parts and labour for a period of two years within member countries of the
European Union from the date of delivery to the end customer. For countries outside the European Union, please refer
to the law in force in each country. During the guarantee period, Focal will repair or exchange a defective product,
provided that it is returned carriage paid to an approved Focal dealer. Damage caused by modifications to the product,
accidents, negligence or misuse are not covered by the guarantee. For more information, please contact your local
dealer or distributor. Register your product online at: www.focalprofessional.com/garantie.
Quick start guide
1. Before you start, make sure the loudspeakers and audio source (console, etc.) are in the off position and that all
controls on the rear of the loudspeakers are set to position 0.
2. Connect the audio signal from the source to the loudspeakers using the XLR and/or RCA inputs.
You can connect up to two sources to each loudspeaker using the two inputs available.
Both inputs (XLR and RCA) are active simultaneously. For more information, see page 14.
.3. Check the voltage shown on the 'Voltage Selection' switch located on the rear panel matches the voltage of your
area. If it does not match, do not connect the loudspeakers to mains power and contact your dealer or distributor. Use
the provided power cord to connect the loudspeaker to mains power.
4. Switch the audio source on and check the output sound level from the audio source connected to the loudspeaker
is set to - or to a very low level.
5. Switch the loudspeakers on. The loudspeakers are now in 'Standby' mode.
6. Increase the audio source level until the loudspeakers detect the signal, automatically putting the loudspeakers into
'On' mode.
After the loudspeakers have been switched on and after automatic activation of standby mode (see page
14 for more information on this function), the loudspeaker's audio signal detection circuit will change the
loudspeaker from 'Standby' to 'On' after a few seconds.
7. Once you have finished your recording, mixing or mastering session, we recommend that you switch your equipment
off in the following order:
a. Switch off the loudspeakers.
b. Switch audio sources off.
U s e r M a n u a l

Especificaciones del producto

Marca: Focal
Categoría: Vocero
Modelo: SHAPE 50

¿Necesitas ayuda?

Si necesitas ayuda con Focal SHAPE 50 haz una pregunta a continuación y otros usuarios te responderán




Vocero Focal Manuales

Vocero Manuales

Últimos Vocero Manuales