Focusrite Saffire PRO 14 Manual de Usario

Focusrite sistema de alta fidelidad Saffire PRO 14

Lee a continuación 📖 el manual en español para Focusrite Saffire PRO 14 (27 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/27

Safﬁre PRO Range

Dual Unit Support Guide

FA0444-02

Contents

Dual Unit Support ......................................................................................................... 2

Getting Started - Computer Connection ....................................................................... 2

Controlling Dual Units .................................................................................................. 2

Naming Units ................................................................................................................ 2

Master Sync Device ....................................................................................................... 3

DAW input and output stream order ............................................................................. 3

DAW routing .................................................................................................................. 4

Zero latency routing ..................................................................................................... 4

Dual Unit look-up tables ............................................................................................... 9

Dual Unit Support

It is now possible to run two Safﬁre interfaces connected to a single computer. This enables two devices to be connected to the

same system and used as one device expanding the available Inputs and Outputs to your DAW. Dual Device Support is limited to two

devices connected to the same bus at sample rates of 48kHz or below.

The following table shows which 2 Safﬁre units can and cannot be used together:

Liquid Safﬁre 56 Safﬁre PRO 40 Safﬁre PRO 24 DSP Safﬁre PRO 24 Safﬁre PRO 14

Liquid Safﬁre 56 NO NO YES YES YES

Safﬁre PRO 40 NO YES YES YES YES

Safﬁre PRO 26 YES YES YES YES YES

Safﬁre PRO 24 DSP YES YES YES YES YES

Safﬁre PRO 24 YES YES YES YES YES

Safﬁre PRO 14 YES YES YES YES YES

Dual unit combinations in can be used together, those in cannot be used together.Green Red

Therefore any two Safﬁre PROs can be used together, apart from the Liquid Safﬁre 56 which can only be used with Safﬁre PRO 24

DSP, Safﬁre PRO 24, or Safﬁre PRO 14

Getting Started - Computer Connection

Computer with a single FireWire port

Connect one Safﬁre to the FireWire port on the computer.

Connect the second Safﬁre to the spare FireWire port on the ﬁrst Safﬁre.

Note that the Safﬁre PRO 26, Safﬁre PRO 24, Safﬁre PRO 24 DSP and Safﬁre PRO 14 have a single FireWire port, so will need to be

connected to a Safﬁre PRO 40 or Liquid Safﬁre 56 and will require the external PSU when connected in this way.

Computer with multiple FireWire ports

Connect both Safﬁres directly to computer.

Note that both FireWire ports on the computer be on the same FireWire bus. i.e. the same PCI / PCIe FireWire card.MUST

At least one Safﬁre will require the external PSU when connected in this way.

Controlling Dual Units

Safﬁre MixControl allows control of two units from the same interface. One unit is displayed at a time. To

switch focus between units, click on the name ﬁeld.

Naming Units

Connected units can be renamed so they may be more easily distinguished in a dual device environment.

Right-click on the name ﬁeld to rename the unit. Note that the name may take a short time to update.

Master Sync Device

When dual Safﬁre devices are connected to one computer via FireWire, the two devices will automatically sync together with no

need for any additional cable connections. However one device will be set as the Master Sync Device.

Click on the settings menu to select which unit is the Sync Master.

Master Slave

Sample rate and digital sync settings can only be set when Safﬁre MixControl has control of the Master Sync Device. When

controlling the slave device, sample rate and sync status are greyed out.

When connecting any external digital devices, the external sync source (Word Clock, ADAT or S/PDIF) must always be connected

to the Master Sync Device. If additional digital units are connected, then they must also be slaved to the device providing sync

to the Master Sync Device. If the Master device is providing an external sync source to a digital unit, then the digital unit can be

connected to either master or slave device.

DAW input and output stream order

The input and output streams of both units will be combined into a single list when viewed from the DAW, or as seen by the

operating system audio preferences when outputting sound from iTunes/Windows Media Player.

Each connected Safﬁre will have a (ﬁxed) hardware ID. Inputs and outputs from the Safﬁre with the lowest hardware ID will

always appear ﬁrst in the list.

Mac Users: Click on “About Safﬁre MixControl” from the ‘Safﬁre MixControl” menu to ﬁnd the hardware ID of the unit currently

in focus.

Windows Users: Click on “About Safﬁre MixControl” from the

“Help” menu to ﬁnd the hardware ID of the unit currently in

focus.

Especificaciones del producto

Marca:	Focusrite
Categoría:	sistema de alta fidelidad
Modelo:	Saffire PRO 14
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Draaiknop
Color del producto:	Bruin
Peso.:	7500 g
Ancho:	422 mm
Profundidad:	281 mm
Altura:	446 mm
Peso del embalaje:	9500 g
Ancho del embalaje:	465 mm
Empaquetadura en profundidad:	325 mm
Altura del embalaje:	500 mm
con horno:	Nee
Fuente-de-alimentación:	Batterij/Accu
Activos:	2200 W
Instrucciones:	Ja
Adecuado para habitaciones de hasta:	32 m²
Temperatura-ajustable:	Ja
Número soportado de baterías/baterías:	2
Certificación:	ISO 9000:2000
Apagado-automático:	Ja
Contrafuegos incluido:	Nee
Interruptor de seguridad:	Ja
Eficiencia:	99.99 procent
Tipo de Batería:	D
Adecuado para volúmenes de habitación de hasta:	80 m³
Productos por contenedor intermodal (40 pies - High Cube):	895 stuk(s)
Productos por contenedor intermodal (20 pies):	392 stuk(s)
Productos por contenedor intermodal (40 pies):	816 stuk(s)
Sensor de temperatura:	Ja
Capacidad del tanque de combustible:	4 l
El consumo de combustible:	183 g/uur
Incluye funda para transporte.:	Ja
tiempo de combustión:	17.5 uur
Lonthoogte:	10 mm