Foscam HT2 Manual de Usario

Foscam Cámara de vigilancia HT2

Lee a continuación 📖 el manual en español para Foscam HT2 (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
2 Physical Description
V1.2
305503000464
Quick Setup Guide
Wireless PTZ Dome IP Camera
Security Tips
Package Contents
Setting Up Your Foscam
Security Camera
1
Getting Started
Power Adapter
IP Camera
Wi-Fi Antenna
Warning:
LAN
Power
Lens
Antenna
Microphone
LED
Speaker
Micro SD Card Slot
Reset Button
Mounting Bracket
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please visit
foscam.com/downloads.
Please change the camera's password regularly, using a combination
of numbers, letters and special characters.
We recommend that you regularly update your camera with the
latest available software and rmware to ensure the best experience
with your camera.
The cords on this product are a potential strangulation hazard. For child
safety, please keep these cords out of the reach of children.
3
Setting Up Your Camera:
the Wired Connection via Foscam
App (Recommended)
To ensure a smoother video experience on your smart phone, it is
recommended that your smart phone meet the following specications:
iOS: version 8.1 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
1. Please tighten the antenna clockwise and make sure it is in a vertical
position.
Wired Connection
Tighten
clockwise
2. Connect the camera to your router with an Ethernet cable.
3. Plug the power adapter into the camera, and then wait for about 1
minute.
4. Make sure your smart phone is connected to the same WiFi network as
the camera.
WiFi connec tion
4
Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks,
so you can choose the channel with the stronger signal to use.
For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.
Foscam_1
Foscam_2
xxxxx_2.4G
xxxxx_5G
5. Open the foscam APP and please register a Foscam account, or sign in if
you have one already.
WPSWPS
Router
Note: For the best experience, please update the APP to the latest version!
Quick Setup Guide
Q uick S etup Gui de
Wire les s P T Z Dom e IP Cam era
Ethernet Cable
6. After logging into Foscam APP, select “Tap to add a camera” or " " +
icon on the upper right corner, then select " " and Scan the QR code
scan the QR code that labeled at the bottom of your camera.
Scan the QR code which
is located at the bottom
of your camera.
Tap + icon
Tap to add a camera
Add Device
<
Scan the QR code
Search in LAN
Manually add
Select ”Scan
the code”
Scan QR Code
<
Mo del: XXX
M AC ID:000000000000
Username(default ):admin
Pass word(default ):(blank)
DDNS:XXX XXX.
myfoscam.org
FCC ID:X XXXX
IC:12558A-XX
S/N:F I AI14 03 000 00 1
UID:XXXXXXXXXXX
FHD Wi re le s s I P Cam e ra
7. There are two options in the following steps, please pay attention to
choose the corresponding adding method.
7.1 Please wait for a few seconds, you can tap "Congure WiFi" in
"Congure WiFi" interface, then select your WiFi network and enter
your WiFi's password. After, you can set the camera name and tap
“ ” in "Set name" interface.Save
Configure WiFi
Configure WiFi
Congure WiFi
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
Select your WiFi
Network and enter
your WiFi's password
Camera added
successfully and
name has been set
WiFi Settings
WiFi_1
WiFi_2
WiFi_3
WiFi_4
No WiFi Configuration
Select WiFi Network...
Note: It is strongly recommended that you choose to congure WiFi at
this step.
Skip
7.2 Please wait for a few seconds, you can tap "Congure WiFi" in
"Congure WiFi" interface, then you tap " " in the "WiFi Settings" Skip
interface. After, you can set the camera name and tap “ ” in "SetSave
name" interface.
Configure WiFi
Configure WiFi
Congure WiFi
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
Tap” Skip” Camera added successfully
and name has been set
WiFi Settings
WiFi_1
WiFi_2
WiFi_3
WiFi_4
No WiFi Configuration
Select WiFi Network...
Skip
Screwdriver
5 Hardware Installation
1. Screw the mount on the wall with the two screws provided.
2. To attach the camera base A to the mounting bracket B, insert the
base into the bracket as pictured.
3. Screw the camera to the wall with the two screws provided.
7 Product Performance
WLAN frequency range: 2412MHz - 2472MHz and 5725MHz - 5875MHz
Maximum transmission power: < 18.5dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz)
Power Supply: DC 12V 2.0A 24W
Please ensure that the proper power supply is used before using the
camera.
Please install the camera securely using the screws provided.
Please use this product within the temperature range. When the
ambient temperature is too high or too low, it may cause product
failure.
To avoid the risk of fre re or electric shock, please keep your camera
connectors in a cool, dry place.
Please keep the camera out of reach of small children.
This product is not a toy; children should use the product under
under adult supervision.
Change your default port to a greater range to help ensure the
safety of your connection. How to change the default port: please visit
foscam.com/downloads to view the user manual.
Check the logs of your Foscam cameras frequently. Foscam Foscam
Cameras have embedded logs reminding telling you which IP
addresses addresses are accessing the camera.
Safety Tips
If you have problems with your Foscam device, please contact the reseller
you purchased from, or you can e-mail the headquarters technical support
team: support@foscam.com
Your valuable comments and suggestions on improving Foscam
products are welcomed!
8 Technical Support
CE Certificate statement Website:
https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
https://www.foscam.com/company/open-information.html
www.foscam.com
Due to product upgrades and other reasons, this guide may be slow to update,
resulting in slight inconsistencies with the ocial website information. Please take
the ocial website (www.foscam.com) information as the current standard.
Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd
Addr: Room 901 Unit B, Building 7, Xingke 1st Street,
Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, 518055, China
A
B
8. Tapping on the play button in the video box will jump to the “Camera
Login” setting interface. For your security, please set a new username
and password for your camera before viewing live video.
Set a new username
and password
Camera Login
New camera username
Re-enter new camera
password
New camera password
Tap “ ”
Foscam_camera
On
Submit
9. After completing the above steps, you can begin using your camera.
Note: step 7.2 If you choose installation , please refer to the following
steps for conguring WiFi . After setting your WIFi, you can unplug
your network cable and the camera works normally.
Configure WiFi
Foscam_camera Settings
Camera Info
Share Camera
WiFi Settings
Sleep Mode
Advanced Settings
Syn c Time, IR L ED Se ttings, etc
My Plan Alarm SD Card Firmware
OFF
Reboot Camera
Delete Camera
WiFi Settings
WiFi_1
WiFi_2
WiFi_3
WiFi_4
No WiFi Configuration
Select WiFi Network...
Tap button Select”WiFi Settings”
Select your WiFi
Network and enter
your WiFi's password
If you selected " " in , click play to enter the camera credentials Skip step 7
interface > Tap the “ ” button > tap “WiFi Settings” > select your WiFi
network and enter your WiFi’s password. After setting up successfully,
you can view live video without the Ethernet cable.
Note: If the adding process fails, please reset your camera and try
adding again according to the above method.
Reset Button
4
Other Ways to Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is
compatible with Windows & Mac, supporting all Foscam HD cameras and
up to 36 cameras at the same time. If you would like to manage multiple
cameras, we suggest you install Foscam VMS. You can download the
“Foscam VMS ” Windows version from foscam.com/vms, and can
download the "Foscam VMS" Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the "+" icon on the Foscam VMS and follow the setup wizard to
add your camera.
Please visit to view the user manual and for foscam.com/downloads
additional detailed steps.
Note: For the best experience, please update Foscam VMS to the
latest version!
You can access the camera via the Foscam Cloud website:
https://www.myfoscam.com
Some benets of viewing your camera in the cloud:
It’s simple and convenient to remotely access and manage all your
WiFi security cameras.
Enjoy the latest features rst through Foscam Cloud including cloud
storage and more.
Getting started is fast—if you have already registered an account in
the Foscam App, you can directly use the same login credentials for
Foscam Cloud.
Foscam Cloud Service
Foscam Cloud
6 Important Notice
Your Foscam Cloud service account and password may be used to
access both the Foscam App and the Foscam Cloud service website.
Therefore, you can register your account username & password on
either one.
Foscam Cloud Service Account PasswordUsername &
Storage Media
Your camera supports cloud, NVR (Network Video Recorder), and
Micro SD card (only supports FAT-32 format) storage formats. If you
wish to record and play back large amounts of video, we
recommend using a Foscam NVR device as well.
You can upgrade the rmware of your camera with the Foscam App
by using the new "One-Key Online Upgrade" feature (Open the
Foscam App and Login to the camera, select Settings > Firmware
Upgrade).
You also can download the latest version to upgrade your camera
from our ocial website . foscam.com/upgrades
Firmware Upgrade
Camera Username & Password
The camera username & password are used to access and manage
your camera. Having a strong password can signicantly improve
the security of your camera.
If you have forgotten either of them, please press the "Reset" button
and hold it for more than 10 seconds while the camera is powered
on. After release the button. The camera will automatically reboot
and the default settings will be restored.
You can then reconnect the camera by following this Quick Setup
Guide.

Especificaciones del producto

Marca: Foscam
Categoría: Cámara de vigilancia
Modelo: HT2

¿Necesitas ayuda?

Si necesitas ayuda con Foscam HT2 haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Foscam Manuales

Foscam

Foscam C1 Lite Manual de Usario

15 Octubre 2024
Foscam

Foscam FI9900EP Manual de Usario

14 Octubre 2024
Foscam

Foscam FI9938P Manual de Usario

6 Octubre 2024
Foscam

Foscam C2M Manual de Usario

5 Octubre 2024
Foscam

Foscam R5 Manual de Usario

3 Octubre 2024
Foscam

Foscam C2M-B Manual de Usario

30 Septiembre 2024
Foscam

Foscam FI9816PB Manual de Usario

28 Septiembre 2024
Foscam

Foscam R2 Manual de Usario

27 Septiembre 2024
Foscam

Foscam V8P Manual de Usario

16 Septiembre 2024
Foscam

Foscam SD4H Manual de Usario

13 Septiembre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024