Frigidaire FHWH084WB1 Manual de Usario

Frigidaire aire acondicionado FHWH084WB1

Lee a continuación 📖 el manual en español para Frigidaire FHWH084WB1 (20 páginas) en la categoría aire acondicionado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

Fig. C

Fig. B

READ BEFORE INSTALLING UNIT

Compact Window Mounting (8,000~12,000 BTU)

Installation Instructions

Before installing, the top rail must be assembled on the unit.

Top Rail Hardware Qty.

Top Rail

The top rail on your unit may already be installed. If not,

follow the steps below.

Drill (If pilot holes are needed)

the best way to store unit during winter, or when not

in use.

Mounting Hardware Qty.

( or Wooden windows)

weather stripping

(10”X3/4”X1/12”) 5

window sash seal foam 1

Top Rail

The unit is for window mounting only.

INSTALLATION WARNINGS AND CAUTION

Pay attention to danger and safety notices.

be exposed:

Carefully inspect location where air conditioner will be inst

period of time.

Handle air conditioner with care.

Carefully read the installation manual before beginning.

16120300A29476

Side louvers and the rear of the air conditioner must have clear air space to allow enough airflow through the

The appliance with electric heater shall have at least 1 meter space to the combustible materials.

condenser, for heat removal. The rear of the unit must be outdoors, not inside a building or garage. There should be

at least 11.8

inches (300mm) clearance around the unit. See FIG. 4C & FIG. 4D.

Indoor side

Outdoor side

11.8" min

(300 mm)

11.8" min

(300 mm)

11.8" min

(300 mm)

11.8" min

(300 mm)

11.8" min

(300 mm)

11.8" min

(300 mm)

11.8" min (300 mm) 11.8" min (300 mm)

11.8" min (300 mm)

FIG. 4D

FIG. 4C

11.8" min (300 mm)

Outdoor side Indoor side

NOTE: Top Rail and Side Panels at each side are offset to provide the proper pitch to the rear of (5/16”).

This is necessary for proper condensed water utilization and drainage. If you are not using the Side Panels

for any reason, this pitch to the rear must be maintained!

Place unit on floor, a bench or a table. There is a Left and Right side Filler Panels - be sure to use the proper

panel for each side. When installed, the flange for securing the panel in place to the window sill will be facing

into the room.

A. Hold the side Panel in one hand and gently pull back the center to free the open end. See FIG. 1.

B. Slide the free end “ ” section of the panel directly into the cabinet as shown in FIG. 2. Slide the panel down. Be

sure to leave enough space to slip the top and bottom of the frame into the rails on the cabinet.

LEFT + RIGHT FILLER PANEL ASSEMBLY

FIG. 1

C. Once the panel has been installed on the side of the cabinet, make sure it sits securely inside the frame channel by

making slight adjustments. Slide the top and bottom ends of the frame into the top and bottom rails of the cabinet. See

FIG. 3.

D. Slide the panel all the way in and repeat on the other side.

Installation

Top Rail

Bottom Rail

Your air conditioner is designed to install in standard double hung windows with opening widths of 25 to 36 inches

(635mm to 914 mm) (FIG. 4A & FIG. 4B)

Lower sash must open sufficiently to allow a clear vertical opening of 15-1/2 inches (394 mm ).

Fig. 4A

394 mm

Wooden Windows

Fig. 4B

394 mm

Vinyl-Clad Windows

INNER

WINDOW SILL INNER

WINDOW SILL

INTERIOR

WALL

“ ” section

FIG. 2 FIG. 3

25" to 36"

635mm to 914mm

25" to 36"

635mm to 914mm

Installation

Especificaciones del producto

Marca:	Frigidaire
Categoría:	aire acondicionado
Modelo:	FHWH084WB1
Color del producto:	Zwart
Peso.:	1180 g
Ancho:	165 mm
Profundidad:	279 mm
Altura:	117 mm
Instrucciones:	Ja
Cables suministrados:	AC, Thunderbolt
Certificados de sostenibilidad:	RoHS
Soporta Windows:	Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64
Interno:	Nee
Soporta el sistema operativo Mac:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Interfaz de host:	Thunderbolt 3
Temperatura de funcionamiento (TT):	0 - 35 °C
Estándar de tarjeta de expansión:	PCI 3.0
Interfaz de salida:	PCIe