Funai F413TB Manual de Usario

Funai Television F413TB

Lee a continuación 📖 el manual en español para Funai F413TB (8 páginas) en la categoría Television. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

This TV can receive C1 and C2 of Caption and Text.

Caption Mode

(1)Characters can be displayed on the TV screen when the received broadcast signal contains the

Caption Signals.

(2)Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

Note: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will

not be displayed.

Text Mode

(1)Displays the text on the screen by scrolling (max. 7 lines)

(2)If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a

VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

(2)Captions and texts may not match the TV voice exactly.

(3)Interference may cause the closed caption system not to function properly.

(4)The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

(5)If you see this screen!!

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To

clear screen, select CAPTION C1, C2 or CAPTION [OFF].

ANTENNA/CABLE CONNECTIONS

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

FEATURES

●Tinted, Bright Black Matrix Picture Tube

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic

tuning system provides free and easy channel selection, and lets you tune directly to any chan-

nel using the channel number buttons (0~9 and +100-key) on the remote control.

●On-Screen Function Display.

●Full-Function Remote Control

●Sleep Timer

●Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,

prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●Auto Shut Off Function- If there is no air signal input from the antenna terminal and no

operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

COLOR TELEVISION

F413TB (13 inch)

F419TB (19 inch)

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

ANT.IN

CLOSED CAPTION

UHF

Antenna

(Not supplied)

VHF

Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combination Antenna

(Not supplied)

UHF/VHF Rod

Antenna

(Supplied with 13

inch model only)

OR OR

ANT. IN

OUT IN

75-ohm

Coaxial Cable

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

CATV Box *

or Satellite Box

(Not supplied)

*Some cable TV systems use scram-

bled signals and require a special con-

verter to receive these channels.

Consult your local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of

the NEC that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as close to the point

of cable entry as practical.

FCC WARNING- This equip-

ment may generate or use radio

frequency energy. Changes or

modifications to this equipment

may cause harmful interference

unless the modifications are

expressly approved in the

instruction manual. The user

could lose the authority to oper-

ate this equipment if an unau-

thorized change or modification

is made.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-242-7158.

Owner’s

Manual

FUNAI CORPORATION

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as fol-

lows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail pur-

chase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not

apply to any the product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does

not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-

plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-

ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or

damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANYACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-

TIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED

SERVICE FACILITY.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS

COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT

VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or general service procedure, please

call 1-800-242-7158 or write to the following:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-242-7158

PLEASE DO NOT SHIPYOUR UNIT TO THE TETERBORO ADDRESS.

0EMN01853 Printed in China

L1351UB * * * * *

This Owner’s Manual is made of recycled paper.

(13” model only)

Before plugging the UHF/VHF Rod

Antenna into the ANT(enna). IN jack, check

that the pin is not bent. If it is bent, straight-

en the pin as illustrated, then plug the pin

into the ANT(enna). IN jack.

Bent pin

Cable Plug

(Needs to be straightened) (Straight pin)

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲or button.▼

INSTALLING THE BATTERIES

Slide the battery compartment cover on the

remote unit.

Insert 2 "AA" penlight batteries into battery

compartment in the direction as indicated by

the polarity (+ / -) markings. Batteries installed

with incorrect polarity may damage the remote

unit.

Replace the cover.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by

the manufacturer, or sold with the

TV.

Any mounting of the appliance

should follow the manufacturer’s

instructions and should use a

mounting accessory recommended

by the manufacturer. An appliance and cart combina-

tion should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance

and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

PORTABLE CART WARNING

S3126A

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and exten-

sion cords as this can result in a risk of fire or electric

shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E LE CT R I C

SE R VICE

EQU IPMENT

GRO U ND

CLAMP

NE C - NAT I ONA L ELE CT RIC AL CODE POW ER SER V ICE G R OUND ING

ELE CT R O D E SYSTEM

(NE C ART 2 5 0 , P A RT H)

S 2 8 9 8 A

GRO U ND CLAMP S

GRO U NDI NG COND U CTOR S

(NE C SE CT IO N 8 1 0 -2 1 )

A NT E NN A

DISCHAR G E U NIT

(NE C SE CT IO N 8 1 0 -2 0 )

A NT E NN A

LE A D I N

WIR E

OPERATING CONTROLS AND FUNCTIONS

POWER

MENU VOLUME CHANNEL

1 2 3 4 5

ANT.IN

- FRONT PANEL - - REAR PANEL -

1. MENU button- Press to display the menu

on the TV screen.

2. VOLUME ▲ ▼/ buttons- Press to control

the volume level.

Press to determine a setting mode from the

menu on the TV screen. (only the VOL ▲

button)

Press to select or adjust from a particular

menu. (for example: Language Selection,

Channel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

3. CHANNEL ▲ ▼/ buttons- Press to select

memorized channel.

Press to select a setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

4. POWER button- Press to turn the TV ON

and OFF.

5. Infrared Sensor Window- Receives the

infrared control signals from the remote

control unit.

6. CHANNEL NUMBER button- Press two

digits to directly access the desired channel.

Remember to press a "0" before a single

digit channel.

+100 button- Press to select cable channels

which are equal or greater than number 100.

7. MUTE button- Press the MUTE button to

turn off the sound portion of the TV pro-

gram. (Volume level display turns LIGHT

RED from LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume)

▲ ▼or button to restore sound.

8. CHANNEL RETURN button- Press this

button to go back to the previously viewed

channel. For example, pressing the CHAN-

NEL RETURN button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

from CH 10 to CH 3.

9. DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

10.SLEEP button- Press the SLEEP button to

display the sleep timer and start the func-

tion. The shut off time can be determined

by the number of times you press the but-

ton. (0, 10, 20, 30,..90, 0 minutes)

11.ANT(enna). IN jack- Connect to an anten-

na, cable system, or satellite system.

12.AC cord- Connect to a standard AC outlet

(120V/60Hz).

NOTE: Remove the AC cord from the

hook to avoid breaking the wire before you

connect to a standard AC outlet.

POWER

1 2 3

4 5 6

7 8 9

0 +100

DISPLAY

VOL

SLEEP

CHANNEL

RETURN

MUTE

This manual covers 13" and 19". The operation of the two models are exactly the same except the appearance. 19" model is illustrated in this manual.

- REMOTE CONTROL -

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

Connect the power cord to a standard AC outlet.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears

on the TV screen.

Press the CH(annel) button to point to "[ENGLISH]".▲or ▼

Select "ENGLISH" or "ESPAÑOL" = Spanish by using

the VOL(ume) ▲or button.▼

Press the MENU button to exit the menu.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears

on the TV screen.

Press the CH(annel) button to point to "CHANNEL SET". ▲or ▼

Then, press the VOL(ume) ▲button.

Press the CH(annel) button to point to "AUTO MEMO". ▲or ▼

Then, press the VOL(ume) ▲button.

The tuner scans and memorizes all active channels in

your area.

●The TV distinguishes between standard TV channels

and cable (CATV) channels.

●When AUTO MEMO action is completed, the lowest

memorized channel reappears on the screen.

●When you press the CH(annel) ▲ ▼or button after

selecting AUTO MEMO, the tuner will stop at the memorized

channels only.

●The TV may detect TV channels as CATV channels

if the receiving conditions are poor. In this case, try AUTO MEMO action again when receiving

conditions are better.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) button to point to "CHANNEL SET". ▲or ▼

Then, press the VOL(ume) ▲button.

3) Press the VOL(ume) button so that "ADD/DELETE" is selected.▲

4) Use the CH(annel) button to select the ▲or ▼

channel you wish to put into memory or to erase from memory.

Note: The display will return to a normal screen in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the

screen.

●Press the VOL(ume) ▲ ▼or button to light up the channel number

in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ ▼or button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly when the power resumes.

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

ADD/DELETE

AUTO MEMO

ADD/DELETE

AUTO MEMO

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

OPERATIONS

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲or button.▼

3) Adjust the volume to the desired listening level using the VOL(ume) ▲or button.▼

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing

the POWER button after a desired time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP

button on the remote control repeatedly. The timer can be set up

to 90 minutes, 10 minutes each time the SLEEP button is

pushed. (The timer display counts up and sleep timer will

be displayed on the screen when you press the SLEEP

button on remote control.)

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the

sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated-

ly until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-

grams, movies, news, prerecorded tapes, etc.

with either a dialogue caption or text display

added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲or ▼

to "CAPTION".

3) Press the VOL(ume) button to select▲or ▼

the mode you wish.

4) When done, press the MENU button to exit

the menu.

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ C1]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ C2]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ T1]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [ T2]

: Press the VOL(ume) ▲ ▼or button.

GAME MODE

Set to the most suitable position for TV

GAME.

[+] : ON

[-] : OFF

BRIGHT

Adjust until the whitest parts of the picture are

as bright as you prefer.

[+] : increase brightness

[-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast

[-] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color

[-] : be pale color

TINT

Adjust to obtain natural skin tones.

[+] : greenish tone

[-] : reddish tone

Notes:

●In the above steps, the picture adjustment

display will disappear from the TV screen

automatically after about 10 seconds if you

do not press any buttons, even though you

may not be finished. Press the MENU and

VOL(ume) ▲button so that "PICTURE" is

selected. Then, press the CH(annel) ▲or ▼

button repeatedly until the display returns to

the screen.

●If you adjust the other Picture control after

you set the Game mode to [ON], the Game

mode is set to [OFF] automatically. If you

want to set the Game mode, reset it to [ON].

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the VOL(ume) button so that "PICTURE" is selected.▲

3) Select the feature you wish to adjust with the CH(annel) button and adjust it with the▲or ▼

VOL(ume) or button.▲ ▼

[-] GAME MODE [+]

OFF ON

[-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+]

: Press the CH(annel) ▲or button.▼

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

[ENGLISH]ESPA OLÑ

V-CHIP SET UP

CAPTION [OFF]

Especificaciones del producto

Marca:	Funai
Categoría:	Television
Modelo:	F413TB

¿Necesitas ayuda?

Si necesitas ayuda con Funai F413TB haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Television Funai Manuales

Funai F4819T Manual de Usario

12 Octubre 2024

Funai F9TRB1 Manual de Usario

4 Octubre 2024

Funai 32FW502 Manual de Usario

23 Septiembre 2024

Funai 32FDV5755 Manual de Usario

12 Septiembre 2024

Funai LED19T800 Manual de Usario

27 Agosto 2024

Funai LCD-C2726 Manual de Usario

16 Agosto 2024

Funai F413TB Manual de Usario

15 Agosto 2024

Funai LC5-D32BB Manual de Usario

13 Agosto 2024

Funai LH850-M32 Manual de Usario

6 Agosto 2024

Funai LCD-C3206 Manual de Usario

3 Agosto 2024

Television Manuales

Últimos Television Manuales

Finlux 48FFA4110 Manual de Usario

27 Octubre 2024

Continental Edison CELED55120B2 Manual de Usario

27 Octubre 2024

Sylvania 6620LDF Manual de Usario

27 Octubre 2024

Finlux CT1412T DVD Manual de Usario

27 Octubre 2024

Xoro HTC 2240 HD Manual de Usario

27 Octubre 2024

Sharp LC-32LX705 Manual de Usario

27 Octubre 2024

Sharp 65BJ5K Manual de Usario

27 Octubre 2024

Daitsu DL32 Manual de Usario

27 Octubre 2024

Nevir NVR-7200-19SD-B Manual de Usario

27 Octubre 2024

GoGEN TVU50V47FE Manual de Usario

27 Octubre 2024