Furuno FA-150 Manual de Usario

Furuno No categorizado FA-150

Lee a continuación 📖 el manual en español para Furuno FA-150 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

FA-150 UAIS TRANSPONDER

Operator’s Guide

The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For more

detailed information see the Operator's Manual.

MENU ENT

DISP DIM

FA-150

NAV

STATUS

PWR

UNIVERSAL AIS

Opens the menu.

Shifts cursor; chooses menu

items and options; enters

alphanumeric data.

Terminates keyboard input;

changes screen.

Adjusts panel dimmer and

LCD contrast.

Displays nav status menu,

which sets up for a voyage.

Turns the power on and oﬀ.

Chooses a display screen; closes menu.

[FURUNO]

HDG: 111°

SOG: 10

COG: 111°

CPA: 6.19

TCPA: 12'59"

INTRD: 1

Selected target

(circle ﬁlled in black)

Target (hollow circle)

Own ship

course marker

Display range RNG: 6 DETAIL:[ENT]

Target name

Heading

Speed

Course

CPA

TCPA

Dangerous target

(Target whose CPA and TCPA are lower

than CPA and TCPA alarm settings.)

Lost target

Number of dangerous

targets

Data for target

selected

Plotter display

www.furuno.co.jp

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

SOLAS MODE OPERATIONS

How to set up for a voyage

1. Press the NAV STATUS key.

[NAV STATUS]



NAV STATUS: 0

***

STATUS DETAIL

***

UNDER WAY USING

ENGINE

2. If your navigation status is different

from that shown, do a) and b) below. If

it is the same as shown, go to step 3.

a) Press the ENT key.

b) Press ▲ ▼ or to choose

appropriate status and then

press the ENT key.

3. Press ► to show page 2 of the NAV

STATUS menu.

[DESTINATION]

*************

(0/0)

[NEW?]

4. NEW is selected; press the ENT key.

[DESTINATION]

ENTER A NEW

DESTINATION

QUIT:[NAV STATUS]

5. Press the ENT key. Use the

CursorPad to enter destination and

then press the ENT key.

6. Press ► to show page 3 of the NAV

STATUS menu.

[ARRIVAL TIME]

DATE - -/- - -[UTC]:

TIME[UTC]: - -*- -

7. DATE is selected; press the ENT key.

8. Use the CursorPad to enter the date

of arrival and then press the ENT key.

9. TIME is selected; press the ENT key.

10. Use the CursorPad to enter the

estimated time of arrival and then

press the ENT key. Use 24-hour

notation.

11. Press ► to show page 4 of the NAV

STATUS menu.

[CARGO TYPE & CREW]

CREW: 0

TYPE NO: 00

**** TYPE DETAIL****

NOT AVAILABLE

12. CREW is selected; press the ENT key.

13. Use the CursorPad to enter number of

crew and then press the ENT key.

14. TYPE NO. is selected; press the ENT

key.

15. Use the CursorPad to choose type of

vessel and then press the ENT key.

16. Press ► to show page 5 of the NAV

STATUS menu.

[DRAUGHT]

DRAUGHT: m0.0

17. Press the ENT key.

18. Use the CursorPad to enter ship’s

draught, and then press the ENT key.

19. Press the DISP key to close the menu.

How to send a message

1. Press the MENU key.

2. Use ▼ ▲ or to choose MSG and then

press the ENT key.

[MSG]

CREATE MSG

TX LOG

RX LOG

3. CREATE MSG is selected; press the

ENT key.

[CREATE MSG]

SET MSG TYPE

SET MSG

SEND MSG

4. SET MSG TYPE is selected; press the

ENT key.

[SET MSG TYPE]

ADRS TYPE: BROAD CAST

MMSI : - - - - - - - - -

MSG TYPE : NORMAL

CHANNEL: ALTERNATE

MMS

5. ADRS TYPE is selected; press the

ENT key.

BROAD CAST

ADRS CAST

6. Choose ADRS CAST or BROAD CAST

as appropriate. Press the ENT key.

7. For BROAD CAST, go to step 8. For

ADRS CAST, “MMSI” is selected; press

the ENT key, use the CursorPad to

enter MMSI number of receiving vessel

and then press the ENT key.

8. MSG TYPE is chosen; press the ENT

key.

SAFETY

NORMAL

9. Choose message type: NORMAL

(message other than safety) or

SAFETY (important navigational or

meteorological warning). Press the

ENT key.

10. CHANNEL is chosen; press the ENT

key.

ALTERNATE

BOTH A & B

11. Choose which channel to transmit your

message over.

12. Press the ENT key.

13. Press the MENU key to return to the

CREATE MSG sub-menu.

14. Choose SET MSG and press the ENT

key.

15. Use the CursorPad to enter your

message. Use ▼ or ▲ to choose

character; ◄ or ► to shift the cursor.

16. Press the ENT key to return to the

CREATE MSG sub-menu.

17. Choose SEND MSG; press the ENT

key to send your message.

18. Press ◄ to choose YES; press the

ENT key.

How to set CPA/TCPA

1. Press the MENU key.

2. Use ▲ ▼ or to choose USER

SETTINGS and then press the ENT

key.

3. Use ▲ ▼ or to choose CPA/TCPA

ALARM and then press the ENT key.

[CPA/TCPA ALARM]

CPA : nm6.00

TCPA : 60 min

ALARM MODE : ON

ALARM BUZZER: ON

QUIT[MENU]

4. CPA is selected; press the ENT key.

5. Use the CursorPad to enter CPA and

then press the ENT key.

6. TCPA is selected; press the ENT key.

7. Use the CursorPad to enter TCPA and

then press the ENT key.

8. ALARM MODE is selected; press the

ENT key.

9. Choose ON to enable the CPA/TCPA

alarm feature; OFF to disable it. Press

the ENT key.

10. ALARM BUZZER is selected; press

the ENT key.

11. Choose ON to enable the CPA/TCPA

audio alarm, or OFF to disable it. Press

the ENT key.

12. Press the DISP key to close the menu

INLAND AIS OPERATIONS

How to select INLAND AIS mode

1. Press the NAV STATUS key.

[NAV STATUS]



NAV STATUS: 15

AIS MODE: SOLAS

***

STATUS DETAIL

***

NOT DEFINED

(DEFAULT)

2. Push ▼ to select AIS MODE then

press the ENT key.

SOLASRX

INLAND

3. Select INLAND then press the ENT

key.

How to enter voyage-related data

1. Press the NAV STATUS key.

[NAV STATUS]



NAV STATUS: 0

AIS MODE: INLAND

***

STATUS DETAIL

***

UNDER WAY USING

ENGINE

2. Press ► to show the DESTINATION

sub-menu.

[DESTINATION]

*************

(0/0)

[NEW?]

3. NEW is selected; press the ENT key.

[DESTINATION]

ENTER A NEW

DESTINATION

QUIT:[NAV STATUS]

4. Press the ENT key. Enter destination

(20 characters max.) then press the

ENT key.

5. Press ► to show the ARRIVAL TIME

sub-menu.

[ARRIVAL TIME]

DATE - -/- - -[UTC]:

TIME[UTC]: - -*- -

6. DATE[UTC] is selected; press the ENT

key.

7. Enter the date of arrival then press the

ENT key.

8. TIME[UTC] is selected; press the ENT

key.

9. Enter the estimated time of arrival then

press the ENT key. Use 24-hour

notation.

10. Press ► to show the DRAUGHT

sub-menu.

[DRAUGHT]

SOLAS DRAUGHT: m0.0

INLAND DRAUGHT:

0.00m

11 SOLAS DRAUGHT is selected; press

the ENT key.

12. Enter SOLAS draught then press the

ENT key.

13. INLAND DRAUGHT is selected; press

the ENT key.

14. Enter inland draught then press the

ENT key.

15. Press ► to show the CARGO TYPE

sub-menu.

[CARGO TYPE]

TYPE NO.: 00

**** TYPE DETAIL****

NOT AVAILABLE

16. TYPE NO. is selected; press the ENT

key.

17. Select type of vessel/cargo then press

the ENT key.

18. Press ► to go to the ERI CODE

sub-menu.

[ERI CODE]

ERI CODE: 8000

****CODE DETAIL****

VESSEL,

TYPE UNKNOWN

19. ERI CODE is selected; press the ENT

key.

20. Enter four-digit ERI code then press

the ENT key.

21. Press ► to go to the NO. OF

PERSONS sub-menu.

[NO. OF PERSONS]

CREW: _ _ _

PASSENGER: _ _ _ _

SHIPBOARD PERSONNEL

_ _ _

NO. OF PERSONS: 0

22. CREW is selected; press the ENT key.

23. Enter number of crew then press the

ENT key.

24. PASSENGER is selected; press the

ENT key.

25. Enter number of passengers then

press the ENT key.

26. SHIPBOARD PERSONNEL is

selected; press the ENT key.

27. Enter number of shipboard personnel

then press the ENT key.

28. NO. OF PERSONS is selected; press

the ENT key.

29. Enter the total number of persons then

press the ENT key.

30. Press ► to go to the LENGTH&BEAM

sub-menu.

[LENGTH&BEAM]

LENGTH OF SHIP

m0.0

BEAM OF SHIP: 0.0 m

31. Enter the length and beam of your ship,

pressing the ENT key after entering

each item.

32. Press ► to go to the OTHER

sub-menu.

[OTHER]

DYNAMIC INFORMATION

RATE: AUTO

HAZARDOUS CARGO:

UNKNOWN

UN/LOADED: UNKNOWN

33. DYNAMIC INFORMATION RATE is

selected; press the ENT key.

AUTO

10SEC

5SEC

2SEC

34. Select option then press the ENT key.

35. HAZARDOUS CARGO is selected;

press the ENT key.

NUMBER OF CONES 0

NUMBER OF CONES 1

NUMBER OF CONES 2

NUMBER OF CONES 3

B-FLAG

UNKNOWN

36. Select appropriate item then press the

ENT key.

37. UN/LOADED is selected; press the

ENT key.

UNKNOWN

LOADED

UNLOADED

38. Select appropriate item then press the

ENT key.

39. Press the DISP key to close the menu.

How to send an ETA message

1. Press the MENU key.

2. Select MSG then press the ENT key.

[MSG]

TEXT

ETA/RTA

NO. OF PERSONS

EMMA WARNING

WATER LEVEL

3. Select ETA/RTA then press the ENT

key.

[ETA/RTA]

CREATE MSG

ETA LOG

RTA LOG

4. CREATE MSG is selected; press the

ENT key.

[CREATE MSG]

SET MSG TYPEE

SET DESTINATION

SET ETA

SEND MSG

5. SET MSG TYPE is selected; press the

ENT key.

[SET MSG TYPE]

MMSI : 000000000

CHANNEL: ALTERNATE

RETRY TIMES: 3

MMS

6. MMSI is selected; press the ENT key.

Especificaciones del producto

Marca:	Furuno
Categoría:	No categorizado
Modelo:	FA-150
Color del producto:	Zilver
Tecnología de conectividad:	Bedraad
Conexión de vídeo:	VGA
Conexión de teclado:	PS/2
Conexión del ratón:	PS/2
Número de computadoras:	2