Garmin GST 10 Manual de Usario

Garmin No categorizado GST 10

Lee a continuación 📖 el manual en español para Garmin GST 10 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
GST™ 10 Installation and Conguration Instructions
Use the Garmin
®
GST 10 sensor adapter to adapt analog information provided by a compatible
water-speed sensor, water-temperature sensor, or combined water-speed and water-temperature
sensor on your boat to your NMEA 2000
®
network. Your GST 10 adapter allows you to observe
water-speed and water-temperature information on the compatible Garmin display devices
connected to your NMEA 2000 network. For a list of compatible Garmin chartplotters and
devices, visit www.garmin.com.
The GST 10 adapter is compatible with the following water-speed and water-temperature
sensors:
Garmin (Airmar ST850) thru-hull water-speed and water-temperature sensor (010-11413-00)
Garmin (Airmar T80) water-temperature sensor (010-11413-01)
Garmin transom-mount water-speed sensor (010-10279-02)
These sensors are sold at your local Garmin dealer and are sold on the Garmin web site at www
.garmin.com.
Compare the contents of this package with the packing list on the box. If any pieces are
missing, contact your Garmin dealer immediately.
Product Registration
Help us better support you by completing our online registration today. Go to http://my.garmin
.com. Keep the original sales receipt, or a photocopy, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while using your GST 10 adapter. In
the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200
or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support and click for in-country support Contact Support
information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
See the Important Safety and Product Information guide in the compatible Garmin display device box for
product warnings and other important information.
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or CAUTION:
sanding.
When drilling or cutting, always check the opposite side of the drilling or cutting NOTICE:
surface.
Needed Tools and Supplies
Cable ties
Additional NMEA 2000 cabling and connectors (optional)
•
•
•
•
•
July 2009 190-01081-07 Rev. A Printed in Taiwan
 GST10InstallationandCongurationInstructions
Determining an Installation Location
When you are selecting a location to install the GST 10 adapter, consider the following:
During installation, you connect the GST 10 adapter to the compatible sensor and to the
NMEA 2000 network, and to the NMEA 2000 network.
Choose a location that is within 173 in. (4.4 m) of the sensor. You cannot extend the
cable connecting the GST 10 adapter to the sensor.
Choose a location between the NMEA 2000 backbone and sensor.
If you cannot connect the adapter directly to the NMEA 2000 network, add a drop cable.
See for more information.below
The adapter is IEC 60529 IPX7 waterproof, and can be submerged up to 30 minutes at 1
meter. Do not install the adapter in a location where it will be submerged regularly, though
the location can be subject to wash-down.
You can use cable ties (not included) to secure the adapter to an existing structure on your
boat.
You can use mounted-head cable ties (not included) and screws (not included) to secure the
adapter to a bulkhead or other suitable surface on your boat.
Install the adapter at least 2 in. (5 cm) from a magnetic compass to prevent electromagnetic
interference, which can cause inaccurate compass readings.
The GST 10 adapter provides temperature readings from -22°F to 194°F (from -30°C to
90°C). Temperature sensor readings beyond those extremes will not be displayed.
Connecting the GST 10 Adapter to a Water-Speed or Water-
Temperature Sensor
The connector opposite the NMEA 2000 connector on the GST 10 adapter is designed to
connect directly to a compatible water-speed or water-temperature sensor. No cutting, splicing,
or additional wiring is necessary.
Connecting the GST 10 Adapter to a NMEA 2000 Network
After you have connected the GST 10 adapter to the sensor, connect it to the existing
NMEA 2000 network on your boat. If you do not have a NMEA 2000 network on your
boat, you must build one. For more information on NMEA 2000 and to purchase additional
connectors and cables, go to www.garmin.com.
To connect the GST 10 adapter to your existing NMEA 2000 network:
1. Determine where to connect the GST 10 adapter to your existing NMEA 2000 backbone.
2. Disconnect one side of a NMEA 2000 T-connector from the backbone. To extend the
NMEA 2000 backbone, connect a NMEA 2000 backbone extension cable to the side of the
disconnected T-connector.
3. Add the included T-connector for the GST 10 adapter to the NMEA 2000 backbone by
connecting it to the side of the disconnected T-connector.
•
◦
◦
◦
•
•
•
•
•
GST10InstallationandCongurationInstructions 
4. Connect the NMEA 2000 connector on the GST 10 adapter to the T-connector added in
step 3.
5. (Optional) If the GST 10 adapter cannot connect directly to the NMEA 2000 backbone, route
a NMEA 2000 drop cable (not included) to the bottom of the T-connector added in step 3.
Use a drop cable with a length up to 20 ft. (6 m). Connect the drop cable to the T-connector
and to the NMEA 2000 connector on the adapter.
If you have an existing NMEA 2000 network on your boat, it should already be notiCe:
connected to power. Do not connect an additional NMEA 2000 power cable to an existing NMEA
2000 network, because only one power source should be connected to a NMEA 2000 network.
➊
➋➋
➌
➍
➎
Connecting the GST 10 Adapter to an
Existing NMEA 2000 Network
➊
GST10adapter
➋
NMEA000device(notincluded)
➌
Dropcable(optional-notincluded)
➍
T-connector(oneincluded)
➎
ExistingNMEA000network
Conguring the GST 10 Adapter
note: This section provides specic conguration information for the GST 10 adapter using
your compatible Garmin display device. To access the NMEA 2000 conguration menu on your
display device, consult the documentation provided with your display device.
Calibrating the Water Speed
To use the GST 10 adapter, you must calibrate the water speed.
1. From the NMEA 2000 Devices list, select the GST 10 device.
2. Select an option:
For most Garmin chartplotters, select > Review Calibrate Water Speed.
For other Garmin marine devices, select > Cong Calibrate Water Speed.
3. Follow the on-screen instructions to calibrate the water speed.
•
•

Especificaciones del producto

Marca: Garmin
Categoría: No categorizado
Modelo: GST 10

¿Necesitas ayuda?

Si necesitas ayuda con Garmin GST 10 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Garmin Manuales

Garmin

Garmin GPS 175 Manual de Usario

20 Octubre 2024
Garmin

Garmin G5 Manual de Usario

17 Octubre 2024
Garmin

Garmin GDT 43 Manual de Usario

14 Octubre 2024
Garmin

Garmin GMR 18 xHD Manual de Usario

5 Octubre 2024
Garmin

Garmin GMM 170 Manual de Usario

4 Octubre 2024
Garmin

Garmin Edge Power Mount Manual de Usario

3 Octubre 2024
Garmin

Garmin GT30-TH Manual de Usario

3 Octubre 2024
Garmin

Garmin GT51M-TH Manual de Usario

2 Octubre 2024
Garmin

Garmin Panoptix PS60 Manual de Usario

1 Octubre 2024
Garmin

Garmin GPS 17HVS Manual de Usario

30 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024