GE JBP71CKCC Manual de Usario

GE horno JBP71CKCC

Lee a continuación 📖 el manual en español para GE JBP71CKCC (12 páginas) en la categoría horno. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
1
31-10620 05-05 JR
Installation
Free-Standing
Instructions Electric Ranges
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
• IMPORTANT —Save these
instructions for local inspector’s use.
• IMPORTANT —Observe all
governing codes and ordinances.
•Note to Installer – Be sure to leave these
instructions with the Consumer.
•Note to Consumer – Keep these
instructions for future reference.
•Skill level – Installation of this appliance
requires basic mechanical skills.
•Completion time – 1 to 3 hours
•Proper installation is the responsibility of
the installer.
•Product failure due to improper installation
is not covered under the Warranty.
WARNING —This appliance must
be properly grounded.
FOR YOUR SAFETY:
WARNING —Before beginning the
installation, switch power off at service panel
and lock the service disconnecting means to
prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
ANTI-TIP DEVICE
WARNING —To reduce the risk
of tipping, the appliance must be secured by
properly installed Anti-Tip bracket packed
with this appliance.
If the Anti-Tip device supplied with the range
does not fit this application, use the universal
Anti-Tip device WB2X7909.
WARNING —
• All ranges can tip
• Injury to persons could result
• Install Anti-Tip bracket packed
with range
• See Installation Instructions
If you pull the range out and away from the
wall for any reason, make sure the Anti-Tip
bracket is engaged when the range is pushed
back against the wall.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com
TOOLS YOU WILL NEED
FOR YOUR SAFETY:
All rough-in and spacing dimensions must be
met for safe use of your range. On ranges
with storage drawers electricity can be
disconnected at the outlet without moving
the range if the outlet is in the preferred
location (remove storage drawer).
To reduce the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can
be reduced by installing a range hood that
sticks out at least 5” beyond the front of the
cabinets. Cabinets installed above a cooktop
must be no deeper than 13”.
Be sure your appliance is properly installed
and grounded by a qualified technician.
Make sure the cabinets and wall coverings
around the range can withstand the temperatures
(up to 200°F.) generated by the range.
2
Installation Instructions
PREPARE TO INSTALL THE RANGE
MATERIALS YOU MAY NEED
Anchor SleevesLag Bolts
(For Anti-Tip Bracket Mounted
on Concrete Floors Only)
3-Wire Cord
4‘ Long
4-Wire Cord OR
4‘ Long
(UL Approved 40 AMP)
Adjustable Wrench
Level
1/4” Nut Driver
Phillips Screwdriver
Drill with 1/8” Bit
Pencil
Safety Glasses
Tape Measure
Pliers
Flat-blade
Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
1
Squeeze Connector
(For Conduit
Installations Only)
Tin Snips
3
Installation Instructions
PREPARE THE OPENING
See illustrations for all rough-in and spacing
dimensions.
The range may be placed with 0” clearance
(flush) at the back wall and side walls of
the cabinet.
NOTE: Use a 4′power cord to prevent
interference with the storage drawer.
Power cords 41 ⁄2to 6′long may have to be
dressed to allow for proper drawer closing.
MINIMUM DIMENSIONS BETWEEN COOKTOP,
WALLS AND ABOVE THE COOKTOP:
***Make sure the wall covering, countertop,
flooring and cabinets around the range
can withstand the heat (up to 200°F)
generated by the range.
*** Allow 30” minimum clearance between
surface units and bottom of unprotected
wood or metal cabinet, and 15” minimum
between countertop and adjacent cabinet
bottom.
*** Recommended spacing to heat-sensitive
surfaces.
2
21⁄2”
21⁄ ”2
71⁄ ”2
25”
36”
30”
Acceptable electrical
outlet area.
Orient the electrical
receptacle so the length
is parallel to the floor.
*0”
**15” Min.
**30” Min.
*0”
***6”
Min.
7”
141⁄ ”2
On models with baking or
warming drawers, electrical
outlet must not be in this
area.

Especificaciones del producto

Marca: GE
Categoría: horno
Modelo: JBP71CKCC

¿Necesitas ayuda?

Si necesitas ayuda con GE JBP71CKCC haz una pregunta a continuación y otros usuarios te responderán


horno GE Manuales

GE

GE JBS08PICWW Manual de Usario

18 Octubre 2024
GE

GE Profile JP939CHCC Manual de Usario

17 Octubre 2024
GE

GE JSP26BDWH Manual de Usario

17 Octubre 2024
GE

GE Profile JBP99SHSS Manual de Usario

17 Octubre 2024
GE

GE JB710WHWW Manual de Usario

15 Octubre 2024
GE

GE Adora JBP73HLBB Manual de Usario

14 Octubre 2024
GE

GE JB700SNSS Manual de Usario

14 Octubre 2024
GE

GE JGP330SEKSS Manual de Usario

14 Octubre 2024
GE

GE Profile Performance JS960TBWW Manual de Usario

11 Octubre 2024
GE

GE JBP62BMWH Manual de Usario

9 Octubre 2024

horno Manuales

Últimos horno Manuales

Continental Edison

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024
Taurus

Taurus HM778WHD Manual de Usario

27 Octubre 2024
Lacanche

Lacanche CITEAUX Manual de Usario

27 Octubre 2024
JennAir

JennAir JDS1450FS Manual de Usario

27 Octubre 2024
Orima

Orima ORP-76-IN Manual de Usario

27 Octubre 2024
Breville

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024
JennAir

JennAir JGRP436HL Manual de Usario

27 Octubre 2024
Neff

Neff C17MS22G1 Manual de Usario

27 Octubre 2024
Pit Boss

Pit Boss BK24 Manual de Usario

27 Octubre 2024
Guzzanti

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024