General Electric ZSC1202 Manual de Usario

Lee a continuación 📖 el manual en español para General Electric ZSC1202 (20 páginas) en la categoría horno. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
Installation
Instructions
Advantium®120V
Built-In SpeedCook
Ovens
PSB1200
PSB1201
ZSC1201
ZSC1202
For a Spanish version of this manual, visit our Website at ge.com.
Para consultar una version en español de este manual de instrucciones,
visite nuestro sitiode internet ge.com.
49-40593-1
MFL59060901
12-08 JR
Safety Information
2
CONTENTS
Design Information
Models Available......................................................................2
Product Dimensions and Clearances ............................3
Tools and Parts Required ....................................................3
Parts Supplied ..........................................................................3
Electrical Tools and Parts Required ................................3
Advance Planning ..................................................................3
Installation Preparation
Electrical Requirements........................................................4
Install Junction Box................................................................4
Preparing the Opening (Installation without
an accessory storage drawer)..................................5-8
Preparing the Opening (Installation with
an accessory storage drawer) ..............................9-12
Installation Under a 36Cooktop..................................12
Installation Instructions
Step 1, Remove Packaging and Parts ........................13
Step 2, Install Door Trim....................................................14
Step 3, Route Conduit ........................................................14
Step 4, Install Bottom Trim ..............................................15
Step 5, Install Mounting Screws ....................................15
Step 6, Finalize Installation ..............................................15
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT Save these instructions
for local inspector’s use.
IMPORTANT Observe all governing codes
and ordinances.
Note to Installer Be sure to leave these
instructions with the Consumer.
Note to Consumer Keep these instructions
with your Owner’s Manual for future reference.
Skill Level Installation of this appliance
requires basic mechanical and electrical skills.
Completion Time 1 Hour.
Proper installation is the responsibility
of the installer. Product failure due to improper
installation is not covered under the warranty.
See Owner’s Manual for warranty information.
NOTE: This oven is only approved to be installed
under the specific models as labeled on this unit.
IMPORTANT Use this oven only
for its intended purpose. Never use the oven
for warming or heating a room. Prolonged use
of the oven without proper ventilation can
be hazardous.
CAUTION:
For personal safety, remove house fuse or oven
circuit breaker before beginning installation
to avoid severe or fatal shock injury.
CAUTION:
For personal safety, the mounting surface
must be capable of supporting the cabinet load,
in addition to the added weight of the 80-pound
oven and 30-pound drawer, plus additional oven
loads of up to 50 pounds or a total weight of up
to 160 pounds.
CAUTION:
If installing the Advantium 120V Oven below 36,
you must use the bottom trim due to burnplastic
risk to children. The plastic trim acts as insulation
and will help prevent burns to children from hot
surfaces.
CAUTION:
If installing the Advantium 120V Oven below 36,
do not remove the plastic door trim due to burn
risk to children. The plastic trim acts as insulation
and will help prevent burns to children from hot
surfaces.
MODELS AVAILABLE
Profile Models:
PSB1200WWWhite*
PSB1200BBBlack
PSB1201SSStainless Steel
Monogram Models:
ZSC1201SSStainless Steel
ZSC1202SSStainless Steel**
*No color-matched drawer available for this model.
**This unit cannot be installed with an accessory
storage drawer.
Design Information
3
PRODUCT DIMENSIONS AND CLEARANCES NOTE: Appearance will vary by model.
19 1/32”
29 3/4”
TOOLS AND PARTS REQUIRED
(NOT SUPPLIED)
#2 Phillips screwdriver
Hand-held drill
High speed drill bit, 3/32diameter
3/8slot-head screwdriver
Level
Saw
2 x 4 or 2 x 2 lumber for installing runners
or 3/8plywood for floor (if required)
Wood screws or other hardware for installing
runner or shelf to support oven (if required)
Safety glasses or goggles
PARTS SUPPLIED
6 screws (3 required, 3 extra)
5 color-matched screws (4 required, 1 extra)
Bottom trim (2)
ADVANCE PLANNING
These ovens may be installed directly into a 30wide
oven cabinet.
Cutout dimensions are NOT the same for installation
with or without an accessory storage drawer.
Make sure to use the correct cutout when preparing
the opening.
NOTE: ZSC1202 models CANNOT be installed
with an accessory storage drawer. See Installation
Preparation Without an Accessory Storage Drawer
for this model.
Allow for clearance to adjacent corners, walls,
drawers, etc.
The oven must be securely installed in a cabinet
that is firmly attached to the house structure.
Weight on the oven door could cause the oven
to tip and result in injury. Never allow anyone
to climb, sit, stand or hang on the oven door.
If installing the drawer accessory, the drawer must
be assembled to the oven prior to installation into
the cabinet. See the Accessory Storage Drawer
Assembly Instructions.
21-1/2
13/16
13
19
29-3/4
1-1/8
5/8

Especificaciones del producto

Marca: General Electric
Categoría: horno
Modelo: ZSC1202

¿Necesitas ayuda?

Si necesitas ayuda con General Electric ZSC1202 haz una pregunta a continuación y otros usuarios te responderán




horno General Electric Manuales

horno Manuales

Últimos horno Manuales