Genexis Aura E650 Manual de Usario

Lee a continuación 📖 el manual en español para Genexis Aura E650 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Wi-Fi EasyMeshTM supported
Aura
E650
Installation Guide
Revision 1.2 - September 2023 - Copyright 2023 Genexis Netherlands B.V. All rights reserved. ©
Multiple languages of this document and additional product information are availableon hps://genexis.eu/product/aura/downloads
Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
Download app and
follow the steps
Scan QR-code
1
2
Geing started
Check if the following items are in
the giftbox:
Aura E650
Wall-mount bracket
Power adapter
Network cable
Plugs & screws
Labels (self-adhesive)
Label position
The product label is positioned on the boom of
the Genexis Aura device and additional labels
are included in the giftbox.
Genexis EasyWiFi app
Installation and management of the Genexis
Aura E650 device can be done with help of the
mobile application Genexis EasyWiFi. Please
follow the steps on the left page.
Placement
Aura supports two placement options;
standing (desktop) and wall-mounted. It is
recommended to place the deviceaway’
from obstacles and objects.
Standing
1. Place the device vertically on a at surface.
2. Store the wall-mount bracket in a safe place.
Warning: Do not cover the device with
anything, or put the device horizontally on a
at surface, because this will interfere with
the ventilation of the Aura E650.
Operation Temperature 0°C ~ 40°C
Installation guide
You're just a few steps away to install your
device via the Genexis EasyWiFi app
Installation with use of app
Seing up the Aura
1. Connect a network cable between your
broadband outlet and the Aura E650 WAN
port (red connector).
2. Connect the supplied power adapter
to the Aura and plug the adapter into a
power socket.
3. Flip the ON/OFF switch at the back of the
device to turn it on.
4. Wait until the Status LED stops blinking and
turns solid green.
Your Aura E650 is now ready for use.
Connecting your telephone
You can connect a regular plain telephone to
the Aura E650.
1. Insert a telephone cable of a regular wired
telephone in the telephone port
(green connector).
Wall-mount
1. Download and print the drilling guide from
hps://genexis.eu/product/aura/downloads
2. Use the drilling guide to drill the holes and
insert the plugs.
3. Screw the wall-mount bracket to the wall
with the provided screws.
Using the wall-mount bracket
Keep the device with the port side facing up or
down, as preferred. There are two options:
A Either, slide the device from top or boom
into the wall-mount bracket by placing a
side panel of the device into the wall-mount
placeholders, until it is halfway.
B Or alternatively, press the device in the wall-
mount bracket until it is locked and holds the
device (you need to apply a lile force to lock
the device in the bracket).
When removing the device from the wall-
mount bracket you can either slide out or need
to press the placeholders backwards to unlock
the outside panels of the device.
A
B

Especificaciones del producto

Marca: Genexis
Categoría: No categorizado
Modelo: Aura E650

¿Necesitas ayuda?

Si necesitas ayuda con Genexis Aura E650 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Genexis Manuales

No categorizado Manuales

Últimos No categorizado Manuales