Godox QS1200II Manual de Usario

Godox Lámpara QS1200II

Lee a continuación 📖 el manual en español para Godox QS1200II (6 páginas) en la categoría Lámpara. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Professional Studio Flash
专业影室闪光灯
705-QS2000-00 Made In China
地址/ 深圳市宝安区福永镇福洲大道西新和村华发工业园 栋Add: A4
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062) Fax: +86-755-25723423传真/
邮箱/E-mail: godox@godox.com
http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
说 明 手 册
Instruction Manual
中英文双语
Chinese English Bilingual
FOREWORD
Thanks for choosing QSII series studio flash. It is a durable and high-
performance strobe with complete functions to help professional
photographers create desired lighting effects. This product is suited for
wedding, advertisement, portrait, and fashion photography. The perfect light
source and a Must in studios and photo workshops! The QSII flash offers:
CONTENTS
15 Slave Trigger Model
15 Buzz Function
15 Key Combination
15 Alarm Display
15 Memory Function
16 Wireless Control Function
17 Tube Replacement
18 Technical Data
18 Maintenance
Bulilt-in Godox 2.4G wireless X system
Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in 0.1
increments.
High-qualified modeling lamp, 150W output and 5% to 100% manual light adjustment
Outstanding output stability, a tolerance of 2% under the same output
Anti-preflash function, enabling synchronization with cameras having a one-preflash
firing system
Adjusted parameters intelligently remembered after 3s and automatically recovered
after a restart
Wireless control of the flash power ratio, the on-and-off of modeling lamp and buzzer,
as well as flash triggering with Godox X1, XT16 or FT-16 flash trigger.
09 Foreword
10 Warning
10 Caution
11 Names of Parts
Body11
12 LCD Panel
12 Accessories
12 Separately Sold Accessories
13 Operations
13 Flash Preparation
13 Power Connection
13 Modeling Lamp
14 Power Output Control
14 Test Button
14 Sync Triggering
14 GR/CH Button
To prevent damage to the product or injury to you or to others, read the
following warnings in their entirety before using this product. Keep these
safety instructions where users can read them for ready reference.
Do not disassemble or modify. Should the product break down, send the
defective back to the authorized service center for inspection and maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of lighting
and heat dissipation holes are unobstructed. Do not use in flammable
environment.
As this product adopts make and break device, please keep it easy to be used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and
connecting accessories. When replacing the tube or modeling lamp, please
make sure that the tube is cool and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies), otherwise
it may lead to visual impairment.
Disconnect from the power supply when it will not be used for an extended
period.
CAUTION
After 30 continuous flashes at full power, the flash should be cooled down for
about 3 minutes. Overheating will occur if it is used continuously without cooling
down.
Do not keep using the modeling lamp for a long time; otherwise flammable
accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time
is recommended in this case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire too
frequently (not over six times for one minute). Overheating will result in damages
for strobe housing and/or studio light.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Warning
- 09 - - 10 -
Body
NAMES OF PARTS
1. AC Power Socket
2. Sync Cord Jack
3. Power Switch
4. Test Button
5. MOD/OFF Modeling Lamp Button
6. S1/S2 Slave Model Button
7. Group/Channel Button
8. BUZZ Button
9. Wireless Control Port
10. LCD Display
11. Light Sensor
12. Modeling Lamp Indicator
13. Test Indicator
14. Select Dial + SET Button
15. Fuse
16. Mounting Bracket
17. Umbrella Input
18. Direction Adjusting Handle
11
10
1
6
9
5
18
14
3
2
7
8
15
16
17
4
13
12
Separately sold accessories
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects: X1, XT16 or FT-16 remote
control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor,
Snoot, etc.
1. Built-in 2.4G Wireless Transmission
2. Built-in Wireless Channel
3. Built-in Wireless Channel Dial
4. Slave Model Indicator
5. Beep
6. Temperature Alarm Display
7. Built-in Wireless Group
8. Flash Output
9. Modeling Lamp is off
10.Modeling Lamp is in the PROP
mode
11.Modeling Lamp shows the power in
percentage
12.Modeling Lamp is off when
triggering the flash
LCD Panel
1. Power Cord
2. Standard Reflector
3. Lamp Cover
4. Glass Protection Cover
5. Modeling Lamp
6. Instruction Manual
Accessories
5
4
3
2
1
CH
S
%
OFF PROP
1
7
9
8
6
4
11
12
2
3
5
10
- 11 - - 12 -

Especificaciones del producto

Marca: Godox
Categoría: Lámpara
Modelo: QS1200II

¿Necesitas ayuda?

Si necesitas ayuda con Godox QS1200II haz una pregunta a continuación y otros usuarios te responderán




Lámpara Godox Manuales

Lámpara Manuales

Últimos Lámpara Manuales