Gys DHC 54 E Manual de Usario

Gys No categorizado DHC 54 E

Lee a continuación 📖 el manual en español para Gys DHC 54 E (11 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/11
SCM54E
SWITCHING POWER, DIGITAL PROCESSING
BATTERY BUS CHARGER/MAINTAINER
=================================================
Specification:
Charges------------------------ 12V SLI, AGM, Gel Batteries
Input-------------------------------------220~240VAC 2A 50HZ
Charging Output Mode--------------------------------5 AMPS
Maintenance Output Mode---------------------Pulse Charge
Leads-------------------------------------------------------183 CM
Size----------------------------------------35.0 X 19.0 X 7.5 CM
Weight------------------------------------------------------2.5KGS
- GB.1-V1 -
SCM54E SWITCHING POWER, DIGITAL PROCESSING
BATTERY CHARGER/MAINTAINER
IMPORTANT SAFETY INSTRUCTIONS
1.
SAVE THESE INSTRUCTIONS This manual contains important
safety and operating instructions for battery charger/maintainer
Model SCM54E.
2.
Use SCM54E only on 12 volts LEAD ACID, AGM and GELLED
ELECTROLYTE (GEL-CELL) batteries. Do not attempt to use on
other voltages and types of batteries (DRY CELL, NICKEL
CADMIUM, NICKEL METAL HYDRIDE, etc.) commonly found in
small home appliances. This may cause SCM54E and batteries to
burst, resulting in damage or injury to person and property.
SCM54E delivers up to 5 Amps.
3.
Do not expose SCM54E to direct sunlight, rain or snow.
4.
Do not use SCM54E on batteries that are in use or that are installed.
If necessary to remove batteries from the vehicle and take to a
properly installed SCM54E location.
5.
Do not use attachments with the SCM54E that are not recommended.
Non-recommended attachments may result in injury, electric shock,
or fire and voids the warranty.
6.
To reduce risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
7.
An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and
electric shock.
8.
Do not operate charger with damaged cord or plug replace the cord
or plug immediately.
9.
Do not operate charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified serviceman.
10.
Do not disassemble charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a
risk of electric shock or fire
11.
To prevent injury during cleaning or maintenance, disconnect all
batteries and move them to clear access to the unit. Unplug
SCM54E from the wall outlet. Use a slightly dampened cloth to
clean the housing and lead sets. Do not use solvents or soaps.
- GB.2-V1 -
12.
Place the power cords in a location where they will not be stepped on,
tripped over, or subjected to stress or abuse of any kind.
13.
For fuse replacement, contact distributors for replacement. Any
tampering or incorrect assembly may result in fire or electric shock
and voids the warranty.
14.
Never attempt to charge a frozen battery. Allow the battery to
return to room temperature before connection. Suggested operation
range is in ambient temperature.
15.
Never use SCM54E in or on any boat or watercraft. You must
remove the battery from the boat or watercraft and charge the battery
at the properly installed location of SCM54E unit.
16.
Do not install SCM54E where it will be exposed to moisture or
inclement weather, or around combustibles like trash, flammable
liquids and vapors.
WARNING -- RISK OF EXPLOSIVE GASES
1.
WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME
BEFORE USING YOUR SCM54E, YOU READ THIS MANUAL
AND FOLLOW THE INSTRUCTIONS EXACTLY.
2.
To reduce risk of battery explosion, follow these instructions and
those published by the battery manufacturer and manufacturer of any
equipment you intend to use in the vicinity of the battery. Observe
cautionary markings on these items.
PERSONAL SAFETY PRECAUTIONS
1.
Someone should be within range of your voice or close enough to
come to your aid when you work near a lead acid battery.
2.
Have plenty of fresh water and soap nearby in case battery acid
contacts skin, clothing or eyes.
3.
Wear complete eye protection and protective clothing.
4.
Avoid touching eyes while working near battery.
5.
If battery acid contacts skin or clothing, wash immediately with soap
- GB.3-V1 -

Especificaciones del producto

Marca: Gys
Categoría: No categorizado
Modelo: DHC 54 E

¿Necesitas ayuda?

Si necesitas ayuda con Gys DHC 54 E haz una pregunta a continuación y otros usuarios te responderán




No categorizado Gys Manuales

No categorizado Manuales

Últimos No categorizado Manuales