Harman Kardon AVR 1510 Manual de Usario

Lee a continuación 📖 el manual en español para Harman Kardon AVR 1510 (47 páginas) en la categoría receptor. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/47
®
Audio/video receiver
AVR 1510, AVR 151, AVR 151/230C
Owners Manual
AVR
Table of Contents
2
INTRODUCTION 3
SUPPLIED ACCESSORIES 3
IMPORTANT SAFETY INFORMATION 3
PLACE THE AVR 3
FRONT-PANEL CONTROLS 4
REAR-PANEL CONNECTORS 6
SYSTEM REMOTE CONTROL FUNCTIONS 8
INTRODUCTION TO HOME THEATER 10
TYPICAL HOME THEATER SYSTEM 10
MULTICHANNEL AUDIO 10
SURROUND MODES 10
PLACE YOUR SPEAKERS 10
PLACING THE LEFT, CENTER AND RIGHT SPEAKERS 10
PLACING THE SURROUND SPEAKERS 10
PLACING THE SUBWOOFER 10
TYPES OF HOME THEATER SYSTEM CONNECTIONS 11
SPEAKER CONNECTIONS 11
SUBWOOFER CONNECTIONS 11
SOURCE DEVICE CONNECTIONS 11
VIDEO CONNECTIONS 12
RADIO CONNECTIONS 12
NETWORK CONNECTOR 12
USB PORT 12
MAKING CONNECTIONS 13
CONNECT YOUR SPEAKERS 13
CONNECT YOUR SUBWOOFER 13
CONNECT YOUR TV OR VIDEO DISPLAY 14
CONNECT YOUR AUDIO AND VIDEO SOURCE DEVICES 15
USB AND IOS DEVICES 17
CONNECT TO YOUR HOME NETWORK 17
CONNECT THE RADIO ANTENNAS 17
CONNECT IR EQUIPMENT 17
CONNECT THE TRIGGER OUTPUT 18
CONNECT TO AC POWER 18
SET UP THE REMOTE CONTROL 19
INSTALL THE BATTERIES IN THE REMOTE CONTROL 19
PROGRAM THE REMOTE TO CONTROL YOUR SOURCE
DEVICES AND TV 19
SET UP THE AVR 20
TURN ON THE AVR 20
USING THE ON-SCREEN MENU SYSTEM 20
CONFIGURE THE AVR FOR YOUR SPEAKERS 20
SET UP YOUR SOURCES 22
SET UP THE NETWORK 23
OPERATING YOUR AVR 23
HARMAN REMOTE APP 23
CONTROLLING THE VOLUME 24
MUTING THE SOUND 24
LISTENING THROUGH HEADPHONES 24
SELECTING A SOURCE 24
SELECTING A SURROUND MODE 24
LISTENING TO FM AND AM RADIO 25
LISTENING TO MEDIA ON A USB DEVICE 25
LISTENING TO AN IPOD/IPHONE/IPAD DEVICE 26
LISTENING TO VTUNER (INTERNET RADIO) 26
LISTENING TO MEDIA VIA YOUR HOME NETWORK 26
ADVANCED FUNCTIONS 27
AUDIO PROCESSING AND SURROUND SOUND 27
SYSTEM SETTINGS 29
SLEEP TIMER 29
PROCESSOR RESET 29
TROUBLESHOOTING 30
SPECIFICATIONS 31
APPENDIX 32
ENGLISH
AVR Introduction, Supplied Accessories,
Important Safety Information and Place the AVR
3
Introduction
Thank you for choosing this Harman Kardon product!
For more than fifty years, the Harman Kardon mission has been to share a passion for music
and entertainment, using leading-edge technology to achieve premium performance.
Sidney Harman and Bernard Kardon invented the receiver, a single component designed
to simplify home entertainment without compromising performance. Over the years,
Harman Kardon products have become easier to use, while offering more features and
sounding better than ever.
The AVR 1510/AVR 151 5.1-channel digital audio/video receivers (AVRs) continue this
tradition with some of the most advanced audio and video processing capabilities yet,
and a wealth of listening and viewing options.
To obtain the maximum enjoyment from your new AVR, please read this manual and
refer back to it as you become more familiar with its features and their operation.
If you have any questions about this product, its installation or its operation, please
contact your Harman Kardon retailer or custom installer, or visit the Web site at
www.harmankardon.com.
Supplied Accessories
The following accessory items are supplied with your AVR. If any of these items are
missing, please contact your Harman Kardon dealer or Harman Kardon customer service
at www.harmankardon.com.
System remote controlŘ
AM loop antennaŘ
FM wire antennaŘ
Two AAA batteriesŘ
AC power cord (AVR 151 only)Ř
IMPORTANT SAFETY INFORMATION
Verify Line Voltage Before Use
The AVR 1510 has been designed for use with 120-volt alternating current (AC). The
AVR 151 has been designed for use with 220 240-volt AC. Connection to a line voltage
other than that for which your receiver is intended can create a safety and re hazard
and may damage the unit. If you have any questions about the voltage requirements for
your specific model, or about the line voltage in your area, contact your selling dealer
before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We do not
recommend that extension cords be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets, or place heavy objects on them. Damaged
power cords should be replaced immediately by an authorized service center with a cord
meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug; never
pull the cord. If you do not intend to use your AVR for any considerable length of time,
disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the cabinet may
present a shock hazard, and any modification to the product will void your warranty.
If water or any metal object such as a paper clip, wire or staple accidentally falls inside
the unit, disconnect it from the AC power source immediately, and consult an authorized
service center.
CATV or Antenna Grounding (AVR 1510)
If an outside antenna or cable system is connected to this product, be certain that it is
grounded so as to provide some protection against voltage surges and static charges.
Section 810 of the United States National Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes and
requirements of the grounding electrode.
NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (cable TV)
system installer’s attention to article 820-40 of the NEC, which provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as possible.
Place the AVR
Place the AVR on a rm and level surface. Be certain that the surface and any Ř
mounting hardware can support the AVR’s weight.
Provide proper space above and below the AVR for ventilation. Recommended Ř
clearance distances are 30cm above the unit, 30cm behind the unit and 30cm on
each side of the unit.
If you install the AVR in a cabinet or other enclosed area, provide cooling air within Ř
the cabinet. Under some circumstances, a fan may be required.
Do not obstruct the ventilation slots on the top of the AVR or place objects directly Ř
over them.
Do not place the AVR directly on a carpeted surface.Ř
Do not place the AVR in moist or humid locations, in extremely hot or cold locations, Ř
in areas near heaters or heat registers, or in direct sunlight.

Especificaciones del producto

Marca: Harman Kardon
Categoría: receptor
Modelo: AVR 1510

¿Necesitas ayuda?

Si necesitas ayuda con Harman Kardon AVR 1510 haz una pregunta a continuación y otros usuarios te responderán




receptor Harman Kardon Manuales

receptor Manuales

Últimos receptor Manuales