Harman Kardon AVR 460/230 Manual de Usario

Harman Kardon receptor AVR 460/230

Lee a continuación 📖 el manual en español para Harman Kardon AVR 460/230 (38 páginas) en la categoría receptor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/38
AVR 460
AVR 360
AUDIO/VIDEO RECEIVERS
OWNER’S MANUAL – Basic Functions
2
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with a dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the
7.
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or
8.
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
9.
A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at
10.
plugs, convenience receptacles and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
11.
12.
Use only with the cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long
13.
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when
14.
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Do not expose this apparatus to dripping or splashing and ensure that no
15.
objects filled with liquids, such as vases, are placed on the apparatus.
To completely disconnect this apparatus from the AC Mains, disconnect the
16.
power supply cord plug from the AC receptacle.
The mains plug of the power supply cord shall remain readily operable.
17.
Do not expose batteries to excessive heat such as sunshine, fire or the like.
18.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.
WARNING
: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
IMPORTANT SAFETY INFORMATION
Verify Line Voltage Before Use
Your AVR 460/AVR 360 has been designed for use with 230-240 volt AC
current. Connection to a line voltage other than that for which it is intended
can create a safety and fire hazard and may damage the unit.
If you have any questions about the voltage requirements for your specific
model, or about the line voltage in your area, contact your selling dealer
before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We
do not recommend that extension cords be used with this product. As with all
electrical devices, do not run power cords under rugs or carpets or place heavy
objects on them. Damaged power cords should be replaced immediately by
an authorized service center with a cord meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug;
never pull the cord. If you do not intend to use the unit for any considerable
length of time, disconnect the plug from the AC outlet.
DECLARATION OF CONFORMITY
We, Harman Consumer Group, Inc.
2, Route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described
in this owner’s manual is in compliance with technical
standards:
EN 60065:2002; A1EN 55013:2001; A1; A2
EN 55020:2007
EN 55022:2006 (Class B)
EN 61000-3-2:2006
EN 61000-3-3:1995; A1; A2
Jurjen Amsterdam
Harman Consumer Group, Inc.
07/09
3
ENGLISH
SAFETY INFORMATION
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the
cabinet may present a shock hazard, and any modification to the product will
void your warranty. If water or any metal object such as a paper clip, wire or
staple accidentally falls inside the unit, disconnect it from the AC power source
immediately, and consult an authorized service center.
Installation Location
To ensure proper operation and to avoid the potential for safety hazards, •
place the unit on a firm and level surface. When placing the unit on a shelf,
be certain that the shelf and any mounting hardware can support the
weight of the product.
Make certain that proper space is provided both above and below the •
unit for ventilation. If this product will be installed in a cabinet or other
enclosed area, make certain that there is sufficient air movement within
the cabinet. Under some circumstances, a fan may be required.
Do not place the unit directly on a carpeted surface. •
Avoid installation in extremely hot or cold locations, or in an area that is •
exposed to direct sunlight or heating equipment.
Avoid moist or humid locations. •
Do not obstruct the ventilation slots on the top of the unit, or place objects •
directly over them.
Due to the weight of the •AVR 460/AVR 360 and the heat generated by
the amplifiers, there is the remote possibility that the rubber padding
on the bottom of the unit’s feet may leave marks on certain wood or
veneer materials. Use caution when placing the unit on soft woods or
other materials that may be damaged by heat or heavy objects. Some
surface finishes may be particularly sensitive to absorbing such marks,
due to a variety of factors beyond our control, including the nature of the
finish, cleaning materials used, and normal heat and vibration caused by
the use of the product, or other factors. We recommend that caution be
exercised in choosing an installation location for the component and in
normal maintenance practices, as your warranty will not cover this type of
damage to furniture.
Cleaning
When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and
only after unplugging the AC power cord, wipe it with a soft cloth dampened
with mild soapy water, then a fresh cloth with clean water. Wipe it dry
immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner,
alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as
they may damage the finish of metal parts. Avoid spraying insecticide near
the unit.
Moving the Unit
Before moving the unit, be certain to disconnect any interconnection cords
with other components, and make certain that you disconnect the unit from
the AC outlet.
Unpacking
The carton and shipping materials used to protect your new receiver during
shipment were specially designed to cushion it from shock and vibration. We
suggest that you save the carton and packing materials for use in shipping if
you move, or should the unit ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it. This
is done by carefully slitting the tape seams on the bottom and collapsing the
carton. Other cardboard inserts may be stored in the same manner. Packing
materials that cannot be collapsed should be saved along with the carton in a
plastic bag.
If you do not wish to save the packaging materials, please note that the carton
and other sections of the shipping protection are recyclable. Please respect
the environment and discard those materials at a local recycling center.
It is important that you remove the protective plastic film from the front-
panel lens. Leaving the film in place will affect the performance of your
remote control.

Especificaciones del producto

Marca: Harman Kardon
Categoría: receptor
Modelo: AVR 460/230

¿Necesitas ayuda?

Si necesitas ayuda con Harman Kardon AVR 460/230 haz una pregunta a continuación y otros usuarios te responderán


receptor Harman Kardon Manuales

Harman Kardon

Harman Kardon AVR 300 Manual de Usario

2 Octubre 2024
Harman Kardon

Harman Kardon AVR AV Manual de Usario

3 Septiembre 2024
Harman Kardon

Harman Kardon AVR 1550 Manual de Usario

1 Septiembre 2024
Harman Kardon

Harman Kardon HK 3390 Manual de Usario

25 Agosto 2024
Harman Kardon

Harman Kardon AVR 3650 Manual de Usario

25 Agosto 2024
Harman Kardon

Harman Kardon AVR-156 Manual de Usario

24 Agosto 2024
Harman Kardon

Harman Kardon AVR 132 Manual de Usario

22 Agosto 2024
Harman Kardon

Harman Kardon PA5800 Manual de Usario

20 Agosto 2024
Harman Kardon

Harman Kardon AVR 230C Manual de Usario

19 Agosto 2024
Harman Kardon

Harman Kardon AVR 254 Manual de Usario

19 Agosto 2024

receptor Manuales

Últimos receptor Manuales

Crown

Crown CDi DriveCore 2|300BL Manual de Usario

27 Octubre 2024
Boss

Boss PT3000 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies PBM120AT Manual de Usario

27 Octubre 2024
Fosi Audio

Fosi Audio V3 Manual de Usario

26 Octubre 2024
Jensen

Jensen CAR710-4BC Manual de Usario

25 Octubre 2024
Onkyo

Onkyo TX-RZ830 Manual de Usario

24 Octubre 2024
Pioneer

Pioneer VSX-1122K Manual de Usario

22 Octubre 2024
Yamaha

Yamaha HTR-5072 Manual de Usario

21 Octubre 2024
NAD

NAD C 355BEE Manual de Usario

20 Octubre 2024
Yamaha

Yamaha RX-A810 Manual de Usario

20 Octubre 2024