Hartke LX8500 Manual de Usario

Hartke receptor LX8500

Lee a continuación 📖 el manual en español para Hartke LX8500 (12 páginas) en la categoría receptor. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Owner's Manual
2
Important Safety Information
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device
shall remain readily operable.
Protective earthing terminal. The apparatus should be connected to a mains socket outlet with
a protective earthing connection.
Voltage selector: Used to adjust the input rating (100-120Vac 50/60Hz and 220-240Vac
50/60Hz), please just insert the mains power plug into the socket-outlet with voltage within the
setting of the selector. The current ratings of mains fuse link are different for each input rating (see
marking for details), and the installed mains fuse link matches the input rating of the voltage selector
during factory assembly line production, please ask a qualified personnel to help you replace the
mains fuse link before you adjust the voltage selector.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference,and (2)this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance instructions in the
literature accompanying the appliance.
ATTENTION
RISQUE DE CHOC ÉLECTRONIQUE -
NE PAS OUVRIR
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway may
return their used electronic products free of charge to designated collection facilities or to
a retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human health.
LX Series Bass Amplifier 3
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightening storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Service is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled
with liquid such as vases shall be placed on the apparatus.
16. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert.
17. Please keep a good ventilation environment around the entire unit.
18. No naked flame sources, such as lighted candles, should be placed on the apparatus.
19. Do not install this equipment in a confined or building-in space such as a book case or similar
unit, and remain a well ventilation conditions at open site. The ventilation should not be
impeded by covering the ventilation openings with items such as newspaper, table-cloths,
curtains etc.
20. This apparatus is for professional use only.
21. The apparatus is intended to be used in moderate climates.
22. WARNING: For the terminals marked with symbol of “ ” may be of sufficient magnitude
to constitute a risk of electric shock. The external wiring connected to the terminals requires
installation by an instructed person or the used of ready-made leads or cords.
23. Class 2 wiring: To reduce the risk of electric shock, The external wiring connected to the
terminals marked with “class 2 wiring” requires installed with class 2 wiring by an instructed
person or the used of ready-made leads or cords.
Important Safety Information
Copyright 2020, v1.5.3

Especificaciones del producto

Marca: Hartke
Categoría: receptor
Modelo: LX8500
Peso.: 250 g
Ancho: 97 mm
Profundidad: 99 mm
Altura: 30 mm
Certificados de sostenibilidad: RoHS
Cantidad por paquete: 45 stuk(s)
Voltaje de entrada: 85 - 264 V
Potencia de salida: 75 W
Abarcando: 36 V

¿Necesitas ayuda?

Si necesitas ayuda con Hartke LX8500 haz una pregunta a continuación y otros usuarios te responderán




receptor Hartke Manuales

Hartke

Hartke GT100 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA5000 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA2000 Manual de Usario

16 Septiembre 2024
Hartke

Hartke GT60 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA3000 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA4000 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA7000 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA1400 Manual de Usario

16 Septiembre 2024
Hartke

Hartke HA5500c Manual de Usario

16 Septiembre 2024
Hartke

Hartke HATX300 Manual de Usario

15 Septiembre 2024

receptor Manuales

Últimos receptor Manuales