Havis C-DMM-3002 Manual de Usario

Havis No categorizado C-DMM-3002

Lee a continuación 📖 el manual en español para Havis C-DMM-3002 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
C-DMM-3002_INST_ - 12 19
INSTALLATION INSTRUCTIONS
C-DMM- Flip up Dash Monitor Mount 3002
2013 2019- Ford Police Interceptor Standard Interior and
Interceptor with Interior Upgrade Package (Ford opon code 65U)
TOOLS REQUIRED:
Ratchet Wrench Dash panel removal tool Open End Wrench - 7/16”
Socket Set Phillips screwdriver Torque wrench (in-lbs.)
Always!
Read all instrucons before installing any Havis, Inc. products.
Check for obstrucons (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
HARDWARE and PARTS:
QTY DESCRIPTION PART#
1 Main upper mounng bracket CM010241
1 Lower passenger side support bracket CM010239
3 -32 x 1/2" Machine screw GSM33118 10
3 #10 Flat washer GSM31003
3 #10 Split lock washer GSM31025
2 M6 x 25mm machine thread bolt GSM33712
1 VESA rotator plate CM009068
1 PVC washer CM008582
2 1/4" Plasc washer CM86600
4 1/4" Steel washer GSM31005
2 1/4" Nylock nut GSM30016
Notes:
The C-DMM-3000 swivel plate accepts C-MM-301 oset bracket used with C-MM-2XX adaptors.
C-MM-2XX series adaptor brackets are not needed for most VESA 75 and other Havis Docking Staon
mounng applicaons.
CM009068 VESA rotator plate gives addional posioning opons, but is not required depending on
mounng preference.
C-DMM-3002_INST_ - 12 19
C-DMM- 3002
Assembly
CM010241
Main upper mounng
bracket
CM009068
VESA rotator plate
CM86600 - 1/4" Plasc washer
GSM31005 - 1/4" Steel washer
GSM30016 - 1/4" Nylock nut
GSM33118 - -32 x 1/2" screw 10
GSM31025 - #10 Split lock washer
GSM33118 - -32 x 1/2" screw 10
GSM31025 - #10 Split lock washer
CM010239
Lower side support bracket
GSM33712 M6 x 1.0x25mm
GSM31005 1/4 ” Flat washer
C-DMM-3002_INST_ - 12 19
View of dash center instrument panel
Re-install lower dash trim.
Bracket should sck out as shown.
Aach lower side support bracket using
previously removed 7mm head fastener.
Remove the center dash top trim panel.
(8 mm socket)
On passenger side under vent, remove OEM 7mm
head fastener and slide lower side support
bracket between trim panel and dash.
Carefully remove (unsnap) lower/ center dash
panel

Especificaciones del producto

Marca: Havis
Categoría: No categorizado
Modelo: C-DMM-3002

¿Necesitas ayuda?

Si necesitas ayuda con Havis C-DMM-3002 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Havis Manuales

No categorizado Manuales

Últimos No categorizado Manuales