Havis DS-DELL-601-2 Manual de Usario

Lee a continuación 📖 el manual en español para Havis DS-DELL-601-2 (12 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Owner’s Manual
Havis Docking Station for
Dell Latitude Rugged 12 Tablet
www.havis.com
1-800-524-9900
DS-DELL-601
DS-DELL-601-2
DS-DELL-602
DS-DELL-602-2
DS-DELL-603
DS-DELL-603-2
DS-DELL-604
DS-DELL-604-2
DS-DELL-600 Series
Before Beginning (Original Instructions)
2
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-DELL-600 Series Docking Station for
Dell Latitude Rugged 12 Tablet
For questions regarding the set-up of your DS-DELL-600 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
DS-DELL-601
DS-DELL-601-2
DS-DELL-602
DS-DELL-602-2
DS-DELL-603
DS-DELL-603-2
DS-DELL-604
DS-DELL-604-2
This Owner’s Manual applies to the following Part Numbers:
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
(DS-DELL-602, DS-DELL-602-2) REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• FOR THE DS-DELL-601, DS-DELL-601-2, DS-DELL-602, DS-DELL-602-2 DOCKING STATIONS:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certied,
automotive grade, Dell approved 90W power source rated for a continuous, regulated
19.5VDC output (Havis Part Number LPS-131 or equivalent). Failure to comply with this
requirement will cause product damage that is NOT repairable and is NOT covered under warranty.
THE DS-DELL-604, DS-DELL-604-2 DOCKING STATIONS MUST BE USED WITH POWER CABLE
SHIPPPED WITH DOCKING STATION (PART # DS-DA-316). THIS CABLE INCLUDES A 15AMP
PROTECTION FUSE.
EC DECLARATION OF CONFORMITY in accordance with EN 50498
Manufacturers Name: Havis, Inc.
Manufacturers Address: 47099 Five Mile Road, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Dell Latitude Rugged 12 Tablet
Model: DS-DELL-60X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) -
2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
Supplementary Information:
The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8, and 6.9.
This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA August 13, 2015 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-DELL-60X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
Related Products
Do not place metal objects or containers of liquid on top of the Docking Station
If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
Use only the specied Power Supply (Part # LPS-131) with this Docking Station,
or Internal Power Supply cable (Part # DS-DA-316) with Internal Power Supply Docking Stations.
Do not store the Docking Station where water, moisture, steam, dust, etc. are present
Do not connect cables into ports other than what they are specied for
Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F)
for a long period of time
Precautions
Table of Contents
3
Specications
Parts Included
Port Replication Capability
Antenna Identication
Installation and Cable Management
Operation - Docking
Operation - Undocking
3
3
5
5
6
8
10
Specications
Power Supply Input 19.5V DC-In
Dimensions 14.1” ( 35.8 cm) H x 13.7” ( 34.8 cm ) W x 3.0” ( 7.6 cm ) D
Weight 4.88 lbs ( 2.21 kg )
Operating Environment 0° C to 50° C ( 32° F to 122°F )
Storage Environment -40° C to 85° C ( -40° F to 185° F )
This Hardware Kit includes:
1. Zip Ties (5)
2. Keys (2)
3. 1/4”-20 x 5/8” long
Button Head Screws (5)
4. 1/4”-20 x 3/8” long
Pan Head Screws (5)
Tools required for installation:
• #3 Phillips
(For attaching Mounting Bracket to Docking Station with Pan Head 1/4”-20 Screws)
• 5/32” Hex Drive
(For attaching Mounting Bracket to Motion Device with Button Head 1/4”-20 Screws)
Parts Included
Hardware Kit (HWK-0036)

Especificaciones del producto

Marca: Havis
Categoría: Base/estación de acoplamiento
Modelo: DS-DELL-601-2

¿Necesitas ayuda?

Si necesitas ayuda con Havis DS-DELL-601-2 haz una pregunta a continuación y otros usuarios te responderán




Base/estación de acoplamiento Havis Manuales

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales