Havis DS-PAN-712 Manual de Usario

Lee a continuación 📖 el manual en español para Havis DS-PAN-712 (12 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Owner’s Manual
Havis Docking Station
For Panasonic Toughpad FZ-G1
www.havis.com
1-800-524-9900
DS-PAN-711
DS-PAN-711-2
DS-PAN-712
DS-PAN-712-2
DS-PAN-713
DS-PAN-710 Series
DS-PAN-711
DS-PAN-711-2
DS-PAN-712
DS-PAN-712-2
DS-PAN-713
Before Beginning (Original Instructions)
2
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-PAN-710 Series Docking Station for
the Panasonic Toughpad FZ-G1.
For questions regarding the set-up of your DS-PAN-710 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR
UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES
CAN CAUSE PERMANENT DAMAGE.
• FOR THE DS-PAN-711, DS-PAN-711-2, DS-PAN-712 & DS-PAN-712-2 DOCKING STATIONS:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires
a certied, automotive grade, Panasonic approved 90W power source rated for a
continuous, regulated 16VDC output (Havis Part Number LPS-114 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.
• FOR THE DS-PAN-713 DOCKING STATION:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Panasonic FZ-G1 tablet
requires a certied, Panasonic approved power source rated for a continuous, regulated
16VDC output. Panasonic recommends using the power adapter included with the tablet;
failure to comply with this requirement will cause product damage that is NOT repairable
and is NOT covered under warranty.
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
(DS-PAN-712, DS-PAN-712-2), REFER TO THE SUPPLIED LIND POWER SUPPLY
REFERENCE GUIDE.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 50°C (32°F to 120°F).
PLEASE REFER TO PANASONIC TOUGHPAD FZ-G1 OWNER’S MANUAL FOR
MORE INFORMATION.
Related Products
www.havis.com • 1-800-524-9900
Table of Contents
3
Specications
Port Replication Capability
Parts Included
Installation & Cable Management
Operation - Docking
Operation - Undocking
3
4
4
6
8
10
Do not place metal objects or containers of liquid on top of the Docking Station
If a malfunction occurs, immediately unplug the Power Supply and remove the tablet
Use only the specied Power Supply with this Docking Station(Part # LPS-114)
Do not store the Docking Station where water, moisture, steam, dust, etc. are present
Do not connect cables into ports other than what they are specied for
Do not leave the Docking Station in a high temperature environment (greater than 8C, 185°F)
for a long period of time
Precautions
EC DECLARATION OF CONFORMITY in accordance with EN 50498
Manufacturers Name: Havis, Inc.
Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Panasonic Toughpad FZ-G1 tablets
Model: DS-PAN-71X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) -
2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
Supplementary Information:
The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8,
and 6.9. This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA September 21, 2016 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-PAN-71X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
Specications
Power Supply Input 16.0 V DC-In
Dimensions 8.98” ( 22.82 cm) H x 11.13” ( 28.26 cm ) W x 2.88” ( 7.32 cm ) D
Weight 4.0 lbs ( 1.8 kg )
Operating Environment -10° C to 50° C ( 14° F to 122°F )
Storage Environment -40° C to 85° C ( -40° F to 185° F )

Especificaciones del producto

Marca: Havis
Categoría: Base/estación de acoplamiento
Modelo: DS-PAN-712

¿Necesitas ayuda?

Si necesitas ayuda con Havis DS-PAN-712 haz una pregunta a continuación y otros usuarios te responderán




Base/estación de acoplamiento Havis Manuales

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales