Heatmiser DS1-E Manual de Usario
Heatmiser
Thermostaat
DS1-E
Lee a continuación 📖 el manual en español para Heatmiser DS1-E (4 páginas) en la categoría Thermostaat. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Wiring Diagram
RCD
MAINS SUPPLY
L N
MATTING OR WIRE
FlOOR PROBE
DS1-E
The Heatmiser DS1-E dial type thermostat is designed
specically for electric underoor heating.
This thermostat incorporates the following functions;
• Adjustable Switching Dierential
• LED Heat and Power Indication
• 230v AC, 13A Switching
Want More Information?
Call our support team on:
+44 (0)1254 669090
Or view video specications
directly on our website:
www.heatmiser.com
Introduction 1
4
Model: DS1-E
IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE
HEATING SYSTEM.
This dial thermostat is designed to be surface mounted.
1. Separate the front part of the thermostat by unscrewing securing screws on the
bottom face of the thermostat.
2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at
the marked positions and insert a wall plug in to each hole.
3. Terminate the thermostat as per wiring diagram and screw the DS1-E back plate to the
back box.
4. Reconnect the thermostat front plate and insert the securing screws.
Installation
PDF FAQ
2
3
To change the set point, rotate the dial until it points at the desired temperature.
Setting The Temperature
The Heatmiser DS1-E oers 1, 2 and 3°C switching dierential.
With a 1°C switching dierential the heating will switch on 1°C below the set
temperature and will turn o when the set temperature is reached.
A 2°C will turn the heating on 2°C below the set temperature.
3°C will switch the heating on 3°C below the set temperature.
To set the dierential, set the DIP switches according to the table below.
This setting is only required when the sensor option is set to Air and Floor mode.
The setting is used to protect the oor surface from overheating.
The oor temperature limit can be set to 20, 28 or 40°C.
To set the required oor limit temperature, set the DIP switches according to the table.
Should the oor temperature be achieved (even if the desired room temperature has
not) the heating will turn o. The Heat Active LED will ash in this case.
The thermostat has three modes of operation. Select the desired mode,
and set the DIP switches according to the table.
The DIP switches can be accessed from the back of thermostat.
Air Sensor: Uses the built in air sensor only.
Air Sensor & Floor Limiting Sensor: Uses the built in air sensor but also uses the
remote oor sensor to ensure the oor temperature doesn’t overheat.
Floor Sensor: Uses the remote oor sensor only.
Switching DierentialFloor Temperature Limit
Sensor Option
1 °C Switching
2 °C Switching
3 °C Switching
20°C
28°C
40°C
Air Sensor
Air & Floor
Floor Sensor
1
2
3
1
2
3
1
2
3
Switch 1 & 2 OFF
Switch 1 ON and Switch 2 OFF
Switch 1 OFF and Switch 2 ON
Switch 5 & 6 OFF
Switch 5 ON and Switch 6 OFF
Switch 5 OFF and Switch 6 ON
Switch 3 & 4 OFF
Switch 3 ON and Switch 4 OFF
Switch 3 OFF and Switch 4 ON
22
2
33
3
11
1
Especificaciones del producto
| Marca: | Heatmiser |
| Categoría: | Thermostaat |
| Modelo: | DS1-E |
¿Necesitas ayuda?
Si necesitas ayuda con Heatmiser DS1-E haz una pregunta a continuación y otros usuarios te responderán
Thermostaat Heatmiser Manuales
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
Thermostaat Manuales
- Thermostaat ATAG
- Thermostaat Bosch
- Thermostaat AEG
- Thermostaat Panasonic
- Thermostaat Honeywell
- Thermostaat Junkers
- Thermostaat Nefit
- Thermostaat Remeha
- Thermostaat Siemens
- Thermostaat Vaillant
- Thermostaat Amfra
- Thermostaat Google
- Thermostaat Itho
- Thermostaat De Dietrich
- Thermostaat EMOS
- Thermostaat Truma
- Thermostaat Intergas
- Thermostaat Schneider
- Thermostaat Theben
- Thermostaat Elektrobock
- Thermostaat Devi
- Thermostaat Stiebel Eltron
- Thermostaat Buderus
- Thermostaat Dimplex
- Thermostaat Vemer
- Thermostaat Profile
- Thermostaat Magnum
- Thermostaat Salus
- Thermostaat Tylö
- Thermostaat Somfy
- Thermostaat Grohe
- Thermostaat Oventrop
- Thermostaat King
- Thermostaat Technoline
- Thermostaat Devolo
- Thermostaat Arnold Rak
- Thermostaat Viessmann
- Thermostaat Nest
- Thermostaat Itho-Daalderop
- Thermostaat Hive
- Thermostaat Danfoss
- Thermostaat Saunier Duval
- Thermostaat Netatmo
- Thermostaat Seitron
- Thermostaat Sygonix
- Thermostaat Tado
- Thermostaat Hunter
- Thermostaat Busch-Jaeger
- Thermostaat Bulex
- Thermostaat AWB
- Thermostaat Finder
- Thermostaat Xavax
- Thermostaat Fantini Cosmi
- Thermostaat Delta Dore
- Thermostaat Orbis
- Thermostaat EBERLE
- Thermostaat Grasslin
- Thermostaat Gira
- Thermostaat Jung
- Thermostaat Wolf
- Thermostaat HQ
- Thermostaat Max
- Thermostaat Frico
- Thermostaat Radson
- Thermostaat Baxi
- Thermostaat EQ3
- Thermostaat Homematic IP
- Thermostaat REMKO
- Thermostaat ICY
- Thermostaat Computherm
- Thermostaat Avidsen
- Thermostaat Crestron
- Thermostaat ORNO
- Thermostaat Berker
- Thermostaat Drayton
- Thermostaat Heatit
- Thermostaat Watts
- Thermostaat Etherma
- Thermostaat Eurotronic
- Thermostaat Oregon Scientific
- Thermostaat Muller
- Thermostaat Econo-Heat
- Thermostaat PECO
- Thermostaat H-Tronic
- Thermostaat Intertechno
- Thermostaat EQ-3
- Thermostaat Tru Components
- Thermostaat Easy Timer
- Thermostaat Maico
- Thermostaat HomePilot
- Thermostaat THERMAFLEX
- Thermostaat Johnson Control
- Thermostaat Drayton Erie
- Thermostaat Qubino
- Thermostaat STI
- Thermostaat Rose LM
- Thermostaat Otio
- Thermostaat Enda
- Thermostaat GENERAL Life
- Thermostaat Oreg
Últimos Thermostaat Manuales
30 Septiembre 2024
30 Septiembre 2024
30 Septiembre 2024
29 Septiembre 2024
29 Septiembre 2024
28 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024