Hikoki PDA-125M Manual de Usario

Hikoki Máquina de molienda PDA-125M

Lee a continuación 📖 el manual en español para Hikoki PDA-125M (9 páginas) en la categoría Máquina de molienda. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/9
Disc Grinder
PDA-125M
Handling instructions
Read through carefully and understand these instructions before use.
2
1 2
15°~30°
A B
3
Wrench
Wheel nut
Depressed
center wheel
Wheel washer
Spindle
Notched part
Tighten
Convex side
Wheel guard
Push button
4Wrench
Tighten
Convex side
Sanding disc
Rubber pad
Push button
Washer nut
Spindle
5
Tighten
Push button
Wrench
Wheel nut
Diamond wheel
Wheel washer
Spindle
6
Wheel guard for
cutting wheel
Push button
Wrench
Wheel nut
Cutting wheel
Wheel washer
Spindle
7
21
5mm
12mm
Wear limit
No. of carbon brush
3
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your fi nger on the switch or
energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may aff ect the power
tool s operation.ʼ
If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations diff erent from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.

Especificaciones del producto

Marca: Hikoki
Categoría: Máquina de molienda
Modelo: PDA-125M

¿Necesitas ayuda?

Si necesitas ayuda con Hikoki PDA-125M haz una pregunta a continuación y otros usuarios te responderán


Máquina de molienda Hikoki Manuales

Hikoki

Hikoki GP2S2 Manual de Usario

15 Octubre 2024
Hikoki

Hikoki G 13VA Manual de Usario

30 Septiembre 2024
Hikoki

Hikoki G1210DA Manual de Usario

17 Septiembre 2024
Hikoki

Hikoki G13SS2 Manual de Usario

9 Septiembre 2024
Hikoki

Hikoki G13SR4 Manual de Usario

6 Septiembre 2024
Hikoki

Hikoki G23MR Manual de Usario

6 Septiembre 2024
Hikoki

Hikoki G 3618DA Manual de Usario

6 Septiembre 2024
Hikoki

Hikoki G23UDY2 Manual de Usario

4 Septiembre 2024
Hikoki

Hikoki G13BYEQ Manual de Usario

4 Septiembre 2024
Hikoki

Hikoki G13SW Manual de Usario

4 Septiembre 2024

Máquina de molienda Manuales

Últimos Máquina de molienda Manuales

Tryton

Tryton TDS125B Manual de Usario

26 Octubre 2024
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual de Usario

26 Octubre 2024
Bosch

Bosch GWS 18-150 PL Professional Manual de Usario

23 Octubre 2024
Parkside

Parkside PEXS 270 A1 Manual de Usario

17 Octubre 2024
Parkside

Parkside PWS 1010 Manual de Usario

17 Octubre 2024
Makita

Makita GA9060R Manual de Usario

14 Octubre 2024
Hitachi

Hitachi G 13SR Manual de Usario

14 Octubre 2024
Makita

Makita DGA700Z Manual de Usario

13 Octubre 2024
Milwaukee

Milwaukee 2781-21 Manual de Usario

8 Octubre 2024
Metabo

Metabo WP820-115 Manual de Usario

8 Octubre 2024