Hikvision DS-2CE16C0T-IT5 Manual de Usario

Hikvision Cámara de vigilancia DS-2CE16C0T-IT5

Lee a continuación 📖 el manual en español para Hikvision DS-2CE16C0T-IT5 (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

TVI Bullet&Turret Camera

User Manual

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

0200011051130

1.2 Overview

U D.6 L0 201D 2132 A01

Please refer to the product specification for

camera parameters and functions. 1.2.1 Overview of Type I Camera

1.2.2 Overview of Type Camera

HD Video Cable

Power Cable

Enclosure

Camera

HD Video Cable

Power Cable

Mounting Base

TURBO HD

Type

Type I

Type II

Model

DS-2CE16C0T-ITX

DS-2CE16D0T-ITX

DS-2CE56C0T-ITX

- -DS 2CE56D0T ITX

Sun Shield

Mounting Base

Lens

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the F CC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l Support auto white balance;

l Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "C E" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/E U.

Surveillance laws vary by jurisdiction. Check all

relevant laws in your jurisdiction before using

this product for surveillance purposes to ensure

that your use of this product conforms.

Privacy Notice

Figure 1-1 Overview of Type I Camera

Figure 1-2 Overview of Type II Camera

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NM B-3(A)

standards requirements.

In the model list, “X” indicates single or multiple

letters. For example, DS-2CE56C0T-IR X can be

DS-2C E56C0T-I RMM.

2.1 Installation of Type CameraI

Steps:

1.Drill the screw holes in the ceiling according

to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

Figure 2-1 Drill Template

All Screw Holes: for

mounting base

3.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

4.Fix the camera to the ceiling with the supplied

screws.

Figure 2-2 Fix the Camera to the Ceiling

5.Adjust the surveillance angle.

1).Loosen No.3 adjusting screw to adjust the

panning position 0 ~ 360 .( ° ° )

.2).Tighten No.3 adjusting screw

3).Loosen the No.2 adjusting screw to adjust the

tilting position 0 ~ 180( ° ° ).

4).Tighten No.2 adjusting screw.

5).Loosen No.1 adjusting screw to adjust the

azimuth angle of the image 0 ~ 360( ° ° ).

.6).Tighten No.1 adjusting screw

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.2 Installation of Type II Camera

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Figure 2-4 The Drill Template

Figure 2-5 Fix the Mounting Base and Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables to the cable hole and connect

corresponding power cable and video cable.

4.Secure the camera to the mounting base.

Adjust the camera according to the figure below

to get an optimum angle.

0 to 360° °

0 to 75° °

0 to 360° °

Figure 2-6 3-axis Adjustment

Screw Hole

Cable Hole

Figure 2-3 3-axis Adjustment

0 to 360° °

0 to 180° °

0 to 360° °

P Direction

T Direction

R Direction

P Direction

T Direction

R Direction

Especificaciones del producto

Marca:	Hikvision
Categoría:	Cámara de vigilancia
Modelo:	DS-2CE16C0T-IT5
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Touch
Color del producto:	Wit
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Peso.:	70900 g
Ancho:	559 mm
Profundidad:	550 mm
Altura:	1770 mm
Longitud del cable:	2.2 m
Nivel de ruido:	33 dB
Clase-de-eficiencia-energética:	D
Consumo-anual-de-energía:	190 kWu
Capacidad neta del congelador:	213 l
Capacidad de congelación:	12 kg/24u
Iluminación interior:	Ja
Dirección de apertura de puerta intercambiable.:	Ja
tipo-de-lámpara:	LED
Tiempo de retención en caso de corte de energía:	9 uur
Número de estantes del congelador:	8
numero de estrellas:	4*
Alarma de temperatura:	Ja
Sin sistema Frost:	Ja
Ancho del compartimento de instalación:	570 mm
Profundidad del compartimento de instalación:	550 mm
Alarma de puerta abierta:	Ja
Uso de energía por día:	0.52 kWh/24u
Actual:	10 A
Altura del compartimento de instalación (mín.):	1772 mm
Clase-climática:	SN-T
Clase de emisión de ruido:	B
Ubicación de la exhibición:	Binnenin
Con cerradura:	Ja
Función SuperFrost:	Ja
Altura del compartimento de instalación (máx.):	1788 mm
Certificados de sostenibilidad:	CE
Aplicaciones de control compatibles:	Miele@home
Detector de fallo de alimentación:	Ja
Cumplimiento de la sostenibilidad:	Ja
Wifi.:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Tipo-producto:	Vrieskast
Escala de eficiencia energética:	A tot G
Porta cubitos de hielo:	Ja
Tecnologías Miele (almacenamiento de alimentos):	SoftClose, SuperFrost, Sabbath mode, Party mode, NoFrost