Hikvision DS-2CE56H0T-IT3E Manual de Usario

Hikvision Cámara de vigilancia DS-2CE56H0T-IT3E

Lee a continuación 📖 el manual en español para Hikvision DS-2CE56H0T-IT3E (16 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
TURBO HD
H0T Series Turret & Dome
Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CE56 T-IT1EH0
DS-2CE56 T-IT3EH0
Type II
Camera
DS-2CE56 T-ITMEH0
Type III
Camera
DS-2CE56H0T-VPITE
This manual may contain technical incorrect places or
prinng errors, and the content is subject to change
without noce. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
0100001080321
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucon
manual, may cause harmful interference to radio
communicaons. Operaon of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European standards
listed under the Low Voltage Direcve 20 /35/EU, the 14
EMC Direcve 2014/30/EU.
2012/19 U (WEEE direcve): Products /E
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecon
points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery
to your supplier or to a designated collecon point. For
more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
Safety Instrucon
These instrucons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauon measure is divided into “Warnings” and
“Cauons”.
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cauons: Injury or equipment damage may occur if any
of the cauons are neglected.
Warnings
In the use of the device, you must be in strict
compliance with the electrical safety regulaons of the
naon and region.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950-1 standard. Refer to
technical specicaons for detailed informaon.
Do not connect mulple devices to one power adapter
to avoid over-heang or a re hazard caused by
overload.
Make sure that the plug is rmly connected to the
power socket.
Make sure that the device is rmly xed if wall
mounng or ceiling mounng is adopted.
If smoke, odor or noise rise from the device, turn o
the power at once and unplug the power cord, and
then contact the service center.
Never aempt to disassemble the camera by
unprofessional personal.
Cauons
Do not drop the camera or subject it to physical shock.
Do not place the camera in extremely hot, cold (the
operang temperature shall be - °C to 60°C), dusty or 40
damp locaons and do not expose it to high ,
electromagnetic radiation.
Do not touch senor modules with ngers.
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
Do not aim the camera at the sun or extra bright places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnec
radiaon or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulaon, good venlaon is
required for the operang environment.
Keep the camera away from liquid while in use for non-
water-proof device.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauons Follow these
precauons to prevent
potenal injury or
material damage.

Especificaciones del producto

Marca: Hikvision
Categoría: Cámara de vigilancia
Modelo: DS-2CE56H0T-IT3E

¿Necesitas ayuda?

Si necesitas ayuda con Hikvision DS-2CE56H0T-IT3E haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia Hikvision Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales