Hikvision DS-2CE72KF3T-L Manual de Usario

Hikvision Cámara de vigilancia DS-2CE72KF3T-L

Lee a continuación 📖 el manual en español para Hikvision DS-2CE72KF3T-L (23 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/23
3K ColorVu
Bullet & Turret Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CE12KF3T-LE
DS-2CE12KF3T-L
Type CameraII
DS-2CE10KF3T-LE
DS-2CE10KF3T-L
Type III Camera
DS-2CE72KF3T-LE
DS-2CE72KF3T-L
This manual may contain several technical mistakes or
prinng errors, and the content is subject to change
without noce. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
02010020221227
Iniaves on the Use of Video Products
Thank you for choosing Hikvision products.
Technology aects every aspect of our life. As a high-tech
company, we are increasingly aware of the role
technology plays in improving business efciency and
quality of life, but at the same me, the potenal harm of
its improper usage. For example, video products are
capable of recording real, complete and clear images. This
provides a high value in retrospect and preserving real-
me facts. However, it may also result in the infringement
of a third party’s legitimate rights and interests if
improper distribuon, use and/or processing of video data
takes place. With the philosophy of “Technology for the
Good”, Hikvision requests that every end user of video
technology and video products shall comply with all the
applicable laws and regulaons, as well as ethical
customs, aiming to jointly create a beer community.
Please read the following initiaves carefully:
1. Everyone has a reasonable expectaon of privacy,
and the installation of video products should not be
in conict with this reasonable expectation.
Therefore, a warning noce shall be given in a
reasonable and eecve manner and clarify the
monitoring range, when installing video products in
public areas. For non-public areas, a third party’s
rights and interests shall be evaluated when
installing video products, including but not limited
to, installing video products only aer obtaining the
consent of the stakeholders, and not installing
highly-invisible video products.
2. The purpose of video products is to record real
acvies within a specic me and space and under
specic condions. Therefore, every user shall rst
reasonably dene his/her own rights in such specic
scope, in order to avoid infringing on a third party’s
portraits, privacy or other legimate rights.
3. During the use of video products, video image data
derived from real scenes will connue to be
generated, including a large amount of biological
data (such as facial images), and the data could be
further applied or reprocessed. Video products
themselves could not disnguish good from bad
regarding how to use the data based solely on the
images captured by the video products. The result of
data usage depends on the method and purpose of
use of the data controllers. Therefore, data
controllers shall not only comply with all the
applicable laws and regulations and other normave
requirements, but also respect internaonal norms,
social morality, good morals, common pracces and
other non-mandatory requirements, and respect
individual privacy, portrait and other rights and
interests.
4. The rights, values and other demands of various
stakeholders should always be considered when
processing video data that is connuously generated
by video products. In this regard, product security
and data security are extremely crucial. Therefore,
every end user and data controller, shall undertake
all reasonable and necessary measures to ensure
data security and avoid data leakage, improper
disclosure and improper use, including but not
limited to, seng up access control, selecng a
suitable network environment (the Internet or
Intranet) where video products are connected,
establishing and constantly opmizing network
security.
Video products have made great contribuons to the
improvement of social security around the world, and we
believe that these products will also play an acve role in
more aspects of social life. Any abuse of video products in
violaon of human rights or leading to criminal acvies
are contrary to the original intent of technological
innovaon and product development. Therefore, each
user shall establish an evaluaon and tracking mechanism
of their product applicaon to ensure that every product
is used in a proper and reasonable manner and with good
faith.
© 2023 Hangzhou Hikvision Digital Technology Co., Ltd.
All rights reserved.
About this Manual
The Manual includes instrucons for using and managing
the Product. Pictures, charts, images and all other
informaon hereinaer are for descripon and
explanaon only. The informaon contained in the
Manual is subject to change, without noce, due to
rmware updates or other reasons. Please find the latest
version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance
of professionals trained in supporng the Product.
Trademarks
and other Hikvision’s trademarks and
logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes
of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS AND “WITH ALL FAULTS AND ERRORS ” ”.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO
YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER
BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION
SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH
ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER
THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL
NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT
OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO
ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-
CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Informaon
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European standards
listed under the General Product Safety Directive
2001/95/EC, the EMC Direcve 201 30/EU, the RoHS 4/
Direcve 2011/65/EU.
20 2/1 19/EU (WEEE directive): Products
marked with this symbol cannot be disposed
of as unsorted municipal waste in the
European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecon
points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The battery is
marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more
informaon, see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
Warning
This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instrucon
These instrucons are intended to ensure that user can
use the product correctly to avoid danger or property loss.
The precauon measure is divided into “Warnings” and
“Cauons”.
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cauons: Injury or equipment damage may occur if any of
the cauons are neglected.
Warnings
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauons Follow these
precauons to prevent
potenal injury or
material damage.
In the use of the product, you must be in strict
compliance with the electrical safety regulaons of the
naon and region.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12 VDC
according to the IEC60950-1 IEC62368-1 standard. and
Refer to technical specications for detailed
informaon.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
An all-pole mains switch shall be incorporated in the
electrical installaon of the building.
Do not connect mulple devices to one power adapter
to avoid over-heang or a re hazard caused by
overload.
Make sure that the plug is rmly connected to the
power socket.
If smoke, odor or noise rise from the device, turn off the
power at once and unplug the power cord, and then
contact the service center.
Never aempt to disassemble the camera by
unprofessional personal.
Cauons
CAUTION: Hot parts! Burned ngers when handling the
parts. Wait one-half hour aer switching off before
handling parts. This scker is to indicate that
the marked item can be hot and should not
be touched without taking care. For device
with this scker, this device is intended for installaon
in a restricted access locaon, access can only be gained
by service persons or by users who have been
instructed about the reasons for the restricons applied
to the location and about any precauons that shall be
taken.
The equipment shall not be exposed to dripping or
splashing and that no objects lled with liquids, such as
vases, shall be placed on the equipment.
Shock hazard! Disconnect all power sources before
maintenance.
No naked ame sources, such as lighted candles, should
be placed on the equipment.
Install the equipment according to the instrucons in
this manual.
To prevent injury, this equipment must be securely
attached to the oor/wall in accordance with the
installaon instrucons.
Do not drop the camera or subject it to physical shock.
Do not touch senor modules with ngers.
Do not place the camera in extremely hot, cold (the
operang temperature shall be -40°C to 60°C), dusty or
damp locaons, and do not expose it to high
electromagnetic radiation.
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
Do not aim the camera at the sun or extra bright places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnec
radiaon or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulaon, good venlation is required
for the operang environment.
Keep the camera away from liquid while in use for non-
water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Use Hikvision DVR that supports the power over coaxial
(PoC) technology if you power the device over coaxial
cable.
1
1 Introducon
1.1 Product Features
The main features are as follows:
High quality imaging with 3K resolution
High performance CMOS sensor
OSD menu with congurable parameters
24-hour color image
Smart light
3-axis adjustment
3D Digital Noise Reducon
1.2 Overview
1.2.1 Overview of Type I Camera
Power Cord
Video Cable
Bracket
Main Body
Lens
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type Camera II
Figure 1-2 Overview of Type II Camera
1.2.3 Overview of Type III Camera
Video Cable
Power Cord
Base
Installaon
Plate
Enclosure
Main Body
Figure 1-3 Overview of Type III Camera
2 Installaon
Before you start
Make sure that the device in the package is in good
condion and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installaon.
Check the specificaon of the products for the
installaon environment.
Check whether the power supply is matched with your
power output to avoid damage.
Make sure the wall is strong enough to withstand three
mes the weight of the camera and the mount.
If the product does not funcon properly, contact your
dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
3
Ceiling mounng and wall mounng are similar. Following
steps take ceiling mounng as an example.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Screw
Hole Screw
Hole
Screw
Hole
templat e
Cable
Hole
Figure 2-4 Drill Template
3. (Oponal) Drill the cable hole, when the cables are
routed through the ceiling.
4. Route and connect the power cord and video cable.
5. Align the screw holes in the bracket to the ceiling, and
secure the camera with three PA4 × 25 screws
(supplied).
Figure 2-5 Secure Camera to Ceiling
6. Power on the camera to check whether the image on
the live view is captured from the opmum angle. If
not, turn the trim ring counterclockwise to loosen it
and adjust the positions according to the figure below.
Rotaon Position
[0° to 360°] Tilt Position
[0° to °]90
Pan Posion
[0° to 360°]
Trim Ring
Figure 2-6 3-Axis Adjustment
7. Turn the trim ring clockwise to lock the posions.
2.1.3 Ceiling/Wall Mounng with Juncon Box
Before you start:
You need to purchase a juncon box in advance.
Ceiling mounng and wall mounng are similar.
Following steps take wall mounng as an example.
Type I camera wall mounng and type II camera wall
mounng are similar. Following steps take type I
camera wall mounng as an example.
Steps:
1. Paste the drill template for juncon box to the place
where you want to install the camera.
2. (Oponal) For cement wall, drill the screw holes with
a 5.5 mm drill and insert the supplied wall plugs.
4
Figure 2-7 Drill Template for Juncon Box
3. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the juncon box.
5. Align the screw holes of the camera with those on the
juncon box cover. Aach the camera to the juncon
box cover with three PM4 screws. × 10
Figure 2-8 Attach Camera to Juncon Box Cover
6. Secure the juncon box body on the wall with three
PA4 × screws (supplied).25
Figure 2-9 Secure Juncon Box on Wall
7. Route the cables through the boom cable hole or
side cable hole of the juncon box and connect the
cables.
8. Fix the juncon box cover on its body with three PM3
× 16 L6 screws that come with the juncon box.
Figure 2- Fix Juncon Box Cover on Its 10
Body
9. Refer to steps 6 to 7 of 2.1.1 Ceiling/Wall Mounng of
Type I Camera to adjust the viewing angle.
2.1.4 Wall Mounng with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Type I camera wall mounng and type II camera wall
mounng are similar. Following steps take type I
camera wall mounng as an example.
Steps:
5
1. Take apart the wall mount.
Main Body
Cover
Figure 2-11 Take Apart Wall Mount
2. Paste the drill template (supplied) to the place where
you want to install the camera.
3. Drill the screw holes with a 5.5 mm drill and insert the
supplied wall plugs.
Figure 2-12 Drill Template for Wall Mount
4. Attach the main body of the wall mount to the wall
and secure it with three PA4 × 25 screws (supplied).
Figure 2-13 Secure Main Body to Wall
5. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
6. Secure the camera to the cover of the wall mount with
three PM4 × 13 screws and three M4 screws.
PM4 × 13 screw
M screw4
Figure 2-14 Secure Camera to Wall Mount Cover
7. Route the cables through the cable hole of the wall
mount and connect the cables.
8. Insert one end of the wall mount cover diagonally into
the wall mount body, and then snap the other end of
the cover upward on the body.
6
Step 1
Step 2
Main Body
Cover
Figure 2-15 Secure Cover to Body
9. Lock the cover to the body with one PA3 × screw.13
Figure 2-16 Lock Cover to Body
10. Refer to steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting of
Type I Camera to finish installaon and adjust the
viewing angle.
2.2 Installaon of Type III Camera
2.2.1 Ceiling/Wall Mounng
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-17 Drill Template
3. Attach the installaon plate to the ceiling and secure it
with three PA4 × 25 screws (supplied).
Figure 2- Aach Installaon Plate to Ceiling 18
4. Fit the camera onto the installaon plate.
Figure 2- Fit Camera 19
7
5. Turn the camera clockwise unl it snaps into the
installaon plate.
Figure 2- Snap Camera into Installaon Plate 20
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image on
the live view is captured from the opmum angle. If
not, adjust the camera according to the gure below.
Rotaon Position
[0° to 360°]
Pan Position
[0° to 360°]
Tilt Position
[0° to °]75
Figure 2- 3-Axis Adjustment 21
1). Rotate the enclosure to adjust the pan posion [0°
to 360°].
2). Move the main body up and down to adjust the
tilt posion [0° to 75°].
3). Rotate the main body to adjust the rotaon
posion [0° 360°].to
2.2.2 Ceiling Mounng with Juncon Box/Inclined
Ceiling Mount
Before you start:
You need to purchase a juncon box or inclined ceiling
mount in advance.
Ceiling mounng with juncon box and inclined ceiling
mount are similar. Following steps take juncon box as
an example.
Steps:
1. Paste the drill template for juncon box to the place
where you want to install the camera.
2. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-22 Drill Template
3. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the juncon box.
5. Install the installaon plate to the juncon box cover
with three PM4 screws.
8
Figure 2-23 Install Installaon Plate Juncon Box Coverto
6. Fit the camera onto the installaon plate.
Figure 2- Fit Camera 24
7. Turn the camera clockwise until it snaps into the
installaon plate.
Figure 2- Snap Camera into Installaon Plate 25
8. Secure the juncon box body on the ceiling with four
PA4 × 25 screws.
Figure 2- Secure Juncon Box Body 26
9. Route the cables through the boom cable hole or
the side cable hole of the juncon box and connect
the cables.
10. Combine the juncon box cover with its body with
four PM4 screws.
Figure 2- Combine Juncon Box Cover with Body 27
9
11. Refer to step 7 of 2.2.1 Ceiling/Wall Mounng to
adjust the viewing angle.
2.2.3 Wall Mounng with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Type I Wall Mount
Steps:
1. Drill Ø10 mm screw holes in the wall where you want
to install the wall mount.
2. Use four M6 expansion bolts to x the wall mount
onto the wall.
Figure 2- Fix Wall Mount 28
3. Use three PM4 × 10 screws to x the installaon plate
onto the wall mount.
Figure 2- Fix Installaon Plate 29
4. Repeat the step 4 to 7 of 2.2.1 Ceiling/Wall Mounng
to nish the installaon.
Figure 2- Finish Installaon 30
Type II Wall Mount
1. Take apart the wall mount.
Main Body
Cover

Especificaciones del producto

Marca: Hikvision
Categoría: Cámara de vigilancia
Modelo: DS-2CE72KF3T-L

¿Necesitas ayuda?

Si necesitas ayuda con Hikvision DS-2CE72KF3T-L haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Hikvision Manuales

Hikvision

Hikvision DS-2CD2047G2H-LI Manual de Usario

27 Octubre 2024
Hikvision

Hikvision DS-2CE16H0T-IT1E Manual de Usario

27 Octubre 2024
Hikvision

Hikvision DS-TCP345D Manual de Usario

18 Octubre 2024
Hikvision

Hikvision DS-2CD4626FWD-IZHS/P Manual de Usario

17 Octubre 2024
Hikvision

Hikvision DS-2CD2522FWD-IS Manual de Usario

17 Octubre 2024
Hikvision

Hikvision iDS-2CD7526G0-IZHS(Y)(R) Manual de Usario

17 Octubre 2024
Hikvision

Hikvision DS-2DY5223IW-DM Manual de Usario

17 Octubre 2024
Hikvision

Hikvision DS-2TD6267T-50H4L Manual de Usario

17 Octubre 2024
Hikvision

Hikvision DS-2CE56D5T-AIRZ Manual de Usario

15 Octubre 2024
Hikvision

Hikvision DS-2TD2137-7/VP Manual de Usario

13 Octubre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024