Hikvision DS-7308HUI-K4 Manual de Usario
Hikvision
grabadora de voz
DS-7308HUI-K4
Lee a continuación 📖 el manual en español para Hikvision DS-7308HUI-K4 (220 páginas) en la categoría grabadora de voz. Esta guía fue útil para 19 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/220
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA i
User Manual
Digital Video Recorder (DVR)
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 2
User Manual
COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Turbo HD Digital Video Recorder (DVR).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in
the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find
the latest version in the company website ( ). http://overseas.hikvision.com/en/
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT
YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 3
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the EMC
Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 4
Applicable Models
This manual is applicable to the models listed in the following table.
Series Model
DS-73xxHUI-K4
DS-7304HUI-K4
DS-7308HUI-K4
DS-7316HUI-K4
DS-73xxHQI-K4
DS-7308HQI-K4
DS-7316HQI-K4
DS-7332HQI-K4
DS-90xxHUI-K8 DS-9008HUI-K8
DS-9016HUI-K8
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement important points
of the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury.
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of
the nation and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
with 100 to 240 VAC, 12 VDC or 48 VDC according to the IEC60950-1 standard. Refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating
or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 5
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.
Ensure to use the attached power adaptor only and not to change the adaptor randomly.
Product Key Features
General
Connectable to TurboHD and analog cameras
Supports UTC protocol for connecting camera over coax
Connectable to IP cameras
The analog signal inputs including TurboHD and CVBS can be automatically recognized without
configuration
Each channel supports dual-stream. And sub-stream supports up to WD1 resolution
The main stream of HUI Series supports up to 5 MP resolution of all the channels (HUI Series)
5 MP long distance transmission can be enabled for the analog cameras (HUI Series)
Independent configuration for each channel, including resolution, frame rate, bit rate, image
quality, etc.
The minimum frame rate for main stream and sub-stream is 1 fps
Encoding for both video stream and video & audio stream; audio and video synchronization during
composite stream encoding
Supports enabling H.265+/H.264+ to ensure high video quality with lowered bit rate
H.265+/H.265/H.264+/H.264 encoding for the main stream, and H.265/H.264 encoding for the
sub-stream of analog cameras
Connectable to H.265 and H.264 IP cameras
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 6
Defog level, night to day sensitivity, day to night sensitivity, IR light brightness, day/night mode, and
WDR switch configurable for the connected analog cameras supporting these parameters
4 MP/5 MP signal switch for the supported analog cameras
Watermark technology
Local Monitoring
HDMI output at up to 4K (3840 × 2160) resolution
There are two HDMI interfaces of which the HDMI1 and VGA interfaces share simultaneous output.
For HDMI1/VGA output, up to 1920 × 1080 resolution is supported. For HDMI2 output, up to 4K
(3840 × 2160) resolution is supported
1/4/6/8/9/16/25/36 screen live view is supported, and the display sequence of screens is adjustable
If the sum of the analog and IP channels exceeds 25, up to 32-window division mode is
supported for the VGA/HDMI1 output
Live view screen can be switched in group and manual switch and automatic cycle live view are also
provided, the interval of automatic cycle can be adjusted
CVBS output only serves as the aux output or live view output
Quick setting menu is provided for live view
The selected live view channel can be shielded
VCA information overlay in live view for the supported analog cameras and in smart playback for
the supported analog and IP cameras
Motion detection, video-tampering detection, video exception alarm, video loss alarm, and VCA
alarm functions
1-ch analog camera supports people counting and heat map functions
HUI Series supports line crossing detection and intrusion detection of all channels, and 2-ch sudden
scene change detection.
The enhanced VCA mode conflicts with the 2K/4K output and 4 MP/5 MP signal input (HUI Series)
Privacy mask
Several PTZ protocols (including Omnicast VMS of Genetec) supported; PTZ preset, patrol and
pattern
Zooming in/out by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
Each disk can have a maximum of 8 TB storage capacity
8 network disks (8 NAS disks, 8 IP SAN disks, or n N AS disks + m IP SAN disks (n+m ≤ 8)) can be
connected
Remaining recording time of the HDD can be viewed
Supports cloud storage
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 7
S.M.A.R.T. and bad sector detection
HDD sleeping function
HDD property: redundancy, read-only, read/write (R/W)
HDD group management
HDD quota management; different capacity can be assigned to different channels
Hot-swappable HDD supports RAID 0, RAID 1, RAID 5, RAID 6, and RAID 10 storage schemes, and
can be enabled and disabled on your demand. 16 arrays can be configured (DS-90xxHUI-K8 only)
Recording, Capture, and Playback
Holiday recording schedule configuration
Cycle and non-cycle recording modes
Normal and event video encoding parameters
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm, and
event
Supports POS triggered recording
Eight recording time periods with separated recording types
Supports Channel-Zero encoding
Main stream and sub-stream configurable for simultaneous recording
Pre-record and post-record for motion detection triggered recording, and pre-record time for
schedule and manual recording
Searching record files and captured pictures by events (alarm input/motion detection)
Customization of tags, searching and playing back by tags
Locking and unlocking of record files
Local redundant recording and capture
When TurboHD input is connected, the information including the resolution and frame rate will be
overlaid on the bottom right corner of the live view for five seconds. When CVBS input is
connected, the information such as NTSC or PAL will be overlaid on the bottom right corner of the
live view for five seconds.
Search and play back record files by camera number, recording type, start time, end time, etc.
Smart playback to go through less effective information
Main stream and sub-stream selectable for local/remote playback
Zooming in for any area when playback
Multi-channel reverse playback
Supports pause, fast forward, slow forward, skip forward, and skip backward when playback,
locating by dragging the mouse on the progress bar
4/8/16-ch synchronous playback
Manual capture, continuous capture of video images, and playback of captured pictures
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 8
Backup
Exports data to a USB or eSATA device
Exports video clips when playback
Video and Log, Video and Player, and Player are selectable to export for backup
Management and maintenance of backup devices
Alarms and Exceptions
Configurable arming time of alarm input/output
Alarms for video loss, motion detection, video tampering, illegal login, network disconnected, IP
confliction, record/capture exception, HDD error, and HDD full, etc.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and
alarm output
One-key disarms the linkage actions of the alarm input
PTZ linking for the VCA alarm
VCA detection alarm is supported
Supports POS triggered alarm
Supports coaxial alarm (requires camera with alarm I/O)
System will automatically reboot when a problem is detected in an attempt to restore normal
functionality
Other Local Functions
Manual and automatic video quality diagnostics
Operable by mouse and remote control
Three-level user management; admin user can create m any operating account and define their
operating permission, which includes the permission to access any channel
Completeness of operation, alarm, exceptions and log writing and searching
Manually triggering and clearing alarms
Importing and exporting of configuration file of devices
Getting cameras type information automatically
Unlock pattern for device login for the admin
Clear-text password available
GUID file can be exported for use in resetting the password
Multiple connected analog cameras supporting TurboHD can be upgraded simultaneously via the
DVR
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 9
Network Functions
Self-adaptive 100M or 1000M network interface
IPv6 is supported
TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, and HTTPS are
supported
Supports access by Hik-Connect. If you enable Hik-Connect, the device will remind you the Internet
access risk and ask you to confirm the “Terms of Service” and “Privacy Statement” before enabling
the service. You should create a verification code to connect to Hik-Connect.
TCP, UDP, and RTP for unicast
Auto/Manual port mapping by UPnP™
Remote search, playback, download, locking and unlocking the record files, and downloading files
broken transfer resume
Remote parameters setup; remote import/export of device parameters
Remote viewing of the device status, system logs and alarm status
Remote keyboard operation
Remote HDD formatting and program upgrading
Remote system restart and shutdown
Supports upgrading via remote FTP server
RS-485 transparent channel transmission
Alarm and exception information can be sent to the remote host
Remotely start/stop recording
Remotely start/stop alarm output
Remote PTZ control
Two-way audio and voice broadcasting
Output bandwidth limit configurable
Embedded Web server
If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server and
Alternate DNS Server
Development Scalability
SDK for Windows and Linux system
Source code of application software for demo
Development support and training for application system
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 10
Table of Contents
Product Key Features ........................................................................................................................... 5
1 Introduction ................................................................................................................................... 15
1.1 Front Panel ............................................................................................................................ 15
1.2 IR Remote Control Operations .............................................................................................. 17
1.2.1 Troubleshooting Remote Control ................................................................................... 19
1.3 USB Mouse Operation ........................................................................................................... 19
1.4 Input Method Description .................................................................................................... 20
1.5 Rear Panel ............................................................................................................................. 20
2 Getting Started ............................................................................................................................... 22
2.1 Starting Up and Shutting Down the DVR .............................................................................. 22
2.1.1 Starting the DVR .............................................................................................................. 22
2.1.2 Shutting Down/Logging Out/Rebooting the DVR ........................................................... 22
2.2 Activating the Device ............................................................................................................ 23
2.3 Using the Unlock Pattern for Login ....................................................................................... 24
2.3.1 Configuring the Unlock Pattern ...................................................................................... 25
2.3.2 Logging in via Unlock Pattern ......................................................................................... 26
2.3.3 Login and Logout ............................................................................................................. 27
2.3.3.1 User Login ............................................................................................................ 27
2.3.4 Resetting Your Password ................................................................................................ 28
2.3.5 Adding and Connecting IP Cameras ................................................................................ 30
2.3.5.1 Activating an IP Camera ...................................................................................... 30
2.3.6 Adding an Online IP Camera ........................................................................................... 33
2.3.7 Editing the Connected IP Camera ................................................................................... 37
2.3.8 Configuring Signal Input Channel.................................................................................... 39
2.3.9 Configuring 5 MP Long Distance Transmission ............................................................... 40
3 Live View ........................................................................................................................................ 41
3.1 Introduction .......................................................................................................................... 41
3.2 Live View Icons ...................................................................................................................... 41
3.3 Live View Mode Operations .................................................................................................. 42
3.3.1 Using the Mouse in Live View ......................................................................................... 43
3.3.2 Switching Main/Aux Output ........................................................................................... 43
3.3.3 Quick Setting Toolbar in Live View Mode ....................................................................... 44
3.4 Channel-Zero Encoding ......................................................................................................... 47
3.5 Adjusting Live View Settings ................................................................................................. 48
3.6 Manual Video Quality Diagnostics ........................................................................................ 49
4 PTZ Controls ................................................................................................................................... 50
4.1 Configuring PTZ Settings ....................................................................................................... 50
4.2 Setting PTZ Presets, Patrols, and Patterns ............................................................................ 52
4.2.1 Customizing Presets ........................................................................................................ 52
4.2.2 Calling Presets ................................................................................................................. 53
4.2.3 Customizing Patrols ........................................................................................................ 54
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 11
4.2.4 Calling Patrols.................................................................................................................. 56
4.2.5 Customizing Patterns ...................................................................................................... 56
4.2.6 Calling Patterns ............................................................................................................... 57
4.2.7 Customizing Linear Scan Limit ........................................................................................ 58
4.2.8 Calling Linear Scan .......................................................................................................... 59
4.2.9 One-Touch Park............................................................................................................... 60
4.3 PTZ Control Panel .................................................................................................................. 61
5 Recording and Capture Settings ..................................................................................................... 62
5.1 Configuring Encoding Parameters ......................................................................................... 62
5.2 Configuring Recording and Capture Schedule ...................................................................... 68
5.3 Configuring Motion Detection Recording and Capture ........................................................ 72
5.4 Configuring Alarm Triggered Recording and Capture ........................................................... 73
5.5 Configuring Event Recording and Capture ............................................................................ 75
5.6 Configuring Manual Recording and Continous Capture ....................................................... 76
5.7 Configuring Holiday Recording and Capture ......................................................................... 77
5.8 Configuring Redundant Recording and Capture ................................................................... 79
5.9 Configuring HDD Group ........................................................................................................ 81
5.10 Files Protection ..................................................................................................................... 82
5.10.1 Protect Record Files by Locking Them ............................................................................ 82
5.10.2 Protect File by Setting HDD to Read-Only ...................................................................... 83
5.11 One-Key Enable/Disable H.264+/H.265+, Analog Cameras .................................................. 84
5.11.1 Enabling ........................................................................................................................... 84
5.11.2 Disabling .......................................................................................................................... 85
5.12 Playback ................................................................................................................................ 85
5.12.1 Instant Playback by Channel ........................................................................................... 85
5.12.2 Playback by Normal Search ............................................................................................. 86
5.12.2.1 Playback by Channel ........................................................................................... 86
5.12.2.2 Playback by Time ................................................................................................ 87
5.12.3 Playback Interface ........................................................................................................... 87
5.12.4 Playback by Event Search................................................................................................ 88
5.12.5 Playback by Tag ............................................................................................................... 91
5.12.6 Playback by Smart Search ............................................................................................... 93
5.12.7 Playback by System Logs ................................................................................................. 97
5.12.8 Playback by Sub-Periods ................................................................................................. 98
5.12.9 Play Back External Files ................................................................................................... 99
5.13 Auxiliary Functions of Playback........................................................................................... 100
5.13.1 Playing Back Frame-by-Frame ...................................................................................... 100
5.13.2 Digital Zoom .................................................................................................................. 100
5.13.3 Multi-Channel Reverse Playback .................................................................................. 101
5.13.4 File Management .......................................................................................................... 102
5.14 Backup ................................................................................................................................. 102
5.14.1 Backup by Normal Video/Picture Search ...................................................................... 102
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 12
5.14.1.1 Using USB Flash Drives, USB HDDs .................................................................... 103
5.14.2 Backup by Event Search ................................................................................................ 105
5.14.3 Back Up Video Clips....................................................................................................... 106
5.15 Managing Backup Devices .................................................................................................. 107
6 Alarm Settings .............................................................................................................................. 108
6.1 Setting Motion Detection.................................................................................................... 108
6.2 Setting Sensor Alarms ......................................................................................................... 110
6.2.1 Detecting Video Loss ..................................................................................................... 112
6.2.2 Detecting Video Tampering .......................................................................................... 113
6.3 Setting All-Day Video Quality Diagnostics .......................................................................... 115
6.4 Handling Exceptions ............................................................................................................ 116
7 Setting Alarm Response Actions .................................................................................................. 118
8 POS Configuration ........................................................................................................................ 121
8.1 Configuring POS Settings ..................................................................................................... 121
8.2 Configuring Overlay Channel .............................................................................................. 125
8.3 Configuring POS Alarm ........................................................................................................ 126
9 VCA Alarm .................................................................................................................................... 128
9.1 Face Detection .................................................................................................................... 128
9.2 Vehicle Detection ................................................................................................................ 130
9.3 Line Crossing Detection....................................................................................................... 131
9.4 Intrusion Detection ............................................................................................................. 133
9.5 Region Entrance Detection ................................................................................................. 134
9.6 Region Exiting Detection ..................................................................................................... 135
9.7 Loitering Detection ............................................................................................................. 136
9.8 People Gathering Detection ................................................................................................ 136
9.9 Fast Moving Detection ........................................................................................................ 136
9.10 Parking Detection ................................................................................................................ 136
9.11 Unattended Baggage Detection .......................................................................................... 137
9.12 Object Removal Detection .................................................................................................. 137
9.13 Audio Exception Detection ................................................................................................. 137
9.14 Defocus Detection ............................................................................................................... 138
9.15 Sudden Scene Change ......................................................................................................... 139
9.16 PIR Alarm ............................................................................................................................. 139
10 VCA Search ................................................................................................................................... 140
10.1 Behavior Search .................................................................................................................. 140
10.2 Plate Search ......................................................................................................................... 141
10.3 People Counting .................................................................................................................. 142
10.4 Heat Map............................................................................................................................. 143
11 Network Settings .......................................................................................................................... 144
11.1 Configuring General Settings .............................................................................................. 144
11.2 Configuring Advanced Settings ........................................................................................... 146
11.2.1 Configuring PPPoE Settings ........................................................................................... 146
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 14
16 DVR Management and Maintenance ........................................................................................... 193
16.1 Viewing System Information ............................................................................................... 193
16.2 Searching Log Files .............................................................................................................. 193
16.3 Importing/Exporting IP Camera Info ................................................................................... 196
16.4 Importing/Exporting Configuration Files ............................................................................ 196
16.5 Upgrading System ............................................................................................................... 197
16.5.1 Upgrading by Local Backup Device ............................................................................... 197
16.5.2 Upgrading by FTP .......................................................................................................... 197
16.6 Upgrading Camera ............................................................................................................... 198
16.7 Restoring Default Settings ................................................................................................... 199
17 Other ............................................................................................................................................ 200
17.1 Configuring General Settings .............................................................................................. 200
17.2 Configuring RS-232 Serial Port ............................................................................................ 201
17.3 Configuring DST Settings ..................................................................................................... 202
17.4 Configuring More Settings .................................................................................................. 202
17.5 Managing User Accounts .................................................................................................... 205
17.5.1 Adding a User ................................................................................................................ 205
17.5.2 Deleting a User .............................................................................................................. 208
17.5.3 Editing a User ................................................................................................................ 209
18 Appendix ...................................................................................................................................... 212
18.1 Specifications ...................................................................................................................... 212
18.1.1 DS-73xxHUI-K4 .............................................................................................................. 212
18.1.2 DS-90xxHUI-K8 .............................................................................................................. 213
18.1.3 DS-73xxHQI-K4 .............................................................................................................. 214
18.2 Glossary ............................................................................................................................... 215
18.3 Troubleshooting .................................................................................................................. 216
18.4 List of Compatible Hikvision IP Cameras ............................................................................. 220
18.5 List of Compatible Third-Party IP Cameras ......................................................................... 220
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 15
NOTE: Figures in this manual are for illustration only; your screens may differ.
1 Introduction
1.1 Front Panel
Figure 1, DS-73xxHUI-K4, DS-73xxHQI-K4 Front Panel
Table 1-1 DS-73xxHUI-K4, DS-73xxHQI-K4 Front Panel Description
No.
Name
Function Description
1
POWER
Turns
green when DVR is powered up
READY
Turns
green, indicating that
the DVR is functioning properly
STATUS
T
urns
green
when devic
e is controlled by an IR remote
T
urns red when controlled by a keyboard a
nd purple when IR remote and
ke
yboard is used at the same time
ALARM
Turns
red
when a sensor alarm is detected
HDD
Flickers
red when data is be
ing read from or written to HDD
T
x
/R
x
Flickers
green when network connection is functio
ning properly
2
DVD
-
R/W
Slot for DVD
-
R/W
3 Composite
Keys
SHIFT
Switches between the numeric
or
letter input and
functions of the composite
keys. (Input letter or numbers when the light is out; Realize functions when the
light is red.)
1/MENU
Enter
s
numeral “1”
Access
es
the main menu interface
2/ABC/F1
Enter
s
numeral “2”
Enter
s
letters “ABC”
The F1 button when used in a list field will select all items in the list
T
urn
s
on/off
PTZ light
i
n PTZ Control mode,
and use
it
to
zoom out the image
S
witch
es
betw
een main and spot video output
i
n live view or playback mode
.
3/DEF/F2
Enter
s
numeral “3”
Enter
s
letters “DEF”
Uses the
F2 button is used to change the tab pages
Z
ooms in the image
i
n PTZ control mode
4/GHI/ESC
Enter
s
numeral “4”
Ent
er
s
letters “GHI”
Exit
s
and back to the previous menu
5/JKL/EDIT
Enter
s
numeral “5”
Enter
s
letters “JKL”
Delete
s
characters before cursor
Check the checkb
ox and select the ON/OFF switch
Start
s
/stop
s
record clipping in playback
6/MNO/PLAY
Enter
s
numeral “6”
Enter
s
letters “MNO”
A
ccess
es
to playback interface
i
n Playback mode
7/PQRS/REC
Enter
s
numeral “7”
Enter
s
letters “PQRS”
A
ccess
es
to manual record interface
M
anually enable
s
/disable
s
record
8/TUV/PTZ
Enter
s
numeral “8”
Enter
s
letters “TUV”
Access
es
PTZ control interface
9/WXYZ/PREV
Enter
s
numeral “9”
Enter
s
letters “WXYZ”
Multi
-
channel
display in
live view
0/A
Enter
s
numeral
“0”
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 16
No.
Name
Function Description
Shift
s
the input methods in the editing text field. (
Upper and lowercase,
alphabet, symbols or numeric input).
4
DIRECTION
N
avigate
s
between diffe
rent fields and items in menus
Uses
the Up and Down button
s
to speed up and slow down
the playing of
video
files in Playback mode.
The Left and Right button wi
ll select the next and previous record files.
C
ycle
s
through channels
i
n Live View mode
.
C
ontrol
s
the movement of the PTZ camera
i
n PTZ control mode
ENTER
C
onfirm
s
selection in any of
the menu modes
Checks the
checkbox
P
lay
s
or pause
s
the
pla
ying of
video
files i
n Playback mode
A
dvance
s
the video by a single frame
i
n single
-
frame Playback mode
S
top
s
/start
s
auto switch
i
n Auto
-
switch mode
5
POWER
Power on/off switch
6 JOG SHUTTLE Control
Move
s
the active selection
up and down
in a menu
C
ycle
s
through different channels
i
n
l
ive
v
iew mode
J
ump
s
30s forward/backward in video files
in
the
p
layback mode
C
ontrol
s
the movement of the PTZ camera
i
n PTZ control mode
Move
s
the active selection
up and down
in a menu
7 USB Interface
U
niversal Serial Bus (USB) ports for additional devices such as USB mous
e and
USB Hard Disk Drive (HDD)
8
IR Receiver
Receiver for IR remote
control
Figure 2, DS-90xxHUI-K8 Front Panel
Table 1-2 DS-90xxHUI-K8 Front Panel Description
No.
Name
Function Description
1
ALARM
R
ed when a sensor alarm is detected
READY
B
lue, indicating that the DVR is functioning properly
STATUS
B
lue when device is controlled
by an IR remote
R
ed when controlled by a keyboard and purple when IR remote and ke
yboard is used at the same time
HDD
Flickers red when data is be
ing read from or written to HDD
MODEM
Flickers blue when network connection is function
ing properly
Tx/Rx
B
lue when the device is in armed status; at this time, an alarm is enabled when an event is detected.
GUARD
Tu
rns off when the device is unarmed. The arm/disarm status can be changed by pressing and holding on
the ESC button for more than 3 seconds in live view mode.
R
ed when a sensor alarm is detected
2
IR Receiver
Receiver for IR remote
3
Front Panel Lock
L
ock
or unlock the panel by the key
4
DVD
-
R/W
Slot for DVD
-
R/W
5 Alphanumeric
Buttons
Switches to the corresponding channel in live view or PTZ c
ontrol mode
Inputs numbers and characters in e
dit mode
Switches between different channels in p
layback m
ode
B
lue when the corresponding channel is recording; turns red when the channel is in network transmission
status; turns pink when the channel is recording and transmitting.
6
USB Interfaces
Universal Serial Bus
ports for additional devices such as US
B mous
e and USB Hard Disk Drive (HDD)
7
ESC
Returns
to the previous menu
Presses for arming/disarming the device in live v
iew mode
REC/SHOT
Enters t
he Manual Record settings menu
Presses this button followed by a numeric button to call a PTZ prese
t in PTZ control settings
Turns audio on/off in the p
layback mode
PLAY/AUTO
Enters the p
layback mode
Automatically scans in the PTZ c
ontrol menu
ZOOM+
Zooms in the PTZ camera in the PTZ c
ontrol setting
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 17
No.
Name
Function Description
A/FOCUS+
Adjusts
focus in the PTZ Control
menu
Switches between input methods (upper and lower case alphabet, symbol
s and numeric input).
EDIT/IRIS+
Edits text fields. When editing text fields, it also deletes the ch
aracter in front of the cursor
Checks the checkbox in the checkbox fields
Adjusts the iris of the camera in PTZ control mode
Generates video clips for backup in playback mode
Enters/exits the fol
der of USB device and eSATA HDD
MAIN/SPOT/ZOOM-
Switches
between main and spot output
Zooms out the image in PTZ control
mode
F1/ LIGHT
Selects all items on the list when used in a list
field
Turns on/off PTZ light
(if applicable) in PTZ control mode
Switches between play and reverse play in playback mode
F2/ AUX
Cycles
through tab pages
Switches between channel
s in synchronous playback mode
MENU/WIPER
Returns to the Mai
n menu (after successful login)
Presses and holds the button for five seconds to
turn off audible key beep
Starts wiper (if applicable) in PTZ control mode
Shows/hides the control inter
face in playback mode
PREV/FOCUS-
Switches between singl
e screen and multi
-
screen mode
Adjusts the focus in conjunction with the A/FOCUS+ button in PTZ control mode
PTZ/IRIS-
Enters
the PTZ Control mode
Adjusts the iris of the PTZ camera in PTZ c
ontrol mode
8
DIRECTION
Navigates between different f
ields and items in menus
Uses the Up and Down buttons to speed up and slow down the playing of video files in Playback mode.
The Left and Right button will select the next and previous record files.
Cycles through channels in Live View mode
Controls the movement of the PTZ camera in PTZ control mode
ENTER
Confirms sele
ction in any of the menu modes.
Checks the checkbox
Plays or pauses the playing of video files in Playback mode
Advanc
es the video by a single frame in single
-
frame Playback mode
Stops/starts auto switch in Auto
-
switch mode
9 JOG SHUTTLE
Control
Moves the active selection up and down
in a menu
Cycles through different channels in live view mode
Jumps 30s forwar
d/backward in video files in the playback mode
Controls the movement of the PTZ camera in PTZ control mode
10
POWER ON/OFF
Power o
n/off switch
1.2 IR Remote Control Operations
The DVR may also be controlled with the included IR remote control.
If your system is secured with a password pattern, press ESC on the remote to display
the password input window and input the password by using a keyboard.
Batteries (2 × AAA) must be installed before operation.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 18
Figure 3, Remote Control
The keys on the remote control resemble the ones found on the front panel. See Table 1-3.
Table 1-3 Description of the IR Remote Control Buttons
No.
Name
Description
1 POWER
Power on/off the device.
Power on/off the
device
by pressing and holding the button for
5
seco
nds.
2 MENU Button
Press the button
to
return to the
m
ain menu (after successful login).
Press and hold the button for 5 seconds will turn off audible key beep.
In PTZ Control mode, the MENU button will start wiper (if applicable).
In Playback mo
de, it is used to show/hide the control interface.
3 REC Button
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a PTZ preset by pressing Numeric button.
It is also used to turn audio on/off in th
e Playback mode.
4
DIRECTION Button
N
avigate between different fields and items in menus.
In the Playback mode, the Up and Down button is used to speed up and slow down recorded video. The Left
and Right button will select the next and previous record
files.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, it can control the movement of the PTZ camera.
ENTER Button
C
onfirm selection in any of the menu modes.
It can also be used to
tick
checkbox fie
lds.
In Playback mode, it can be used to play or pause the video.
In single
-
frame Playback mode, pressing the button will advance the video by a single frame.
5
PTZ Button
In Auto
-
switch mode, it can be used to stop /start auto switch.
6
DEV
Enabl
es/Disables Remote Control.
7 Alphanumeric
Buttons
Switch to the corresponding channel in Live view or PTZ Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in
the
Playback mode.
8 ESC Button
Back to the pre
vious menu.
Press for Arming/disarming the device in Live View mode.
9 PLAY Button
The button is used to enter the All
-
day Playback mode.
It is also used to
auto scan in the PTZ Control menu.
10 PREV Button
Switch between single screen and multi
-
sc
reen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 19
1.2.1 Troubleshooting Remote Control
Make sure batteries have been installed properly. Also, note that the
remote control must be aimed at the IR receiver on the NVR front panel.
If there is no response after pressing any button on the remote, follow
the procedure below to troubleshoot.
Go to Menu > Configuration > General > More Settings by operating the
front control panel or the mouse.
Check and remember the DVR No. The default DVR No. is 255. This
number valid for all IR remote controls.
Press on the remote control. DEV
Enter the DVR No. in Step 2.
Press on the remote. ENTER
If the front panel Status indicator turns blue, the remote control is operating
properly. If the Status indicator does not turn blue and there is no response,
check the following:
Batteries are installed correctly and the polarities are not reversed.
Batteries are fresh and not out of charge.
IR receiver is not obstructed.
If the remote still does not function, change the remote and try again, or
contact the device provider.
1.3 USB Mouse Operation
A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR.
1. Plug mouse into a USB interface on the DVR. The mouse should automatically be
detected. If not, the mouse might not be compatible. Refer to your mouse provider.
Table 1-4 Description of the Mouse Control
Name
Action
Description
Left-Click
Single-Click
Live view: Select channel and show the quick set menu.
Menu: Select
and enter.
Double
-
Click
Live view: Switch between single
-
screen and multi
-
screen.
Drag
PTZ control: Wheeling.
Privacy mask and motion detection: Select target area.
Digital zoom-in: Drag and select target area.
Live view: Drag channel/time bar.
Right-Click Single-Click
Live view: Show menu.
Menu: Exit current menu to upper level menu.
Scroll-Wheel
Scrolling up
Live view: Previous screen.
Menu: Previous item.
Scrolling down
Live view: Next screen.
Menu: Next item.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 20
1.4 Input Method Description
Figure 4, Soft Keyboard
Description of the buttons on the soft keyboard:
Table 1-5 Description of the Soft Keyboard Icons
Icon Description Icon Description
… Number … English letter
Lowercase/Uppercase
Backspace
Switch the keyboard
Space
Positioning the cursor Enter
Symbols Reserved
1.5 Rear Panel
The rear panel varies by model. Refer to the actual product. The following figures are
for reference only.
Figure 5, DS-73xxHUI-K4 Rear Panel
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 21
Figure 6, DS-73xxHQI-K4 Rear Panel
Figure 7, DS-90xxHUI-K8 Rear Panel
Table 1-6 Description of DS-73xxHUI-K4, DS-73xxHQI-K4, and DS- 90xxHUI-K8 Rear Panel
No.
Item
Description
1
VIDEO IN
BNC interface for
Turbo
HD and analog
video input.
2
VIDEO OUT
BNC connector for video output.
3
AUDIO IN
/LOOP OUT (for
DS
-
90
xx
HU
I
-
K8
)
RCA connector
4
USB Port
Universal Se
rial Bus (USB) port for additional devices
.
5
HDMI1/VGA
S
imultaneous
HDMI1/
VGA output. Display local video output and menu.
6
HDMI2
HDMI2 video output connector
(DS
-
73xxHUI
-
K4 and DS
-
90xxHUI
-
K8)
7
AUDIO OUT
RCA connector
8
Network
Interface
Connector f
or
network
(DS
-
73xxHUI
-
K4 and DS
-
90xxHUI
-
K8 = x2, DS
-
73xxHUI
-
K4 = x1)
9 RS-485 and Alarm Interface
Connector for RS
-
485 devices. T+
and
T
-
pin
s
connect to
R+ and R
-
pins of
PTZ
receiver
respectively
.
D+, D
-
pin connects to Ta, Tb pin of controller. For
cascading devices, the first
D
VR’s D+, D
-
pin
should be connected with the D+, D
-
pin of the next
D
VR.
Connector for alarm input
Connector for alarm output
10
Power Supply
100
to
240
V
AC power supply
11
Power Switch
Switch for turn
ing
on/off the d
evice
12
GND
Ground
13
LINE IN
BNC connector for audio input
14
eSATA
Connects external SATA HDD, CD/DVD
-
R
W
15
RS
-
232 Interface
Connector for RS
-
232 devices
16
ALARM OUT
Connector for alarm output
17
AUDIO IN (for DS
-
90
xx
HU
I
-
K8)
RCA connector
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 22
2 Getting Started
2.1 Starting Up and Shutting Down the DVR
Purpose
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before You Start
Check that the voltage of the power supply is the same with the DVR’s requirement, and
the ground connection is working properly.
2.1.1 Starting the DVR
Check that the power supply is plugged into an electrical outlet. It is
HIGHLY recommended that an Uninterruptible Power Supply (UPS) be
used in conjunction with the device.
Turn on the power switch on the rear panel, and the Power indicator LED
should turn on indicating that the unit begins to start up.
After startup, the Power indicator LED remains on.
2.1.2 Shutting Down/Logging Out/Rebooting the DVR
Go to Menu > Maintenance.
Figure 8, Shutdown Menu
Click (lower left corner of screen) to display the Shutdown window.
Click one of the following:
Logout – Logs the current user out of the system.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 23
Shutdown – Shuts system down.
Reboot – Shuts system down and reboots.
Cancel – Cancels shutdown.
Click . Yes
Turn off the power switch on the rear panel.
Figure 9, Shutdown Prompt
2.2 Activating the Device
Purpose
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser,
SADP, or Client Software.
1. Input the same password in the and Create New Password Confirm New Password
text fields.
Figure 10, Settings Admin Password
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters) in order to increase the security
of your product. We also recommend that you reset your password regularly. Especially in high security
systems, resetting the password monthly or weekly can better protect your product.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 24
2. Click to save the password and activate the device. OK
Clear text password is supported. Click to see the clear text of the password. Click
the icon again and the password again becomes invisible.
3. After the device is activated, the Attention box pops up as below.
Figure 11, Attention Window
4. (Optional) Click to export the GUID. The Reset Password interface pops up. Click Yes
Export to export the GUID to the USB flash drive for password resetting.
Figure 12, Export GUID
5. After exporting the GUID, the Attention box pops up as below. Click to duplicate Yes
the password or to cancel it. No
Figure 13, Duplicate the Password
2.3 Using the Unlock Pattern for Login
Purpose
An can configure an unlock pattern for device login. admin
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 25
2.3.1 Configuring the Unlock Pattern
After the device is activated, enter the following interface to configure the
device unlock pattern.
Figure 14, Set Unlock Pattern
Use the mouse to draw a pattern among the nine dots on the screen.
Release the mouse when the pattern is done.
Figure 15, Draw the Pattern
Connect at least four dots to draw the pattern.
Each dot can be connected only once.
Draw the same pattern again to confirm it. When the two patterns match,
the pattern is configured successfully.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 26
Figure 16, Confirm the Pattern
If the two patterns are different, you must set the pattern again.
Figure 17, Reset the Pattern
2.3.2 Logging in via Unlock Pattern
Only the user has the permission to unlock the device. admin
Configure the pattern first before unlocking.
Right-click the mouse on the screen and select the menu to enter the
interface.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 27
Figure 18, Draw the Unlock Pattern
Draw the pre-defined pattern to unlock to enter the menu operation.
You can right click the mouse to log in via the normal mode.
If you have forgotten your pattern, you can select the Forget My Pattern
or Switch User option to enter the normal login dialog box.
When the pattern you draw is different from the pattern you have
configured, try again.
If you draw the wrong pattern seven times, the account will lock for one
minute.
Figure 19, Normal Login Dialog Box
2.3.3 Login and Logout
2.3.3.1 User Login
Purpose
You must log in to the device before operating the menu and
other functions.
1. Select the in the drop-down list. User Name
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 28
Figure 20, Login Interface
2. Input the . Password
3. Click to log in. OK
In the Login interface, for the admin user, if you have entered
the wrong password seven times, the account will be locked
for 60 seconds. For operators, if you have entered the wrong
password for five times, the account will be locked for 60
seconds.
Figure 21, User Account Protection for the Admin
Figure 22, User Account Protection for the Operator
2.3.4 Resetting Your Password
Purpose
If you forget the password, you can reset the password by importing admin
the GUID file, which was exported and saved in the local USB flash drive after
you activated the device.
On the user login interface, click to enter the Import Forget Password
GUID interface.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 29
Figure 23, Import GUID
Select the GUID file from the USB flash drive and click to pop up Import
the Reset Password interface.
Figure 24, Reset Password
Input the new password and confirm the password.
Click to save the new password. Then the Attention box pops up as OK
shown below.
Figure 25, GUID File Imported
Click and the Attention box as below pops up to remind you to OK
duplicate the password of the device to IP cameras that are connected
with default protocol. Click to duplicate the password or to cancel Yes No
it.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 30
Figure 26, Duplicate the Password
To retrieve a forgotten password, you must export the GUID file first.
Once the password is reset, the GUID file will be invalid. You can export a
new GUID file.
2.3.5 Adding and Connecting IP Cameras
2.3.5.1 Activating an IP Camera
Purpose
Before adding the camera, make sure the IP camera to be added is
in active status.
Select from the right-click menu in live view Add IP Camera
mode or go to . Menu> Camera> IP Camera
For the IP camera detected online in the same network
segment, the status shows whether it is active or Security
inactive.
Figure 27, IP Camera Management Interface
Click the inactive icon of the camera to enter the following
interface to activate it. You can also select multiple cameras
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 31
from the list and click the to activate the One-touch Activate
cameras in batch.
Figure 28, Activate the Camera
Set the password of the camera to activate it.
Use Admin Password: If you check this checkbox, the camera(s)
will be configured with the admin password of the operating
DVR.
Create New Password: If the admin password is not used, you
must create a new password for the camera and confirm it.
Figure 29, Level 0 (Inadequate) Strength Password
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 33
Figure 33, Level 3 and Level 4 Password Strength
STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your −
own choosing (using a minimum of eight characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters) in order to increase the security
of your product. We also recommend that you reset your password regularly. Especially in high security
systems, resetting the password monthly or weekly can better protect your product.
Click to finish activating the IP camera. The camera OK
security status will change to . Active
2.3.6 Adding an Online IP Camera
Purpose
Before you can get a live view or record of the video, add the network
cameras to the device’s connection list.
Before You Start
Ensure the network connection is valid and correct.
OPTION 1
Select from the right-click menu in live view mode or Add IP Camera
go to . Menu > Camera > IP Camera
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 34
Figure 34, IP Camera Management Interface
Online cameras with the same network segment will be detected and
displayed in the camera list.
Select the IP camera from the list and click to add the camera
(with the same admin password of the DVR). Or you can click
One-touch Adding to add all cameras (with the same admin password)
from the list.
Make sure the camera to add has already been activated by setting the
admin password, and the admin password of the camera is the same as
the DVR’s.
(Optional) Check the checkbox (for Initial Access) for Enable H.265
the connected IP camera supporting H.265. Then the IP camera will
be encoded with H.265.
(For encoders with multiple channels only) check the Channel Port
checkbox in the pop-up window, as shown in the following figure, and
click to add multiple channels. OK
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 37
Table 1-7 Explanation of the Icons
4. (Optional) Check the E
nable H.265 checkbox (For Initial Access) for
the connected IP camera supporting H.265. Then the IP camera will
be encoded with H.265.
2.3.7 Editing the Connected IP Camera
Purpose
After adding the IP cameras, the basic information of the camera is listed on
the interface, and you can configure the basic settings of the IP cameras.
1. Click to edit the parameters. You can edit the IP address, protocol,
and other parameters.
Figure 38, Edit IP Camera
Icon
Explanation
Icon
Explanation
EDIT (Pen): Press to edit basic IP camera
parameters ADD (+): Press to add the detected IP
camera
DISCONNECTED (!): Camera is
disconnected; click the icon to get camera’s
exception information
DELETE (Trash Can): Press to delete the
camera
PLAY (Right Triangle): Play connected
camera’s live video
ADVANCED (Gear): Press to go to
advanced settings window.
UPGRADE (Up Arrow): Upgrade the
connected camera’s firmware
DASH: No advanced settings available for
this camera
REPAIR (?): Press to attempt to repair the
connection
Security
Column
SECURITY: Shows camera status
(active/inactive) or password strength
(strong/medium/weak/risky)
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 38
Channel Port: If the connected device is an encoding device with multiple
channels, you can choose the channel to connect by selecting the channel
port No. in the drop-down list.
2. Click to save the settings and exit from the editing interface. OK
3. Drag the horizontal scroll bar to the right, and click to edit the
advanced parameters.
Figure 39, Network Configuration of the Camera
4. You can edit the camera network information and the password.
Figure 40, Password Configuration of the Camera
5. Click to save the settings and exit the interface. OK
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 39
2.3.8 Configuring Signal Input Channel
This chapter is applicable only to DS-73xx/90xxHUI-K Series DVRs.
Purpose
You can configure the analog and IP signal input types and enable 5 MP long
distance transmission.
1. Go to Menu > Camera > Signal Input Status.
Figure 41, Signal Input Status
2. Check this checkbox to select different signal input types: HD/CVBS and IP.
If you select HD/CVBS, four types of analog signal inputs including
TurboHD and CVBS can be connected randomly for the selected channel.
If you select IP, an IP camera can be connected to the selected channel.
3. Click to save the settings. Apply
You can view the maximum number IP cameras in the Max. IP Camera
Number text field. Disabling one analog channel will add one IP channel.
For DS-73xxHUI-K4 Series and DS-73xxHQI-K4 Series DVRs, the accessible
IP channels are X+2 (X refers to the disabled analog channel(s) of the DVR;
maximum is 10 IP cameras). For DS-9008HUI-K8, the accessible IP
channels are X+8 (X refers to the disabled analog channel(s) of the DVR;
maximum is 16 IP cameras). For DS-9016HUI-K8, the accessible IP
channels are X+16 (X refers to the disabled analog channel(s) of the DVR;
maximum is 36 IP cameras).
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 40
2.3.9 Configuring 5 MP Long Distance Transmission
This chapter is applicable only to HUI Series DVRs.
Purpose
You can configure 5 MP long distance transmission on the Signal Input Status
interface.
1. Go to Menu > Camera > Signal Input Status.
Figure 42, Signal Input Status (for DS-73xx/90xxHUI Series)
2. Click to enter the 5 MP Long Distance Transmission Settings
interface.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 41
Figure 43, 5 MP Long Distance Transmission Settings
3. Check this checkbox to enable 5 MP Long Distance Transmission of the
selected channel.
4. Click to save the settings. Apply
3 Live View
3.1 Introduction
Live View shows the video image from each camera in real time. The DVR will automatically
enter Live View mode when powered on. It is also at the very top of the menu hierarchy,
thus hitting ESC multiple times (depending on which menu you’re on) will bring you back to
Live View mode.
3.2 Live View Icons
In Live View mode, there are icons at the right top of the screen for each channel, showing
the status of the record and alarms in the channel, so that you can know whether the
channel is recorded, or if there are alarms as soon as possible.
Table 1-8 Description of Live View Icons
Icons
Descriptio
Alarm (video loss, tampering, motion detection, VCA, or sensor alarm)
Record (manual record, schedule record, motion dete
,
or alarm
triggered record)
Alarm & Record
Event/Exception (motion detection, sen
alarm
,
or exception
information.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 42
3.3 Live View Mode Operations
There are many functions provided in Live View mode. The functions are listed below.
• Single Screen: show only one screen on the monitor.
• Multi-screen: show multiple screens on the monitor simultaneously.
• Start Auto-switch: the screen is auto switched to the next one. You must set the dwell
time for each screen on the configuration menu before enabling the auto-switch.
Menu > Configuration > Live View > Dwell Time.
• Start Recording: normal record and motion detection record are supported.
• Output Mode: set the output mode to Standard, Bright, Gentle, or Vivid.
• Playback: play back the recorded videos for the current day.
• Aux/Main Monitor: the DVR checks the output interface connections to define the
main and auxiliary output interfaces. When the aux output is enabled, the main output
cannot perform any operations; you can perform some basic operations on the Live
View mode for the Aux output.
There are two HDMI interfaces. HDMI1 and VGA interfaces share simultaneous output. The
priority level for the main and aux output is HDMI2 > VGA/HDMI1. The CVBS output only
serves as the aux output or Live View output.
Table 1-9 Priorities of Outputs
S.N
.
HDMI2
VGA/HDMI
CVBS
Main output
Auxiliary output
F
or Live View Outpu
t Only
1
√
√
√
or
×
HDMI2
VGA/HDMI
CVB
2
√
or
×
×
√
or
×
HDMI2
CVBS
VGA/HDMI
3
×
√
√
or
×
VGA/HDMI
CVBS
HDMI2
For other DVRs with CVBS output, the VGA/HDMI output is the main output, and the CVBS
output is the aux output.
Table 1-10 Priorities of Outputs
S.
N
.
HDM
VGA
CVBS
Main output
Auxiliary output
1
√
or
×
√
or
×
√
or
×
VGA/HDM
CVBS
√ means the interface is in use, means the interface is out of use or the connection ×
is invalid. HDMI, VGA, and CVBS can be used at the same time.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 43
3.3.1 Using the Mouse in Live View
Refer to Table 1-11 for the description of mouse operation in live view mode.
Table 1-11 Mouse Operation in Live View
Name
Description
Menu
Enter the main menu of the system by right clicking the mouse.
Single Screen
Switch to the single full screen by cho
osing channel number from the
drop
-
down
list.
Multi
-
S
creen
Adjust the screen layout by
select
ing from the
drop
-
down
list.
Previous Screen
Switch to the previous screen.
Next Screen
Switch to the next screen.
Start/Stop
Auto-Switch
Enable/disable the a
uto
-
switch of the screens.
The
dwell time
of the live view configuration must be set before using
Start Auto
-
S
witch
.
Start Recording
Start recording of all channels,
Continuous
Recor
d
,
and Motion Detection Record
are selectable from
the
drop
-
down
list.
Add IP Camera
A shortcut to enter the IP camera management interface.
(For HDVR series only
Playback
Enter the playback interface and start playing back the video of the selected channel immediately.
PTZ Contro
A shortcut to enter the PTZ control int
erface of the selected camera.
Output Mode
Output Mode is configurable with Standard, Bright, Gentle and Vivid options.
Aux Monitor
Switch to the auxiliary output mode and the operation for the main output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is
disabled. You need to switch back to the Main output with the F1 button on front panel or VOIP/MON
button on IR remote control and then press the Enter button.
Figure 44, Right-click Menu
3.3.2 Switching Main/Aux Output
The CVBS output only serves as the aux output or Live View output.
1. Use the mouse wheel to double-click on the HDMI1/VGA, or HDMI2, or
HDMI/VGA output screen, and the following message box pops up.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 44
Figure 45, Switch Main and Aux Output
2. Use the mouse wheel to double-click on the screen ag ain to switch to the
aux output, or click to cancel the operation. Cancel
3. Select the to others from the right-click menu on the Menu Output Mode
monitor.
4. On the pop-up message box, click to reboot the device to enable the Yes
selected menu output as the main output.
You can select the under Menu > Configuration > Menu Output Mode
General > More Settings to , Auto HDMI1/VGA HDMI2 and and then
reboot the device to switch the main output.
3.3.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar that appears
when you click the screen.
Figure 46, Quick Setting Toolbar
Refer to Table below for description of the Quick Setting Toolbar icons.
Table 1-12 Description of Quick Setting Toolbar Icons
Icons
Descriptio
Icons
Descriptio
Icons
Descriptio
Start
/
Stop
Manual
Record
ing
Instant Playback
Audio On/Mute
PTZ Control
Digital Zoom
Image Settings
Close Live View
Face Detection
Information
Capture
Live View
Strategy
Fisheye
Instant Playback shows only the record in the last five minutes. If no record is found, it means
there is no record during the last five minutes.
Digital Zoom zooms in the live image. You can zoom in the image to different proportions (1 to
16x) by moving the sliding bar. You can also scroll the mouse wheel to control the zoom in/out.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 45
Figure 47, Digital Zoom
Image Settings icon enters the Image Settings menu. Drag the mouse or click to adjust the
image parameters, including brightness, contrast, and saturation.
Figure 48, Image Settings
Enable Face Detection by clicking the icon. The dialog pops up as shown in Figure 3-6. Click Yes
and the full-screen live view of the channel is enabled. Click to exit from full-screen mode. You can
configure face detection only when it is supported by the connected camera.
Figure 49, Enable Face Detection
Move the mouse onto the Information icon to show the real-time stream information, including
the frame rate, bit rate, resolution, and stream type.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 46
Figure 50, Information
When an H.264 IP camera is connected, the stream type is displayed as
H.264. When an IP camera supporting H.264+ is connected, the stream
type is displayed as H.264+. When IP camera supporting H.265 is
connected, the stream type is displayed as H.265. When IP camera
supporting H.265+ is connected, the stream type is displayed as H.265+.
For analog cameras supporting VCA, click the icon to show the VCA information. The configured
line or quadrilateral in the VCA configuration and target frame(s) will be shown on live view. Click the
icon again to hide the VCA information.
Figure 51, Enable VCA Information Overlay
In Live View, only analog cameras support VCA information overlay.
Enable VCA function first before showing the VCA information.
The VCA information is hidden by default. If the connected analog
camera does not support VCA, the icon displays grey and cannot be
operated.
For analog cameras, the VCA information includes line crossing detection
and intrusion detection.
The DVR supports VCA information overlay of only one channel. If you
enable the function of one channel, the other channels will disable the
function automatically.
Both single window and multi-window display modes support VCA
information overlay.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 48
3.5 Adjusting Live View Settings
Purpose
Live View settings can be customized. You can configure the output interface, dwell time
for screen to be shown, mute or turn on the audio, the screen number for each channel,
etc.
1. Go to Menu > System Configuration > Live View > Gene
ral.
Figure 53, Live View General
2. The settings available in this menu include:
• Video Output Interface: Selects the output to configure the settings.
3. You can select , , for video output interface. VGA/HDMI1 HDMI2 Main CVBS
• Live View Mode: Selects the display mode to be used for Live View.
• Dwell Time: The time in seconds to between switching of channels when dwell
enabling auto-switch in Live View.
• Enable Audio Output: Enables/disables audio output for the selected camera in Live
View mode.
• Volume: Adjusts the audio output volume.
• Event Output: Designates the output to show event video. If available, you can select
a different video output interface from the Video Output Interface when an event
occurs.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 49
• Full Screen Monitoring Dwell Time: Sets the time in seconds to show the alarm
event screen.
4. Set the camera order.
1) Click the tab and select View Video Output Interface from the drop-down list.
Figure 54, Live View Camera Order
2) Click a window to select , then double-click a camera to display in the camera list. it
Setting an ‘X’ means the window will not display any camera.
3) You can also click to start live view of all channels in order and click to stop
live view of all channels. Click or to go to the previous or next page.
4) Click . Apply
If the sum of the analog and IP channels exceeds 25, up to 32-window division mode
is supported for the VGA/HDMI1 output.
3.6 Manual Video Quality Diagnostics
Purpose
The video quality of the analog channels can be diagnosed manually and you can view the
diagnostic results from a list.
1. Go to Menu > Manual > Manual Video Quality Diagnostics.
Figure 55, Video Quality Diagnostics
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 50
2. Check the checkboxes to select the channels for diagnostics.
3. Click , and the results will be displayed on a list. You can view the video status Diagnose
and diagnostics time of the selected channels.
Figure 56, Diagnostics Result
Connect the camera to the device for the video quality diagnostics.
Three exception types can be diagnosed: Blurred Image, Abnormal Brightness, and
Color Cast.
4 PTZ Controls
4.1 Configuring PTZ Settings
Purpose
Follow the following procedure to set PTZ parameters. Configure PTZ parameters before
you control the PTZ camera.
1. Go to Menu > Camera > PTZ.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 51
Figure 57, PTZ Settings
2. Select the camera for PTZ setting in the drop-down list. Camera
3. Click to set the PTZ parameters. PTZ Parameters
Figure 58, PTZ General
4. Select the parameters of the PTZ camera from the drop-down list.
All the parameters should be exactly the same as the PTZ camera parameters.
For UTC cameras/domes connected, you can select the PTZ protocol to UTC. Make
sure the protocol selected here is supported by the connected camera/dome.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 52
When the UTC protocol is selected, all the other parameters such as baud rate, data
bit, stop bit, parity, and flow control are not configurable.
5. (Optional) Click to copy the settings to the other channels. Select the channels Copy
you want to copy to and click to return to the interface. OK PTZ Parameters Settings
Figure 59, Copy to Other Channels
6. Click to save the settings. OK
7. (Optional) Check the checkbox to enable the PTZ control of Enable Omnicast Control
the selected camera via Omnicast VMS of Genetec.
4.2 Setting PTZ Presets, Patrols, and Patterns
Before You Start
Ensure that the presets, patrols, and patterns are supported by PTZ protocols.
4.2.1 Customizing Presets
Purpose
Follow the steps below to set the preset location you want the PTZ camera to
point to when an event occurs.
1. Go to Menu > Camera > PTZ.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 53
Figure 60, PTZ Settings
2. Use the directional button to position the camera to the location you
want to set the preset. The zoom and focus operations can be recorded
in the preset as well.
3. Enter the preset No. (1 to 255) in the preset text field, and click Set to link
the location to the preset.
4. Repeat steps 2 and 3 to save more presets.
5. Click to clear the location information of the preset, or click Clear Clear
All to clear the location information of all presets.
4.2.2 Calling Presets
Purpose
This feature enables the camera to point to a specified position such as a
window when an event takes place.
1. Click in the lower-right corner of the PTZ setting interface, or press PTZ
PTZ on the front panel or click the PTZ Control icon in the quick
setting bar, or select the PTZ option in the right-click menu to show the
PTZ control panel.
2. Choose Camera in the drop-down list.
3. Click to show the general settings of the PTZ control. PTZ
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 54
Figure 61, PTZ Panel General
4. Click to enter the preset No. in the corresponding text field.
5. Click to call it. Call Preset
When the camera/dome connected and the PTZ protocol is set to UTC,
you can call preset 95 to enter the menu of the connected camera/dome.
Use the directional buttons on the PTZ control panel to operate the
menu.
4.2.3 Customizing Patrols
Purpose
Patrols can be set to move the PTZ camera to different key points and have it
stay there for a set duration before moving on to the next key point. The key
points correspond to the presets. The presets can be set following the steps
above in Customizing Presets.
1. Go to Menu > Camera > PTZ.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 55
Figure 62, PTZ Settings
2. Select patrol No. in the Patrol drop-down list.
3. Click to add key points to the patrol. Set
Figure 63, Key point Configuration
4. Configure key point parameters such as the key point No., duration to
stay at one key point, and patrol speed. The key point corresponds to the
preset. The determines the order the PTZ will follow while Key Point No.
cycling through the patrol. refers to the time span to stay at the Duration
corresponding key point. defines the speed the PTZ will move from Speed
one key point to the next.
5. Click to add the next key point to the patrol, or click to save the Add OK
key point to the patrol.
6. You can delete all the key points by clicking for the selected patrol, Clear
or click to delete all key points for all patrols. Clear All
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 56
4.2.4 Calling Patrols
Purpose
Calling a patrol moves the PTZ according the predefined patrol path.
Click in the lower-right corner of the interface, or press PTZ PTZ Settings
PTZ on the front panel or click the PTZ Control icon in the quick
setting bar, or select the PTZ option in the right-click menu to show the
PTZ control panel.
Click the tab to show the PTZ controls general settings. General
Figure 64, PTZ Panel General
Select a patrol in the drop-down list and click to call it. Call Patrol
You can click to stop calling it. Stop Patrol
4.2.5 Customizing Patterns
Purpose
Patterns can be set by recording the movement of the PTZ. You can call the
pattern to move the PTZ according to the predefined path.
Go to Menu > Camera > PTZ.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 57
Figure 65, PTZ Settings
Choose pattern number in the drop-down list.
Click and click corresponding buttons in the control panel to move Start
the PTZ camera. Click to stop movement. Stop
The movement of the PTZ is recorded as the pattern.
4.2.6 Calling Patterns
Purpose
Follow the procedure below to move the PTZ camera according to the
predefined patterns.
Click in the lower-right corner of the interface, or press PTZ PTZ Settings
PTZ on the front panel, or click the PTZ Control icon in the quick
setting bar, or select the PTZ option in the right-click menu to show the
PTZ control panel.
Click the tab to show the general settings of the PTZ control. General
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 59
Figure 67, PTZ Settings
Use the directional button to point the camera to the location you want
to set the limit, and click or to link the location to Left Limit Right Limit
the corresponding limit.
The speed dome starts linear scan from the left limit to the right limit.
You must set the left limit to the left of the right limit, and the angle
from the left limit to the right limit must be no more than 180°.
4.2.8 Calling Linear Scan
Purpose
Follow the following procedure to call the linear scan in the predefined scan
range.
Click in the lower-right corner of the interface, or press PTZ PTZ Settings
PTZ on the front panel, or click the PTZ Control icon in the quick
setting bar to enter the PTZ setting menu in live view mode.
Click the tab to show the one-touch function of the PTZ One-touch
control.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 60
Figure 68, PTZ Panel One-Touch
Click to start the linear scan and click again to Linear Scan Linear Scan
stop it.
You can click to clear the defined left limit and right limit data. Restore
The dome needs to reboot for settings to take effect.
4.2.9 One-Touch Park
Purpose
Certain speed dome models can be configured to start a predefined park
action (scan, preset, patrol, etc.) automatically after a period of inactivity
(park time).
Click PTZ PTZ Settings in the lower-right corner of the interface, or press
PTZ on the front panel, or click the PTZ Control icon in the quick
setting bar to enter the PTZ setting menu in live view mode.
Click the tab to show the PTZ control’s one-touch function. One-touch
Figure 69, PTZ Panel One-touch
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 61
3. There are three one-touch park types selectable. Click the corresponding
button to activate the park action.
4. Park (Quick Patrol): The dome starts the patrol from predefined preset 1
to preset 32 in order after the park time. Any undefined presets will be
skipped.
5. Park (Patrol 1): The dome starts moving according to the predefined
patrol 1 path after the park time.
6. Park (Preset 1): The dome moves to the predefined preset 1 location
after the park time.
The park time can only be set through the speed dome configuration
interface. The default value is 5s.
7. Click the button again to deactivate it.
4.3 PTZ Control Panel
There are two ways to enter the PTZ control panel.
• OPTION 1
In the interface, click on the lower-right corner, next to the PTZ Settings PTZ Back
button.
• OPTION 2
In Live View mode, press on the front panel or on the remote control, or PTZ Control
choose the PTZ Control icon in the quick setting bar, or select the PTZ Control
option in the right-click menu.
Click on the control panel. Configuration
In PTZ control mode, the PTZ panel will be displayed when a mouse is connected to
the device. If no mouse is connected, the icon appears in the lower-left corner
of the window, indicating that this camera is in PTZ control mode.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 62
Figure 70, PTZ Control Panel
Refer to Table 1-13 for description of the PTZ panel icons.
Table 1-13 Description of the PTZ Panel Icons
Icon Description Icon Description Icon Description
Direction
button and the
auto-cycle
button
Zoom+, Focus+,
Iris+ Zoom-, Focus-,
Iris-
The PTZ
movement
speed
Light on/off Wiper on/off
3D-Zoom Image
Centralization Menu
Switch to the
PTZ control
interface
Switch to the
one-touch
control
interface
Switch to the
general settings
interface
Exit Minimize
windows
5 Recording and Capture Settings
5.1 Configuring Encoding Parameters
1. Make sure that an HDD has been installed. If not, install and initialize an HDD. (Menu >
System Configuration > HDD)
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 63
Figure 71, HDD
2. Click tab to check the HDD storage mode (Menu > HDD > Storage Mode). Advanced
1) If the HDD mode is Quota, set the maximum record capacity.
2) If the HDD mode is Group, set the HDD group.
Figure 72, HDD – Storage Mode
3. Go to Menu > Record Information > Parameters.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 65
• Video Quality : Set the video quality of recording, with six levels configurable.
The Stream Type, Resolution, Bitrate Type, and Video Quality are not configurable for
the Main Stream (Event) of the IP Camera.
• Frame Rate: Set the frame rate of recording.
For HUI Series DVRs, when a 5 MP signal input is connected, the frame rate of the
main stream cannot exceed 12 fps. When a 4 MP signal input is connected, the frame
rate of the main stream cannot exceed 15 fps.
The minimum frame rate for main stream is 1 fps.
• Max. Bitrate Mode: Set the mode to General or Custom.
• Max Bitrate (Kbps): Select or customize the maximum bit rate for recording.
• Max. Bitrate Range Recommended: A recommended max. bit rate range is
provided for reference.
• Max. Average Bitrate (Kbps): Set the max. average bit rate, which refers to the
average amount of data transferred per unit of time.
• Video Encoding: You can configure H.264 or H.265 for the main stream
(continuous) of IP and analog cameras. Check the orEnable H.264+ Enable
H.265+ checkbox to enable this function. Enabling it helps to ensure high video
quality with a lowered bitrate.
When the connected IP camera does not support H.265, only H.264 can be seleted for
the main stream (continuous).
The analog and IP cameras support enabling H.264+/H.265+ if the video encoding is
H.264/H.265 for the main stream.
After enabling H.264+ or H.265+, the Bitrate Type Video Quality Max. Bitrate Mode, , ,
Max. Bitrate (Kbps), Max. Bitrate Range Recommend and are not configurable.
If H.265+ is enabled, line crossing detection and region entrance detection are not
supported.
For a connnected IP camera, H.264+ or H.265+ must be supported by the camera and
added to the DVR with the HIKVISION protocol.
5. Reboot the device to activate the new settings after enabling H.264+ or H.265+.
6. Click to configure additional parameters. More Settings
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 66
Figure 74, More Settings of Record Parameters (Quota Mode Shown)
• Pre-record: The amount of time to record before the scheduled time or event.
For example, if an alarm triggers recording at 10:00, if the pre-record time is 5
seconds, the camera starts recording at 9:59:55.
• Post-record: The time to record after the event or scheduled time. For example,
if an alarm recording ends at 11:00, if the post-record time is 5 seconds, it
records until 11:00:05.
• Expired Time: The time to keep the record files in the HDDs. Once this time is
exceeded, the files will be deleted. The files will be saved permanently if the
value is set to “0.” The actual retention time for the files should be determined
by the HDDs capacity.
• Redundant Record: Enabling redundant record means records will be saved in
the redundant HDD.
• Record Audio: Enable this feature to record the video with sound and disable it
to record the video without sound.
• Video Stream: Main stream, Sub-stream, and Dual-stream are selectable for
recording. Sub-stream records for a longer time in the same storage space.
Redundant Record is available only when the HDD mode is Group.
A redundant HDD is required for the redundant record function.
For network cameras, the Main Stream (Event) parameters are not editable.
7. Click to save the settings. Apply
8. Optionally, click to copy the settings to other analog channels if needed. Copy
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 67
Figure 75, Copy Camera Settings
9. Set encoding parameters for sub-stream.
1) Select the tab. Sub-Stream
Figure 76, Sub-Stream Encoding
2) Select a camera in the camera drop-down list.
3) Configure the parameters.
4) Click to save the settings. Apply
5) (Optional) If the parameters can also be used for other cameras, click to copy Copy
the settings to other channels.
The sub-stream resolution can be selected among WD1, 4CIF, and CIF.
The minimum frame rate for the sub-stream is 1 fps.
You can select the for the sub-stream of IP and analog cameras. For Video Encoding
analog cameras, H.264 and H.265 are selectable. For IP cameras supporting H.265,
you can select H.265 encoding mode.
10. Set parameters for capture.
1) Select the Capture tab.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 68
Figure 77, Capture Settings
2) Select a camera from the drop-down list.
3) Configure the parameters.
4) Click to save the settings. Apply
5) (Optional) If the parameters can also be used for other cameras, click to copy Copy
the settings to other channels.
The interval is the time period between two capturing actions. You can configure all
the parameters on this menu upon demand.
5.2 Configuring Recording and Capture Schedule
The DVR supports continuous, alarm, motion, motion | alarm, motion & alarm, event,
and POS triggered recording types.
In this chapter, the record schedule procedure is used as an example, and the same
procedure can be applied to configure a recording schedule.
Purpose
Set the record schedule, then the camera will automatically start/stop recording according
to the configured schedule.
1. Go to Menu > Record/Capture > Schedule.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 69
Figure 78, Record Schedule
Different recording types are marked in different color icons.
• Continuous: Scheduled recording
• Event: Recording triggered by any event triggered alarm
• VCA: Recording triggered by a VCA event
• None: No scheduled recording
2. Choose the camera you want to configure in the drop-down list. Camera
3. Check the checkbox. Enable Schedule
4. Configure the record schedule.
5. Edit the schedule
1) Click . Edit
2) Choose the day you want to set the schedule in the message box.
3) To schedule all-day recording, check the item checkbox. All Day
Figure 79, Edit Schedule – All Day
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 70
4) To arrange other schedules, leave the checkbox blank and set the Start/End 24HR
time.
Figure 80, Edit Schedule – Set Time Period
Up to eight periods can be configured for each day. Time periods cannot overlap each
other.
To enable Event, Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm),
and POS triggered recording, you must configure the motion detection settings, alarm
input settings or VCA settings as well.
5) Repeat the above steps 1 to 4 to schedule recordings for other days in the week. If
the schedule can also be set for other days, click . Copy
Figure 81, Copy Schedule to Other Days
The option is available when you enable holiday schedule in Holiday Holiday settings.
6) Click to save the settings and return to the upper level menu. OK
6. Draw the schedule
1) Click the color icon to select a record type in the event list on the right side of the
interface.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 71
Figure 82, Draw the Recording Schedule
Figure 83, Draw the Capture Schedule
2) Drag the mouse on the schedule.
3) Click an area outside of the schedule table to finish and exit from the drawing.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 73
Figure 85, Motion Detection – Mask
4) Click , and the channel information message box pops up. Set
Figure 86, Motion Detection Settings
5) Select the channels that you want the motion detection event to trigger recording.
6) Click to save the settings. Apply
7) Click to return to the upper level menu. OK
8) Exit the Motion Detection menu.
3. Configure the schedule.
4. Choose Motion as the record type.
5.4 Configuring Alarm Triggered Recording and Capture
Purpose
Follow the procedure to configure alarm triggered recording or capture.
1. Go to Menu > Recording Configuration > Trigger > Ala rm Input.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 74
Figure 87, Alarm Settings – Alarm Input
2. Select Alarm Input No.
3. Input Alarm Name.
4. Select (normally open) or (normally closed) for alarm type. N.O. N.C.
5. Check the checkbox to enable alarm. Enable
6. Click Set to set the triggered channels, arming schedule, linkage actions, and PTZ
linking.
Figure 88, Alarm Handling
7. Click to save the settings. Apply
8. Repeat steps 1 to 8 to configure other alarm input p arameters.
9. If the settings can also be applied to other alarm inputs, click and choose the Copy
alarm input number.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 76
2. Select a . Camera
3. Configure the detection rules for VCA events.
4. Click to configure the alarm linkage actions for the VCA events. Set
5. Select tab and select one or more channels that will start to record Trigger Channel
when a VCA alarm is triggered.
6. Click Apply to save the settings.
Figure 91, Set Triggered Camera of VCA Alarm
7. Enter interface (Menu > Record > Schedule > Record Record Schedule Settings
Schedule) and set Event as the record type.
5.6 Configuring Manual Recording and Continous Capture
Purpose
Follow these steps to set parameters for manual recording and continuous capture. Using
manual recording and continuous capture, you need to manually cancel the record and
capture. The manual recording and manual continuous capture is prior to the scheduled
recording and capture.
1. Go to Menu > Manual > Record.
Figure 92, Manual Record
2. Enable manual record.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 77
3. Click the status icon before the camera number to change it to , or click Analog
to enable manual record of all channels.
4. Disable manual record.
5. Click to change it to , or click to disable manual record of all Analog
channels.
After rebooting all the manual records enabled are canceled.
5.7 Configuring Holiday Recording and Capture
Purpose
Follow these steps to configure the record or capture holiday schedules for the year to have
different recording plans on holidays.
1. Go to Menu > Recording Configuration > Holiday.
Figure 93, Holiday Settings
2. Enable Edit Holiday schedule.
1) Click to enter the Edit interface.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 78
Figure 94, Edit Holiday Settings
2) Check the checkbox. Enable
3) Select Mode from the drop-down list (by Month, By Week, and By Date are
selectable).
3. Set the start and end date.
4. Click Apply to save settings.
5. Click to exit the Edit interface. OK
6. Go to Menu > Recording Configuration > Schedule.
7. Click on . Edit
8. Choose Holiday in the Schedule drop-down list or draw the schedule on the Holiday
timeline.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 79
Figure 95, Edit Schedule – Holiday
Up to eight periods can be configured for each day. Time periods cannot overlap each
other.
In the channel time table, both holiday schedule and normal day schedule are
displayed.
Repeat step 4 to set Holiday schedules for other channels. If the holiday schedule can
be used for other channels, click and choose the channel you want to apply the Copy
settings.
5.8 Configuring Redundant Recording and Capture
Purpose
Enabling redundant recording and capture saves the record files and captured pictures not
only in the R/W HDD but also in the redundant HDD, to effectively enhance data safety and
reliability.
Before You Start
Set the Storage mode in the HDD advanced settings to Group before setting the HDD
property to Redundant. There must be at least one other HDD in Read/Write status.
1. Go to Menu > System Configuration > HDD.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 82
Figure 99, HDD Advanced
2) Choose Group number in the drop-down list of Record on HDD Group
3) Check the channels you want to save in this group.
4) Click to save settings. Apply
After you have configured the HDD groups, configure the recording settings.
5.10 Files Protection
Purpose
You can lock the recorded files or set the HDD property to Read-only to protect the record
files from being overwritten.
5.10.1 Protect Record Files by Locking Them
Go to Menu > File Management.
Figure 100, Export
Select the channels you want to investigate by checking the
checkbox.
Configure the record mode, record type, file type, s tart time, and end
time.
Click to show the results. Search
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 90
Figure 113, Select Channels for Synchronous Playback
On the interface, select the main stream or sub-stream Event Playback
from the drop-down list for playback. The toolbar in the bottom part of
the interface can be used to control the playing process. Playback
Figure 114, Interface of Playback by Event
Pre-play and post-play can be configured for playback of event triggered
record files.
Pre-play: The time to play back before the event. For example, if an
alarm triggered the recording at 10:00, if the pre-play time is five
seconds, the video starts playback from 9:59:55.
DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 92
Figure 116, Add Tag
A maximum of 64 tags can be added to a single video file.
Click to check, edit, and delete tag(s).
Figure 117, Tag Management Interface
1) Select Tag from the drop-down list in the Playback interface.
2) Choose channels, edit start time and end time, then click to Search
enter the Search Result interface.
Enter a keyword into the Keyword textbox to search a tag on command.
Especificaciones del producto
| Marca: | Hikvision |
| Categoría: | grabadora de voz |
| Modelo: | DS-7308HUI-K4 |
¿Necesitas ayuda?
Si necesitas ayuda con Hikvision DS-7308HUI-K4 haz una pregunta a continuación y otros usuarios te responderán
grabadora de voz Hikvision Manuales
11 Octubre 2024
11 Octubre 2024
10 Octubre 2024
19 Septiembre 2024
9 Septiembre 2024
1 Septiembre 2024
24 Agosto 2024
23 Agosto 2024
23 Agosto 2024
22 Agosto 2024
grabadora de voz Manuales
- grabadora de voz Sony
- grabadora de voz Philips
- grabadora de voz Panasonic
- grabadora de voz Grundig
- grabadora de voz Motorola
- grabadora de voz Olympus
- grabadora de voz Toshiba
- grabadora de voz Abus
- grabadora de voz Aiwa
- grabadora de voz Airlive
- grabadora de voz Nedis
- grabadora de voz GPO
- grabadora de voz Kodak
- grabadora de voz RCA
- grabadora de voz Roland
- grabadora de voz DataVideo
- grabadora de voz Axis
- grabadora de voz Sanyo
- grabadora de voz Marquant
- grabadora de voz Marantz
- grabadora de voz Olympia
- grabadora de voz Audioline
- grabadora de voz Dahua Technology
- grabadora de voz Audiovox
- grabadora de voz GeoVision
- grabadora de voz Goclever
- grabadora de voz Boss
- grabadora de voz Tascam
- grabadora de voz Planet
- grabadora de voz Konig
- grabadora de voz Mpman
- grabadora de voz Trevi
- grabadora de voz D-Link
- grabadora de voz Swann
- grabadora de voz Zoom
- grabadora de voz Humax
- grabadora de voz Sangean
- grabadora de voz Saramonic
- grabadora de voz Line 6
- grabadora de voz Blackmagic Design
- grabadora de voz EverFocus
- grabadora de voz Gefen
- grabadora de voz Vivotek
- grabadora de voz M-Audio
- grabadora de voz Lervia
- grabadora de voz Provision ISR
- grabadora de voz Livescribe
- grabadora de voz Oregon Scientific
- grabadora de voz Speco Technologies
- grabadora de voz Kguard
- grabadora de voz Neo
- grabadora de voz Epcom
- grabadora de voz Hanwha
- grabadora de voz LifeGood
- grabadora de voz Syscom
- grabadora de voz Lectrosonics
- grabadora de voz Pixel Maker
- grabadora de voz Sound Devices
- grabadora de voz AVTech
- grabadora de voz Feelworld
- grabadora de voz Majestic
- grabadora de voz HiLook
- grabadora de voz Jammin Pro
- grabadora de voz Mach Power
- grabadora de voz Qian
Últimos grabadora de voz Manuales
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
21 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
7 Octubre 2024
7 Octubre 2024
3 Octubre 2024