Hikvision DS-K7M-AW100 Manual de Usario
Hikvision
sistema de control de acceso
DS-K7M-AW100
Lee a continuación 📖 el manual en español para Hikvision DS-K7M-AW100 (2 páginas) en la categoría sistema de control de acceso. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
UD18549B
The figures are for reference only.
The two power outputs (12V) can be connected with the lock or
terminal.
For security reasons, you should install the rubber rings (accessory) in
the cable holes to protect the cables from being scarified by the burrs
on the cable holes.
DS-K7M-AW100 Power Supply
User Manual
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates
(hereinaer referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or
distributed, parally or wholly, by any means, without the prior wrien permission of Hikvision.
Unless otherwise expressly stated herein, Hikvision does not make any warranes, guarantees or
representaons, express or implied, regarding to the Manual, any informaon contained herein.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvi-
sion.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognion features, biometrics data is stored in your device with encrypon
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protecon laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as, implemenng reasonable administrave and
physical security controls, conduct periodic reviews and assessments of the effecveness of your
security controls.
1Appearance
2Internal Appearance and Wiring
373 mm
370 mm 92.3 mm
89.8 mm
345 mm
Key Hole Cable Hole
Vent
Power Interface
Installaon Hole
100 W
Power Supply
Baery
Circuit Board Baery Bracket
Installaon Hole
Baery (Oponal)
12V Ouptut Power Supply Cable
12V Ouptut
Power Supply Cable
Case
Installaon Hole
12V_R
GND
12V_D
Fire-
Fire+
GND
BUTTON
GND
12V_IN
GND
BAT+
BAT-
12V Output
12V
Output
3
Installation
1
3
2
Regulatory Information
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the RE Direcve 2014/53/EU, the EMC Direcve
2014/30/EU, the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points.
For more informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentaon for specific baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon see:
www.recyclethis.info
FCC Conditions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following
two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
FCC Information
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal installaon.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not occur in a
parcular installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between
the radiator and your body.
Safety Instruction
These instrucons are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precauon measure is divided into Warnings and Cauons:
Warnings: Neglecng any of the warnings may cause serious injury or death.
Cauons: Neglecng any of the cauons may cause injury or equipment damage.
Warnings
In the use of the product, you must be in strict compliance with the electrical safety regulaons of the naon and region.
The equipment must be connected to an earthed mains socket-outlet.
Shock hazard! Disconnect all power sources before maintenance.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Hazardous live and the external wiring connected to the terminals requires installaon by an instructed person.
Please make sure that the power has been disconnected before you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
Never place the equipment in an unstable locaon. The equipment may fall, causing serious personal injury or death.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service center. Never aempt to disassemble the device yourself. (We
shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
Cauons
Do not drop the device or subject it to physical shock, and do not expose it to high electromagnesm radiaon. Avoid the equipment installaon on
vibraons surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specificaon of the device for the detailed operang temperature), cold, dusty or damp
locaons, and do not expose it to high electromagnec radiaon.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low venlaon or heat source such as heater or radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfuncon however), and affecng
the endurance of sensor at the same me.
Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may
erode the surface coang of the device cover.
Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the
original wrapper. Transportaon without the original wrapper may result in damage on the device and lead to addional costs.
Install the equipment according to the instrucons in this manual.
Keep the switch downwards when moving or using the equipment.
Keep at least 10 mm distance around the equipment for sufficient venlaon.
The venlaon should not be impeded by covering the venlaon openings with items, such as newspapers, table-cloths, curtains, etc. The openings
shall never be blocked by placing the equipment on a bed, sofa, rug or other similar surface.
5
Case Door
4
1. Open the case door with key and disassemble the case door.
2. Disassemble the protecon cover on the power supply.
4. Assemble the protection cover back.
5. Assemble the case door back.
5. Finish installation.
3. Secure the case body on the mounng area.
1) Drill holes on the mounng area according to the mounng holes at the
boom of the case body.
2) Instert the expansion sleeves into the drilled holes.
3) Align the case body and the drilled holes. And secure the case body on
the mounng area with 3 set screws (PA4 × 35).
4) Complete the wiring inside the case.
Protecon Cover
To prevent injury, this equipment must be
securely aached to the mounng area in
accordance with the installaon instrucons.
This equipment is suitable for mounng on
concrete or other non-combusble surface
only.
Scan QR code below to get the device command and communicaon matrix.
Device Command Communication Matrix
Especificaciones del producto
Marca: | Hikvision |
Categoría: | sistema de control de acceso |
Modelo: | DS-K7M-AW100 |
Color del producto: | Zwart |
Pantalla incorporada: | Ja |
Peso.: | 2900 g |
Ancho: | 140 mm |
Profundidad: | 315 mm |
Altura: | 210 mm |
Indicadores LED: | Ja |
Interruptor encendido / apagado: | Ja |
Mostrar.: | LED |
Temperatura del color: | 5500 K |
voltaje-de-entrada-de-CA: | 90-265 V |
Flitsvermogen (máx.): | 1000 Ws |
Potencia de flash (mín.): | 7 Ws |
Duración del flash (potencia máxima): | 1/5260 s |
Reflector incluido: | Ja |
Tiempo mínimo de carga (aproximadamente): | 1.2 s |
Tiempo máximo de carga (aproximadamente): | 5 s |
¿Necesitas ayuda?
Si necesitas ayuda con Hikvision DS-K7M-AW100 haz una pregunta a continuación y otros usuarios te responderán
sistema de control de acceso Hikvision Manuales
16 Octubre 2024
6 Octubre 2024
19 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
13 Septiembre 2024
12 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
sistema de control de acceso Manuales
- sistema de control de acceso Honeywell
- sistema de control de acceso Abus
- sistema de control de acceso Apc
- sistema de control de acceso Acti
- sistema de control de acceso Viking
- sistema de control de acceso Dahua Technology
- sistema de control de acceso GeoVision
- sistema de control de acceso Marmitek
- sistema de control de acceso Delta Dore
- sistema de control de acceso EQ3
- sistema de control de acceso ASSA ABLOY
- sistema de control de acceso Provision ISR
- sistema de control de acceso Suprema
- sistema de control de acceso Speco Technologies
- sistema de control de acceso ZKTeco
- sistema de control de acceso HID Identity
- sistema de control de acceso Panduit
- sistema de control de acceso Indexa
- sistema de control de acceso Gewiss
- sistema de control de acceso SOREX
- sistema de control de acceso Atlantis Land
Últimos sistema de control de acceso Manuales
8 Octubre 2024
3 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024