Hikvision DS-K7R01-868 Manual de Usario
Hikvision
sistema de control de acceso
DS-K7R01-868
Lee a continuación 📖 el manual en español para Hikvision DS-K7R01-868 (2 páginas) en la categoría sistema de control de acceso. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Wireless Keyfob
User Manual
UD20280B
Indicator
Open (Entrance)
Close/Pair
Press: Close Door
Hold for 10 s: Pair Keyfob
Open (Exit)
Remain Open
( )Hold for 1.5 s
Metal Hook
Disassembling Groove
Indicator Red Instruction:( )
F lash Once Press the Key:
F lash Twice Keyfob Paired:
Flash 2s: Low Battery
1 Disassemble the groove .
according to the arrow. 2 Remove the rear panel and .
you can see the battery slot.
Battery Slot
3 Place a supplied battery .
(Model: 12V23A) into the slot.
Pay attention to the polarity
on the device. Do not install the
battery in the wrong direction.
Battery
4 Assemble the rear panel.
back to the front panel .
Power On1Pair Keyfob2
One to One Mode- - :
By default, the keyfob is in one-to one mode. The keyfob s- '
DIP switch is towards 1 (OFF) In this mode the keyfob can . ,
only control one turnstile .
Power on the turnstile and make sure the turnstile is in the
normal mode. Set the DIP switch according to the turnstile's
user manual and make sure the turnstile has entered the
one-to one pairing mode.
Reboot the turnstile and make sure no other turnstiles have
paired with the keyfob within the available pairing distance .
Hold Close for more than 10 s and the keyfob starts " " ,
pairing.
After pairing completed the keyfob s indicator will flash , '
twice If pairing failed the indicator is off. , .
You can also . pair the keyfob via the client software For
details see the turnstile s user manual, ' .
One-to-Many Mode:
The keyfob s DIP switch is ON In this mode the keyfob can' . ,
control multiple turnstiles .
Power on the turnstile and make sure the turnstile is in the
normal mode. Set the DIP switch according to the turnstile's
user manual and make sure the turnstile has entered the
one-to-many pairing mode.
Reboot the turnstile. Hold "Close" for more than 10 s, and
the keyfob starts pairing .
After pairing, the keyfob's indicator will flash twice.
You can also pair the keyfob via the client software. For
details see the turnstile s user manual, ' .
1
ON
1 Default ( ):
One-to One Pairing Mode-
ON:
One-to-Many Pairing Mode
DIP
1 Appearance
The pictures here are for reference only.
2 Quick Operation
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reser ved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting
the Product.
Trademarks
and other Hikvision's trademarks and logos are the proper ties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the proper ties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES
NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS
OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT
OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
REL ATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example,
for device with facial recognition features, biometrics data is stored in your device with
encr yption method; for fingerprint device, only fingerprint template will be saved, which is
impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance
with the applicable data protection laws and regulations, including without limitation,
conducting security controls to safeguard personal data, such as, implementing reasonable
administrative and physical security controls, conduct periodic reviews and assessments of the
effectiveness of your security controls.
Factors may affect the usage:
1. (Obstacles Wall etc, .);
2. People are walking near the turnstile
or the keyfob;
3. .There are metals near the turnstile
首次使用，请先激活设备
3 Specification Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warning
All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other
related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required
value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the
service center.
If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the
device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
Caution
identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.
No naked flame sources, such as lighted candles, should be placed on the equipment.
Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment
installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty
or damp locations, and do not expose it to high electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause
fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction
however), and affecting the endurance of sensor at the same time.
Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of
the fingers may erode the surface coating of the device cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory
with the original wrapper.
Transportation without the original wrapper may result in damage on the device and lead to additional costs.
Working voltage 12 V
Working
temperature -10 ℃ to 55 ℃
Working humidity 10% to 90%
(No condensing)
Protective level IP40
Battery
Support
Life span: Above 4 month
(If use 100 times per day,
25 °C)
Key lifes pan ＞ 500,000 times
Transmission
distance 15 m
Indicator Red LED light
Frequency 433MHz
Dimension 80 mm × 36 mm × 20 mm
DS-K7R01-433 Wireless Keyfob
Working voltage 12 V
Working
temperature -10 ℃ to 55 ℃
Working humidity 10% to 90%
(No condensing)
Protective level IP40
Battery
Support
Life span: Above 4 month
(If use 100 times per day,
25 °C)
Key lifes pan ＞ 500,000 times
Transmission
distance 50 m (Open area)
Indicator Red LED light
Frequency 868MHz
Dimension 80 mm × 36 mm × 20 mm
DS-K7R01-868 Wireless Keyfob
Especificaciones del producto
| Marca: | Hikvision |
| Categoría: | sistema de control de acceso |
| Modelo: | DS-K7R01-868 |
¿Necesitas ayuda?
Si necesitas ayuda con Hikvision DS-K7R01-868 haz una pregunta a continuación y otros usuarios te responderán
sistema de control de acceso Hikvision Manuales
16 Octubre 2024
6 Octubre 2024
19 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
13 Septiembre 2024
12 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
sistema de control de acceso Manuales
- sistema de control de acceso Honeywell
- sistema de control de acceso Abus
- sistema de control de acceso Apc
- sistema de control de acceso Acti
- sistema de control de acceso Viking
- sistema de control de acceso Dahua Technology
- sistema de control de acceso GeoVision
- sistema de control de acceso Marmitek
- sistema de control de acceso Delta Dore
- sistema de control de acceso EQ3
- sistema de control de acceso ASSA ABLOY
- sistema de control de acceso Provision ISR
- sistema de control de acceso Suprema
- sistema de control de acceso Speco Technologies
- sistema de control de acceso ZKTeco
- sistema de control de acceso HID Identity
- sistema de control de acceso Panduit
- sistema de control de acceso Indexa
- sistema de control de acceso Gewiss
- sistema de control de acceso SOREX
- sistema de control de acceso Atlantis Land
Últimos sistema de control de acceso Manuales
8 Octubre 2024
3 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024