Hitachi LE39S406 Manual de Usario

Hitachi Television LE39S406

Lee a continuación 📖 el manual en español para Hitachi LE39S406 (29 páginas) en la categoría Television. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/29

Simulated image.

Image may differ from actual product.

Owner’s Guide

Models:

LE39S406/LE39H316

39” Class (38.57” Diagonal)

LE32S406/LE32H316

32” Class (31.51” Diagonal)

EN 2

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT

ALL TIMES.

CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE

EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void

the user’s authority to operate this equipment.

ENERGY STAR®

This television’s factory default settings as shipped meet ENERGY STAR requirements.

Please see the Convenience Functions section of this operating guide for more information on factory settings and the energy saving

Auto Shut Off feature.

LEAD NOTICE

This product contains lead. Dispose of this product in accordance with applicable environmental laws. For product recycling and

disposal information, contact your local government agency or www.eRecycle.org (in California), the Electronic Industries Alliance

at www.ecyclingcentral.com (in the U.S.) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada). FOR MORE

INFORMATION, 1-800-289-0981 (USA/CANADA), 01-800-703-0885 (MEXICO).

Location of the required Marking

The rating sheet and the safety caution are on

the rear of the unit.

3 EN

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not

be placed on the apparatus.

16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts

that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

19) If an outside antenna or cable system is connected to the unit, be sure

the antenna or cable system is grounded to provide some protection

against voltage surges and built-up static charges, Section 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with

respect to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, connection

to grounding electrodes, and requirements for the grounding

electrode.

20) When replacement parts are required, be sure the service technician

uses replacement parts specified by the manufacturer or those that

have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

22) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall

outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other

equipment carefully and follow the instructions when making any connections.

23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is

equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high

volume sound, it may cause hearing damage.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ANTENNA

LEAD IN WIRE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUND

CLAMP

ELECTRIC SERVICE

EQUIPMENT

-NATI

NAL

ELECTRICAL CODE

S2898A

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

IMPORTANT SAFETY INSTRUCTIONS

Especificaciones del producto

Marca:	Hitachi
Categoría:	Television
Modelo:	LE39S406
Tipo de operación:	Buttons, Lever
poder del magnetrón:	1000 W
Color del producto:	Roestvrijstaal
Bisagras de puerta:	Neer
Pantalla incorporada:	Ja
Peso.:	39000 g
Ancho:	595 mm
Profundidad:	531 mm
Altura:	454 mm
Impuesto neto:	3600 W
Longitud del cable:	1.8 m
Iluminación interior:	Ja
Cocinar por convección:	Ja
tipo-de-lámpara:	Halogeen
Capacidad interior total (hornos):	- l
Número de hornos:	1
Número de programas automáticos:	70
Posición de control:	Voorkant
tipo de limpieza:	Pyrolytisch
Actual:	16 A
Consumo de energía (convencional):	- kWu
Consumo de energía (convección forzada):	- kWu
Cocinar:	Ja
tipo de horno:	Elektrische oven
Potencia total del horno:	- W
Horno de capacidad neta:	- l
magnetrón:	Ja
Autolimpieza:	Ja
Botones presionables:	Ja
Indicador de calor residual:	Ja
Material interior:	Roestvrijstaal
Número de posiciones de estante:	3
Dimensiones interiores (An x Pr x Al):	424 x 366 x 226 mm
Número de niveles de energía de microondas:	5
voltaje-de-entrada-de-CA:	230-240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LED