Honeywell TH8110R1008/U Manual de Usario

Honeywell Termostato TH8110R1008/U

Lee a continuación 📖 el manual en español para Honeywell TH8110R1008/U (12 páginas) en la categoría Termostato. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
VisionPRO® Series with RedLINK
Installation Guide
TM
TM
OR
OR
Wired Directly to Equipment
2 Wires for Power or
Battery Only (no wires)
2 Wires for Power or
Battery Only (no wires)
Dual Powered - C Wire or Battery
(C wire or Wire Saver required to use RedLINK accessories)
RedLINK to Equipment Interface Module
RedLINK to rTrueZONE Wireless Adapte
M37817
TM
2
Current display. Underlined label
signifies the current display.
Mode control buttons. Use to change
settings for Fan or System Heat/Cool.
Menu. Select options to: set schedules,
view equipment status, change IAQ
settings, access installer options*, etc.
Current status. Shows system mode
(heat/cool), outdoor temperature and
humidity (with optional outdoor sensor).
Current schedule. Shows desired
temperature and schedule status.
Indoor conditions. Shows indoor
temperature and humidity.
Current Time.
Alert Light. On when alert
message is active or system is set to Em
Heat. Flashes for battery-only power; on
continuous for 24 VAC.
microSD Card Port. Use
card to load settings and dealer
information.
Reference to key features
* Password is the date code.
Getting started
Follow these basic steps to install this
thermostat, link it with the wireless
accessories, and set installer options.
1 Installing the thermostat
2 Powering optional RedLINK accessories
3 Performing initial setup
4 Finding your password (Date Code)
To add or remove RedLINK accessories
To make changes to Installer Setup
To perform an Installer Test
M34164B
1-800- 468-1502
Cus t o m er .Re s id e o
.co m
Manu factur ed by Resideo Technologies, Inc.,
1985 D ouglas Dr . N. Golden Val ley, MN 55 422
Country of origi n: Mexico
Pays d’origine : Mexiqu e
RoHS Complia nt
Conformité RoHS
TH8321R1001
4
2126
M34161B
1-800-468-1502
Customer.Resideo
.com
Manufactured by Resideo Technologies, Inc.,
1985 Douglas Dr. N. Golden Valley, MN 55422
Count of origin: Mexicory
Pays d’origine : Mexique
RoHS Compliant
Conformité RoHS
TH8321R1001
4
2126
Thermostat (back view)
Password
(Date Code)
3
NOTE: For best RedLINK
performance, mount thermostats at
least 2 feet apart.
1.1 Separate wallplate from
thermostat.
If your thermostat has a button
along the top of the wallplate, press
button on top and pull to remove
the wallplate as shown. Updated
models do not have this button. On
those models pull evenly along the
sides and bottom of the thermostat
to separate it from the wallplate.
1.3 Connect power.
1.3a Insert supplied AA alkaline
batteries for primary or
backup power.
NOTE: When the thermostat is
NOT used with the Equipment
Interface Module or the
TrueZONE Wireless Adapter, a C
wire is required for RedLINK.
C 3 000
S1
S1
W
Y
G
W2
Y2
A
S1
S1
O/B
Y
G
AUX
-E
Y2
L/A
K
RC
R
U1
U1
U2
U2
C
CONVENTIONAL
HEAT PUMP
1.3b For 24VAC primary power,
connect common side of
transformer to C terminal.
1.2 Mount wallplate as shown.
Mount new wallplate using
screws and anchors included
with the thermostat.
Drill 3/16-in holes for drywall.
Drill 7/32-in holes for plaster.
Thermostat (back view)
Wallplate
(back view)
Wallplate
S1
S1
W
Y
G
W2
Y2
A
C
K
R
C
R
U1
U1
U2
U2
S1
S1
O/B
Y
G
AUX
-E
Y2
L/A
Thermostat
Button
1Installing the thermostat

Especificaciones del producto

Marca: Honeywell
Categoría: Termostato
Modelo: TH8110R1008/U

¿Necesitas ayuda?

Si necesitas ayuda con Honeywell TH8110R1008/U haz una pregunta a continuación y otros usuarios te responderán




Termostato Honeywell Manuales

Termostato Manuales

Últimos Termostato Manuales