Honeywell Turbo Force HT-906 Manual de Usario

Honeywell Ventilador Turbo Force HT-906

Lee a continuación 📖 el manual en español para Honeywell Turbo Force HT-906 (18 páginas) en la categoría Ventilador. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/18

Owner’s Manual

The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

TURBO FORCE®

HIGH VELOCITY

OSCILLATING POWER AIR

CIRCULATOR

HT-906 Series

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING

THIS FAN

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

FOR US MODELS ONLY - This product

employs overload protection (fuse). A

blown fuse indicates an overload or short-

circuit situation. If the fuse blows, unplug

the product from the outlet. Replace the

fuse as per the user servicing instructions

(follow product marking for proper fuse

rating) and check the product. If the

replacement fuse blows, a short-circuit

may be present and the product should

be discarded or returned to an authorized

service facility for examination and/or

repair.

1. Use this fan only as described in this

manual. Other use not recommended,

may cause fire, electric shock or injury to

persons.

2. This product is intended for household

use ONLY and not for commercial,

industrial or outdoor use.

3. To protect against electric shock, do not

place fan in window, immerse unit, plug

or cord in water or spray with liquids.

4. This appliance has a polarized plug (one

blade is wider than the other). To reduce

the risk of shock, this plug is intended

to fit only one way in a polarized outlet.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician.

DO NOT attempt to defeat this safety

feature.

5. Close supervision is necessary when any

appliance is used by or near children.

6. Turn the fan to the position and OFF

unplug the fan from the outlet when not

in use, when moving the fan from one

location to another and before cleaning.

7. To disconnect the fan, first turn control to

the OFF position, grip the plug and pull

it from the wall outlet. Never pull by the

cord.

8. Do not operate the fan in the presence of

explosive and/or flammable fumes.

9. Do not place the fan or any parts near

an open flame, cooking or other heating

appliance.

10. Do not operate the fan with a

damaged cord or plug or if the product

malfunctions, is dropped or damaged in

any manner (see warranty).

11. Avoid contact with moving fan parts.

12. The use of attachments not

recommended by the manufacturer may

be hazardous.

13. Place the fan on a dry level surface.

14. Do not hang or mount fan on ceiling.

USER SERVICING INSTRUCTIONS

1. Grasp plug and remove from the receptacle or other outlet device. Do

not unplug by pulling on cord.

2. If your fan loses power and you suspect that the fuse on your fan has

blown, you should first remove the spare fuse holder attached to the

cord plug (Fig. 1). Remove the spare fuse from the plastic spare fuse

holder, and set the spare fuse aside (Fig. 2).

3. You can gain access to the blown fuse by sliding open the door found

on the side of the plug. Slide the door outward until the blown fuse is

fully visible (Fig. 3).

4. Remove the blown fuse and snap the replacement fuse into place. Risk

of fire. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with

product). Fully close the fuse door by sliding back into place. Discard

the blown fuse. The plug should now be ready for normal use

5. Risk of fire. Do not replace attachment plug. Contains a safety device

(fuse) that should not be removed. Discard product if the attached plug

is damaged.

6. If you need further information on how or when to replace the fuse in

the safety plug, please contact Kaz Consumer Relations Department by

visiting our website at www.HoneywellFanSavings.com or

calling 1-800-477-0457.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an

electrical fault occurs. Please see below for more information on how to properly use your fan and

replace the safety plug fuse, if needed.

FUSED SAFETY PLUG - FOR US MODELS ONLY

Fig. 1

Fig. 2

Fig. 3

15. Do not operate if the fan housing is

removed or damaged.

16. A loose fit between the AC outlet

(receptacle) and plug may cause

overheating and a distortion of the plug.

Contact a qualified electrician to replace

loose or worn outlet.

17. Do not operate any fan with a damaged

cord or plug. Discard any damaged fan,

or return the fan to the retailer where the

fan was purchased, or request a return

authorization to return to Kaz USA, Inc. for

examination and/or repair.

18. Do not run fan cord under carpeting. Do

not cover cord with throw rugs, runners,

or similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic areas and where it

will not be tripped over.

WARNING: To Reduce The Risk of Fire

or Electric Shock, Do Not Use This Fan With

Any Solid State Speed Conrol Device

The Turbo Force® High Velocity Air Circulator Fans are aerodynamically

designed to give you the versatility of changing this fan’s angular direction

simply by adjusting the fan to the desired angular output (Fig.1). Upon using

this fan, you will feel a strong and powerful air stream that will quickly

move air to provide a cooling effect.

INTRODUCTION

Fig. 1

FOR ENERGY

SAVINGS ALL YEAR

Honeywell Air Circulator Fans can help save energy and can

lower monthly utility bills all year round. Our air circulators

increase distribution of cooler air from your air conditioner or

warmer air from your heating system, creating a vortex of air

flow for increased comfort. Increased air flow allows the air

conditioning and heating systems to be used at lower settings

to help save you money.

In the summer:

Circulate cool

air by using

with window

or central air

conditioning.

Circulate cool

air upstairs.

In the winter:

Circulate warm

air. Position

your air

circulator in an

open location

for upward air

movement.

Run it on a low

setting to move

the hotter air

from the ceiling

and circulate

the warmer air

throughout the

room.

Increase Heating Source Efficiency: Use

with other heat sources, such as wood stoves,

baseboard heaters, and or vents to help

circulate the warm air throughout the room.

Especificaciones del producto

Marca:	Honeywell
Categoría:	Ventilador
Modelo:	Turbo Force HT-906
Color del producto:	Zwart
Peso.:	780 g
Ancho:	204 mm
Profundidad:	134 mm
Altura:	21.5 mm
Peso del embalaje:	1020 g
Ancho del embalaje:	245 mm
Empaquetadura en profundidad:	185 mm
Altura del embalaje:	75 mm
Amable:	AV-zender
Manual de usuario:	Ja
Tipo de embalaje:	Doos
Herramientas de montaje:	Ja
Tipo de conector USB:	USB Type-B
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Resolución Máxima:	3840 x 2160 Pixels
Tipo de fuente de energía:	DC
Cables suministrados:	IR
Incluye adaptador de CA:	Ja
Tipo de conexión en serie:	RS-232
Número de conexiones USB:	1
HDCP:	Ja
Velocidad máxima de actualización:	30 Hz
Conexión para adaptador de red:	Ja
Versión HDMI:	2.0
Entrada remota (IR):	1
Certificados de sostenibilidad:	CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA
Cantidad por paquete:	1 stuk(s)
Temperatura de almacenamiento:	-20 - 60 °C
Protocolos de red compatibles:	IP
Humedad de almacenamiento:	20 - 90 procent
Cumplimiento de la sostenibilidad:	Ja
Corriente de salida:	1 A
Salida remota (IR):	1
Alimentación a través de Ethernet (PoE):	Ja
Entrada HDMI:	1
Versión HDCP:	2.2
Banda-ancha:	18 Gbit/s
Número de salidas HDMI:	1
Puertos de entrada RJ-45:	1
Puertos seriales):	1
Tensión de funcionamiento:	12 V
Rango-maximo:	100 m
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 90 procent
Tipos de cables compatibles:	Cat6
3,5 mm en:	Ja
Salida de 3,5 mm:	Ja
Tipos de enchufes incluidos:	AU, EU, UK, US
Rango de frecuencia infrarroja (IR):	20 - 60 kHz