Hooker 5750-75410-LTWD Manual de Usario
Lee a continuación 📖 el manual en español para Hooker 5750-75410-LTWD (2 páginas) en la categoría Silla. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
1/2
ASSEMBLY INSTRUCTION
Item#:5750 75410- - LTWD Upholstered Side Chair
** Please make sure you have all prior to assembly.parts indicated below
Assembly Steps:
There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair
during assembly.
1. Place chair back (G) on a clean surface.
2. T ighten seat frame (I) to chair back (G) by using bolt ), lock washer (B) and flat washer (C (A) at the
center location. (see diagram 2) Then tighten seat frame (I) to chair back (G) by using bolts (E),
lock washers (B), flat washers at corner blocks (A) . (See diagram 1)
3. Please follow numbers on legs (F) and corner blocks. front corner Assemble front legs (F) onto
blocks of seat frame (I), using bolts (C), lock washers (B) and flat washers (A). Tighten all bolts by
hand. (See diagram 2)
4. After all bolts are attached and hand tightened, turn the chair upright.
5. Level the chair following the “chair leveling instruction” as below.
6. Make sure the chair is level and then tighten all bolts completely by using allen wrench . (D)
Diagram 2
Diagram 1
2/2
PLEASE READ THESE INSTRUCTIONS PRIOR TO ASSEMBLING THE
CHAIRS
CHAIR LEVELING INSTRUCTION SUPPLEMENT
Chair leveling procedures:
To make the assembly process easy and efficient, please read the entire instruction sheet prior to
assembling the chair. Make sure all hardware listed is included. To properly assemble the chair, none of
the bolts should be fully tightened until all components are attached to the chair. This will allow an
opportunity to level the chair and prevent any unnecessary “rocking”.
1. Place the loosely assembled chair on a hard flat surface.
2. Apply gentle downward pressure on the seat. This step eliminates rocking and ensures the chair to
be level.
3. Once the chair is level, tighten all bolts and nuts.
Note:
Most floors have slight irregularities that can affect chair leveling. If your chair is uneven when placed
in its desired location, perform the following steps:
1. Loosen front legs to finger tight.
2. Extend both front legs ward to their fullest length.up
3. Gently push downward on the front edge of the seat until all four legs rest on the floor.
4. -Re tighten all bolts and nuts.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Especificaciones del producto
| Marca: | Hooker |
| Categoría: | Silla |
| Modelo: | 5750-75410-LTWD |
¿Necesitas ayuda?
Si necesitas ayuda con Hooker 5750-75410-LTWD haz una pregunta a continuación y otros usuarios te responderán
Silla Hooker Manuales
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
Silla Manuales
- Silla IKEA
- Silla Jysk
- Silla Sharkoon
- Silla Florabest
- Silla Chicco
- Silla Hazet
- Silla Pride
- Silla Hauck
- Silla Fisher Price
- Silla Razer
- Silla Mio
- Silla Kwantum
- Silla MADE
- Silla Zuiver
- Silla Foppapedretti
- Silla Silver Cross
- Silla Phil And Teds
- Silla Shoprider
- Silla Interstuhl
- Silla Butler
- Silla Munchkin
- Silla Alpha Gamer
- Silla Gamdias
- Silla Four Hands
- Silla Park Tool
- Silla Summer Infant
- Silla DXRacer
- Silla Prixton
- Silla Potenza
- Silla Dorel
- Silla AeroCool
- Silla Royal Catering
- Silla Sentore
- Silla Space
- Silla Backforce
- Silla Thunder X3
- Silla Comfort
- Silla StyleWorks
- Silla ProLine II
- Silla Valencia
- Silla BIOS Living
- Silla Fromm-Starck
- Silla Uniprodo
- Silla Physa
Últimos Silla Manuales
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
16 Octubre 2024
16 Octubre 2024
16 Octubre 2024