Horizon Fitness 7.0AT Manual de Usario

Lee a continuación 📖 el manual en español para Horizon Fitness 7.0AT (10 páginas) en la categoría Rueda de andar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
7.0AT- TREADMILLS 03
TM1 002C
SERVICE MANUAL
ISSUED - -07 2022 06
JOHNSON HEALTH INDUSTRY (VIETNAM)
V1
S I ERIAL NUMBER NFORMATION
Table of Contents
7.0AT-03
5
Service Manual
Product Record
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
P M REVENTIVE AINTENANCE
Table of Contents
7.0AT-03
8
Service Manual
The running belt has been properly adjusted at the factory before it was shipped. At mes the belt can
move o-center during shipment. Before operang the treadmill, make sure the belt is centered and
remains centered to maintain smooth operaon.
If the running belt is too far to the right side: With the
treadmill running at 1 mph, turn the le adjustment bolt
counter-clockwise ¼ turn at a me (using the supplied
Allen wrench). Check the belt alignment. Allow belt to run
a full cycle to gauge if more adjustment is needed. Repeat
if necessary, unl the belt remains centered during use.
If the running belt is too far to the le side: With the
treadmill running at 1mph, turn the le adjustment bolt
clockwise ¼ turn at a me (using the supplied Allen
wrench). Check the belt alignment. Allow belt to run a full
cycle to gauge if more adjustment is needed. Repeat if
necessary, unl the belt remains centered during use.

Especificaciones del producto

Marca: Horizon Fitness
Categoría: Rueda de andar
Modelo: 7.0AT

¿Necesitas ayuda?

Si necesitas ayuda con Horizon Fitness 7.0AT haz una pregunta a continuación y otros usuarios te responderán




Rueda de andar Horizon Fitness Manuales

Rueda de andar Manuales

Últimos Rueda de andar Manuales