Hotpoint HA70BI 31 S Manual de Usario

Hotpoint Refrigerador HA70BI 31 S

Lee a continuación 📖 el manual en español para Hotpoint HA70BI 31 S (24 páginas) en la categoría Refrigerador. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
1. Freezer Operation Button
2. Super Freeze Button
3. Super Freeze Blue Light
4. Freezer Temperature Yellow Light
5. Fridge Temperature Yellow Light
6. Speed Cool Blue Light
7. Speed Cool Button
8. Refrigerator Operation Button
APPLIANCE
CONTROL PANEL
1. Control panel*
2. Fruit and vegetable compartment*
3. Food Care Zone 0°C/
Safe Defrost*
4. Freezer and storage compartment
5. Movable shelves*
6. Temperature ındicator*
7. Bottle rack*
8. Bottle shelf*
9. Levelling feet
* Varies by number and/or position,
available only on certain models.
8
9
2
7
3
5
6
4
1
1 2 3 4
5 7
86
ACCESSORIES
BOTTLE RACK
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait at
least 4-6 hours before placing food into the fridge and into
the freezer compartment.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge - freezer compartment settings light-up.
DAILY USE
FUNCTIONS
FREEZER OPERATION BUTTON
To regulate the temperature the freezer compartment.
Button is used with SUPER FREEZE Button to switch on/
switch o the product by pressing both 3 seconds.
FREEZER TEMPERATURE
To adjust the Freezer Temperature, press the Freezer
Operation °C button. The Freezer Temperature can be
adjusted between -18°C and -26°C, as shown by the Freezer
Temperature LEDs.
SUPER FREEZE
The use of this function is recommended when placing a very
high quantity of food to be frozen in the freezer compartment.
Press the SUPER FREEZE button to enable or disable the
function. When the Super Freeze function activated, blue light
illuminates on the freezer display. After 24 hours place the
food to be frozen in the upper basket of freezer compartment.
The function is automatically disabled after 48 hours, or can be
manually disabled by pressing Super Freeze °C button.
FRIDGE TEMPERATURE
To adjust the Fridge Temperature, press the Fridge Operation
°C button. The Fridge Temperature can be adjusted between
+2°C and +8°C, as shown by the Fridge Temperature LEDs.
SPEED COOL
Using Speed Cool function it is possible to increase the
cooling in the refrigerator compartment. The use of this
function is recommended when placing a very high quantity
of food in the refrigerator compartment. Press the Speed cool
button to activate Speed Cool function. When speed cooling
function is activated, blue light illuminates on the refrigerator
display. The function is automatically disabled after 6 hours, or
can be manually disabled by pressing Speed cool button.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.If the LED light system does not work,
please contact the Service to replace it.
SMART DISPLAY
This optional function can be used to save energy. To activate
the Smart Display, press Fridge °C and Freezer °C buttons
at the same time for 3 seconds until an audible signal sounds.
To deactivate this function repeat the same procedure.
Remember 3 that this function does not disconnect the
appliance from the power supply, but only reduce the power
consumed by external display.
TEMPERATURE INDICATOR*
Temperature indicator informs you if the temperature in this
cavity is cold enough for storage with the word “OK”.
1. Check that OK appears clearly on the indicator light (see
the picture below).
2. If the word “OK” does not appear it means that the
temperature is too high: set a lower temperature and wait
approximately 10 hours until the temperature has been
stabilised.
3. Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK.
Wait at least 10 hours before adjusting the REFRIGERATOR
OPERATION knob to a higher setting.
See Use and Care Guide for more details on functions / see last
page for information on how to obtain the Use and Care Guide
EN
FOOD CARE ZONE 0°C/SAFE DEFROST*
A compartment designed to keep delicate food such as meat
and sh fresh. The low temperature in the compartment
makes it possible to store the food for up to one week -
tests performed on meat products - without changing its
nutrients, appearance and avour.The compartment is also
very suitable for healthy food defrosting, as lowtemperature
defrosting prevents any proliferation of microorganisms,
while protecting its taste and organoleptic properties. It is
not suitable for fruit, vegetables and green salad. But it can
be used for stued fresh pasta and even cooked food or
leftovers.
FRUIT AND VEGETABLE BIN*
The salad crispers tted inside the fridge have been specially
designed for the purpose of keeping fruit and vegetables
fresh and crisp. Open the humidity regulator (position B)
if you want to store food in a less humid environment like
fruit, or close it (position A) to store food in a more humid
environment like vegetable.
A
B
A
B
SHELVES*
Due to the special guides the shelves are removable and the
height is adjustable, allowing easy storage of large containers
and food.
ALARM TABLE
ALARM TYPE SIGNAL CAUSE SOLUTION
Door open alarm. Refrigerator Light blinks.
Alarm Indicator blinks. The door has remained open
for more than 2 minutes. Close the door or press the Stop Alarm
to mute the acoustical alarm.
Temparature
Alarm.
Refrigerator Light OFF. The door has remained open
for more than 4 minutes.
Close the door.
Malfunction. Any temperature indicators
blinks. Product malfunction. Contact the After-sales Service.
SOME OF THE FUNCTIONAL SOUNDS
YOU MIGHT HEAR
A hissing sound when switching on the
appliance for the rst time or after a long
pause.
A gurgling sound when refrigerant uid
enters into the pipes. BRRR sound is from the compressor
running.
Buzzing sound when water valve or fan
start working.
A cracking sound when compressor
starts.
The CLICK is from the thermostat which
adjusts how often the compressor is
running.

Especificaciones del producto

Marca: Hotpoint
Categoría: Refrigerador
Modelo: HA70BI 31 S

¿Necesitas ayuda?

Si necesitas ayuda con Hotpoint HA70BI 31 S haz una pregunta a continuación y otros usuarios te responderán




Refrigerador Hotpoint Manuales

Refrigerador Manuales

Últimos Refrigerador Manuales