Hotpoint HSZ12A2D Manual de Usario

Hotpoint congelador HSZ12A2D

Lee a continuación 📖 el manual en español para Hotpoint HSZ12A2D (10 páginas) en la categoría congelador. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
Instructions for use
3
ENGLISH Instructions for use Page 4
Always disconnect the appliance from the power supply before replacing the light bulb. Then follow
the instructions based on the type of light bulb for your product.
Replace the light bulb with one with the same features, available from the Technical Assistance Service
and authorised sellers.
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as
shown in the figure. Wait 5 minutes before reconnecting the appliance.
- traditional light bulb (max 25W)
or
- LED light bulb (with the same features)
only available from the Technical Assistance Service
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance
Service if you need a replacement.
LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly.
4
Clean the appliance occasionally with a cloth and a solution of warm
water and neutral cleaning agents specifically for cleaning the inside
of the refrigerator. Do not use abrasive cleaning agents. To ensure
the constant and correct flow of the defrosting water, regularly clean
the inside of the drain situated in the back wall of the refrigerator
compartment near the fruit and vegetable drawer using the utensil
provided (see figure).
Before carrying out any maintenance or cleaning, take the plug out of the socket or disconnect the
appliance from the power supply.
Connect the appliance to the power supply.
In models with electronics, a sound signal may be emitted, which means that the temperature alarm
has been activated: press the sound alarm off button. Where provided, position the antibacterial anti-
odour filter in the fan as demonstrated in the filter packaging.
Note: After turning the appliance on, you must wait for 4-5 hours for the correct storage temperature
to be reached for a normally filled appliance.
USING FOR THE FIRST TIME
MAINTENANCE AND CLEANING
OF THE APPLICANCE
REPLACING THE LIGHT BULB OR LED
(depending on the model)
Light bulb
LED light bulb

Especificaciones del producto

Marca: Hotpoint
Categoría: congelador
Modelo: HSZ12A2D

¿Necesitas ayuda?

Si necesitas ayuda con Hotpoint HSZ12A2D haz una pregunta a continuación y otros usuarios te responderán




congelador Hotpoint Manuales

congelador Manuales

Últimos congelador Manuales