Hotpoint RZAV21P Manual de Usario

Hotpoint congelador RZAV21P

Lee a continuación 📖 el manual en español para Hotpoint RZAV21P (12 páginas) en la categoría congelador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

GBGBGBGBGB

FREEZER

RZAV21T

RZAV21P

Operating Instructions

English

Contents

Installation, 2-3-4

Positioning and connection

Reversible doors

Description of the appliance, 5

Overall view

Start-up and use, 6

Starting the appliance

Using the freezer to its full potential

Maintenance and care, 7

Switching the appliance off

Cleaning the appliance

Avoiding mould and unpleasant odours

Defrosting the appliance

Precautions and tips, 8

General safety

Disposal

Respecting and conserving the environment

Troubleshooting, 9

Guarantee, 10

After Sales Service, 11

Installation

Connection of the water supply

To carry this out, use the kit provided which contains all

the necessary elements for connection to the water supply.

To improve the performance of the Aqua Care, we

recommend that you fit a tap with a filter on the pipe for

the connection to the water system: in this way it will be

possible to manually interrupt the water supply during long

periods in which Aqua Care is not used.

! The water pressure inside the water system must be

between 0.8 bar and 8 bar.

! The appliance must only be connected to a water supply

suitable for drinking.

Your appliance is supplied with a 13amp fused plug that

can be plugged into a 13amp socket for immediate use.

Before using the appliance please read the instructions

below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved

fuse to BS 1362 should always be used and the fuse

cover re-fitted.

If the fuse cover is lost, the plug must not be used until a

replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or the

colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and

you should wish to remove it to add a longer cable or to

re-route the mains cable through partitions, units etc.

please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of

approval.

- The mains cable is wired directly into a

13amp cable outlet, controlled by a

switch (in compliance with BS 5733)

which is accessible without moving the

appliance.

! Before placing your new appliance into operation please

read these operating instructions carefully. They contain

important information for safe use, for installation and for

care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied

in the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to

the electricity mains. Before inserting the plug into the

electrical socket ensure the following:

 The appliance is earthed and the plug is compliant with

the law.

 The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located

inside the freezer (e.g. 150 W).

 The voltage is in the range of values indicated on the

data plate located inside the freezer (e.g. 220-240V).

 The socket is compatible with the plug of the appliance. If

the socket is incompatible with the plug, ask an authorised

technician to replace it ( ). Do not usesee Assistance

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

!The manufacturer declines any liability should

these safety measures not be observed.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit

your socket. The cable should be cut as close as possible

to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded

plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

- Connect Green and Yellow wire to terminal marked

'E' or or coloured Green and Yellow.

- Connect Brown wire to terminal marked 'L' or coloured

red or brown.

- Connect Blue wire to terminal marked 'N' or coloured

Black or Blue.

If a 13amp plug (BS 1363) is used it must be

fitted with a 13amp fuse. A 15amp plug must be protected

by a 15amp fuse, either in the plug or adaptor or at the

distribution board.

If you are in any doubt about the electrical

supply to your machine, consult a qualified

electrician before use.

CE Marking certifies that this appliance conforms to

the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC

& 93/68/EEC

Especificaciones del producto

Marca:	Hotpoint
Categoría:	congelador
Modelo:	RZAV21P
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Knoppen
Color del producto:	Niet van toepassing
Bisagras de puerta:	Rechts
Pantalla incorporada:	Nee
Peso.:	47900 g
Ancho:	558 mm
Profundidad:	548 mm
Altura:	1221 mm
Longitud del cable:	2.3 m
Nivel de ruido:	35 dB
Clase-de-eficiencia-energética:	D
Consumo-anual-de-energía:	118 kWu
Capacidad neta del congelador:	15 l
Capacidad de congelación:	3 kg/24u
Dirección de apertura de puerta intercambiable.:	Ja
Capacidad neta del frigorífico:	172 l
Sin escarcha (nevera):	Nee
Iluminación interior del frigorífico:	Ja
tipo-de-lámpara:	LED
Sistema multivía aérea (refrigerador):	Nee
Número de estantes en el refrigerador.:	4
Número-de-cajones-para-verduras:	1
Posición del congelador:	Boven
Sin escarcha (congelador):	Nee
Tiempo de retención en caso de corte de energía:	11 uur
numero de estrellas:	4*
Capacidad neta total:	187 l
Botellero:	Ja
Descongelación automática (frigorífico):	Ja
Ancho del compartimento de instalación:	568 mm
Profundidad del compartimento de instalación:	550 mm
Altura del compartimento de instalación:	1228 mm
Material del estante:	Glas
Función súper genial:	Ja
Bolsillos en las puertas del refrigerador:	4
Fuente-de-alimentación:	Electrisch
Alarma de puerta abierta:	Ja
Uso de energía por día:	0.32 kWh/24u
Actual:	10 A
Temperatura mínima de funcionamiento:	10 °C
Temperatura máxima (en funcionamiento):	38 °C
Clase-climática:	SN-ST
Clase de emisión de ruido:	B
Estantes ajustables:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Escala de eficiencia energética:	A tot G
Porta cubitos de hielo:	Ja