HQ BAT-LEAD-C10 Manual de Usario

HQ No categorizado BAT-LEAD-C10

Lee a continuación 📖 el manual en español para HQ BAT-LEAD-C10 (40 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
BAT-LEAD-C10HQ
AUTOMATIC CHARGER
FOR 2V / 6V / 12V
LEAD ACID BATTERIES
READ INSTRUCTION BEFORE USE!
English Deutsch Français
Nederlands
Italiano Español Magyar Suomi Svenska Česky
MANUAL
MODE D’EMPLOI
MANUALE
HASZNÁLATI ÚTMUTATÓ
BRUKSANVISNING
ANLEITUNG
GEBRUIKSAANWIJZING
MANUAL DE USO
YTTÖOHJE
VOD K POUŽI
Česky Svenska Suomi
Magyar
Español Italiano
Nederlands
Français Deutsch English
DESCRIPTION
This charger charges all 2 / 6 / 12V DC sealed lead acid batteries
between 2.2Ah and 10Ah automatically. When connected battery is
fully charged, charging current is reduced to prevent overcharging.
Automatic voltage and current control ensures that the connected
battery stays completely charged and overcharging as well as gas
development is prevented. Provided with short circuit and wrong
polarity protection
OPERATING INFORMATION
In contrast to simple chargers the charging current of this automatic
charger is not constant and depends on some components, for
example the actual charging level of the battery, the age, type and
capacity of the battery. Also it is important how much the battery has
been discharged before.
If the battery has been discharged with high currency, then charging
will also start with high current (max. 0,6mA). This means that with
rising of the battery voltage, the charging current decreases.
Towards the end of the charging process normally the green light
diminishes, indicating that the battery is fully charged. With old
batteries sometimes there might be a small current owing (leakage
current of the battery). Here the green light might stay on, depending
on the strength of this leakage current.
This charger can charge batteries of capacities between 2.2Ah and
10Ah. The bigger the capacity, the longer the charging time will be.
For charging it is not important if the battery is partly or completely
discharged. The battery can stay connected for the charger for a long
period.
In case of connecting the battery with wrong polarity, the red LED will
burn and charging current will be cut off.
1
USING THE CHARGER IN 4 STEPS
1. Choose right charging voltage (2V, 6V or 12V DC). Wrong voltage
can destroy the charger and/or battery!
2. Connect red pin of the charger to (+) terminal of the battery and the
black pin to the (-) terminal of the battery.
3. connect the chager to a 230V AC mains outlet socket.
4. After charging, remove charger from mains outlet socket, then
remove battery connection.
CAUTION!
This product is short-term short circuit protected! Short circuits last
ing longer than 1 minute must be prevented under all circumstances,
otherwise parts of the charger might be overloaded and damage
the charger!
This charger is for charging the described sealed lead acid batteries
only! Attempts to charge other type batteries might result in personal
injuries and damage to the charger
If the supply chord is damaged it must be replaced by the
manufacturer or it’s service agent to avoid hazard
Pay attention to the right polarity!
Never deeply discharge the battery during charging
During charging the battery must be placed in a well ventilated
area
Always check the charging instructions on the battery
This charger is not intended for use by young children or infi rm
persons without supervision. Young children should be supervised
to ensure that they not play with the appliance
Open cells of lead acid batteries before charging
Check the acid of the battery for longer charging
Check acid of the battery in between charging and make sure not
to have open re, open light and glimmers close to the charged
batteries. (danger of explosion due to gas)
English Deutsch Français
Nederlands
Italiano Español Magyar Suomi Svenska Česky
2

Especificaciones del producto

Marca: HQ
Categoría: No categorizado
Modelo: BAT-LEAD-C10

¿Necesitas ayuda?

Si necesitas ayuda con HQ BAT-LEAD-C10 haz una pregunta a continuación y otros usuarios te responderán




No categorizado HQ Manuales

No categorizado Manuales

Últimos No categorizado Manuales