IFM AC0017 Manual de Usario

IFM Niet gecategoriseerd AC0017

Lee a continuación 📖 el manual en español para IFM AC0017 (3 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Installation instructions

Dual sensor

701152 / 02 10 / 2007

Function and features

The T5 dual sensor is a slave in the AS-i system (AS-i profile S-7.A.E).

It is designed for use on pneumatic valve actuators. It energises the solenoid of

the pneumatic valve and provides position feedback from the actuator.

Sensor and actuator supply as well as data transfer to the controller via AS-i

2-wire cable.

Watchdog function: If the connection to the master is interrupted for more than

40 ms, the output is switched off (logically 0) when the master messages fail.

Diagnostic information via red LED (short circuit or open circuit).

Operation and display elements

1 2 3 4

M12-plug

standard actuator

T5 dual sensor

solenoid valve

sensor area

M12 socket

puck

AS-i flat cable

•

Installation

Address the T5 dual sensor with an addressing unit, address “0” is set at the

factory. Fasten it to the valve fixings according to the standards (ISO 5211

VDI/VDE).

Connect the solenoid valve to the M12 socket. Only solenoid valves with a

nominal voltage of 24 V and a power of up to max. 1 W may be connected.

Modification of a 5/2 valve to 3/2 or vice versa by using the supplied plates.

Data bits

Data bit Type Designation Description

D0 input sensor 1 sensor position 1 damped

D1 input sensor 2 sensor position 2 damped

D2 input error actuator open circuit / short circuit at the actuator

D0 output actuator switch output for solenoid valve

Connection

M12 plug Pin M12 socket Pin

AS-i + 1 switch output + 4

AS-i - 3 voltage - 3

Operation

Check the safe functioning of the unit. Display by LEDs.

Red LED is lit: short circuit or open circuit in one output.

Yellow LED is lit: function display (input and output signals are displayed).

•

Especificaciones del producto

Marca:	IFM
Categoría:	Niet gecategoriseerd
Modelo:	AC0017
Peso.:	2100 g
Altura:	69 mm
Código de seguridad internacional (IP):	IP20
Certificados de sostenibilidad:	RoHS
Potencia de salida:	240 W
Abarcando:	36 V
voltaje-de-entrada-de-CA:	90 - 305 V