IFM DI0003 Manual de Usario

IFM Niet gecategoriseerd DI0003

Lee a continuación 📖 el manual en español para IFM DI0003 (3 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Installation instructions

Compact speed monitor

DIA

701092 / 03 09 / 2007

1 Functions and features

The Compact speed monitor detects without contact whether a minimum speed is

reached and signals underspeed by means of a switching signal.

Nominal sensing range (Sn) 10 mm; Preset speed adjustable, see type label.

2 Installation

³F

³2 x A

½ x Sn

Fix the unit by means of a mounting device and secure it by means of the nuts

provided so that it cannot work loose. Flush installation.

Adhere to the above dimensions to ensure a correct function.

3 Electrical connection

Disconnect power.

Connect the unit according to the indications on the type label.

Note: insert a miniature fuse according to the technical data sheet, if specified.

Recommendation: check the safe functioning of the unit after a short circuit.

►

4 Adjustment

LEDs

Green LED: output switched (actual

speed > preset speed)

Yellow LED (optional for 2-wire AC/DC):

sensor damped

multiturn potentiometer

preset value

Keep the speed to be monitored in the plant on a constant level.

The yellow LED must flash (damping pulses are detected).

Start the adjustment according to A or B when the start-up delay* (AÜ see type

label) has elapsed.

Green LED lit

Green LED not lit

Turn the pot clockwise until the LED goes

off.

Turn the pot slowly anticlockwise until the

LED is lit.

Turn the pot slowly anticlockwise until the

LED is let.

—

On delivery: pot at the right end stop (except DI5011 = approx. 30 pulses/min).

5 Operation

The operation is maintenance-free. Ensure the following for a correct function:

Keep the sensing face and the open space free of metal deposits and foreign

bodies.

Do not operate units with high field intensity (e.g. walkie-talkies) at close range

to the speed monitor.

*) The start-up delay (AÜ) suppresses an error signal as long as the machine is in

the process of starting and has not yet reached its nominal speed. After applica-

tion of the operating voltage the start-up delay is active only once.

If the drive is often turned on and off, couple the supply voltage of the drive and

the monitor. By doing so, the start-up delay is active every time the drive is turned

on.

►

Especificaciones del producto

Marca:	IFM
Categoría:	Niet gecategoriseerd
Modelo:	DI0003
Color del producto:	Grijs
Ancho:	914 mm
Profundidad:	102 mm
Altura:	65 mm
Bluetooth:	Ja
Tecnología de conectividad:	Bedraad en draadloos
Cables suministrados:	Optisch
Incluye adaptador de CA:	Ja
Energía promedio:	56 W
Radio FM:	Nee
subwoofer de potencia media:	18 W
Canales de salida de audio:	2.0 kanalen
Salida máxima de potencia musical (PMPO):	110 W
Sistema de suspensión para la pared.:	Ja
Entrada auxiliar:	Ja
reflejo de graves:	Ja
Potencia RMS del altavoz de la barra de sonido:	56 W
Distorsión Armónica Total (THD):	1 procent
subwoofer suministrado:	Ja
Usar soporte para TV:	Nee
Entrada óptica de audio digital:	1
Peso de la barra de sonido:	2870 g
Diámetro del altavoz de graves:	2.5 "
Número de controladores de woofer:	2
Diámetro hogetonenluidspreker:	0.75 "
Número de controladores de tweeter:	2
Sensibilidad del subwoofer:	100 dB
Ubicación del subwoofer:	Ingebouwd
Mando a distancia incluido:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Frecuencia de cruce:	2300 Hz