IFM E30122 Manual de Usario

Lee a continuación 📖 el manual en español para IFM E30122 (9 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/9
Installation instructions
Welding adapter
for units with Aseptoflex Vario adaptation
706016 / 05 01 / 2022
UK
UK
UK
UKUK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
CAUTION
Warning of personal injury.
> Slight reversible injuries may result.
Contents
1 Preliminary note 2 ...................................................................................................
1.1 Symbols used 2 ................................................................................................
2 Safety instructions 3 ...............................................................................................
3 Intended use 3 ........................................................................................................
3.1 Basic notes 4 ....................................................................................................
4 Installation............................................................................................................5
4.1 Welding operation with welding aid 5 ...............................................................
4.2 Post-processing .............................................................................................8
4.2.1 Accessories for processing the weld seam 9 ..........................................
5 Mount sensor 9 .......................................................................................................
6 Set-up ..................................................................................................................9
3
UK
2 Safety instructions
The product described is a subcomponent for integration into a system.
- The system architect is responsible for the safety of the system.
- The system creator undertakes to perform a risk assessment and to create
documentation in accordance with legal and normative requirements to be
provided to the operator and user of the system. This documentation must
contain all necessary information and safety instructions for the operator, the
user and, if applicable, for any service personnel authorised by the architect
of the system.
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose (→ Intended use).
Only use the product for permissible media.
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, set-up, operation and maintenance of the product must be carried
out by personnel qualified and authorised for the respective activity.
Protect the product against damage.
3 Intended use
The welding adapter allows the installation of sensors in tanks or piping systems.

Especificaciones del producto

Marca: IFM
Categoría: No categorizado
Modelo: E30122

¿Necesitas ayuda?

Si necesitas ayuda con IFM E30122 haz una pregunta a continuación y otros usuarios te responderán




No categorizado IFM Manuales

No categorizado Manuales

Últimos No categorizado Manuales