IFM IG515A Manual de Usario

IFM Niet gecategoriseerd IG515A

Lee a continuación 📖 el manual en español para IFM IG515A (3 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Operating instructions

(Ex protection related part)

Inductive sensors

IG / II

80297014 / 00 09 / 2020

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 60079-0 and EN 60079-31 are met.

• Certificat d‘examen de type:

BVS 20 ATEX E 054 X

• Certificat d‘examen IECEx de type:

IECEx BVS 20.0041X

• Marking (see unit or technical data sheet)

II 3D Ex tc IIIC T80°C Dc X

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see „Marking“ above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only. Rubbing with non-

conductive materials must be strictly avoided.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• Avoid direct radiation with high UV components (sunlight). Mount the unit in a protected

place.

• M12 plugs may only be opened or closed in a sufficiently clean environment.

• The secure fit of the impact protection housing for the sensor must be checked depending

on the installation conditions (temperature, vibration,...) and at intervals to be defined by

the operator.

Special conditions for safe operation

• The housing and housing parts made of plastic were tested with the supplied impact pro-

tection housing in accordance with EN 60079-0 for group II and for a low mechanical risk

with an impact energy of 4 joules.

• For cable units a sufficient strain relief must be ensured and the cable must be firmly laid.

• For units for which an additional fuse is requested, this fuse must be located outside the

hazardous areas.

• The units must only be operated with the supplied impact protection housing for the

sensor.

► Screw the impact protection housing onto the sensor manually until the end stop.

► Screw the lock nut against the impact protection housing.

► Turn the nut against the impact protection housing until the latter also starts to turn. Use

an appropriate spanner.

Maintenance / Repair

The unit must not be modified nor can it be repaired. In case of a fault please contact the

manufacturer.

If required, the technical data sheets and EC declarations of conformity can be obtained

from the manufacturer. Indicate the article number.

Especificaciones del producto

Marca:	IFM
Categoría:	Niet gecategoriseerd
Modelo:	IG515A
Color del producto:	Zwart
Peso.:	172 g
Ancho:	93 mm
Profundidad:	110 mm
Altura:	79 mm
Longitud del cable:	1.6 m
Peso del embalaje:	360 g
Ancho del embalaje:	112 mm
Empaquetadura en profundidad:	140 mm
Altura del embalaje:	92 mm
Fuente-de-alimentación:	Kabel
Tipo de embalaje:	Doos
factor vorm:	Linkshandig
Tecnología de conectividad:	Bedraad
País de origen:	China
Material:	Kunststof
Destinado a:	Kantoor
Conecta y reproduce:	Ja
Soporta Windows:	Ja
Diseño ergonomico:	Ja
Número:	1
Número de botones:	5
Conexión:	USB Type-A
Soporta el sistema operativo Mac:	Ja
Compatible con Linux:	Ja
Color de superficie:	Monochromatisch
Tipo de desplazamiento:	Wiel
Resolución de movimiento:	3500 DPI
tipo de botones:	Drukknoppen
Número de ruedas de desplazamiento:	1
Direcciones de desplazamiento:	Verticaal
Altura del paquete principal (exterior):	190 mm
Ancho del embalaje principal (exterior):	575 mm
Peso bruto del embalaje principal (exterior):	14820 g
Longitud del paquete principal (exterior):	575 mm
Cantidad por caja principal (exterior):	50 stuk(s)
Memoria incorporada:	Nee
Código del Sistema Armonizado (SA):	84716070
Exposición:	Nee
Botones programables del ratón:	Nee
Resolución de movimiento ajustable:	Ja
Número de modos de resolución de movimiento:	4
Soporte multidispositivo:	Nee
Período de garantía:	2 jaar
diseño vertical:	Ja