IFM IM3500 Manual de Usario

Lee a continuación 📖 el manual en español para IFM IM3500 (3 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Installation Instructions
Inductive sensor
IME ush
704287 / 00 09 / 2007
UK
UK
UK
UK
UK
2
Function and features
This sensor detects metals without contact and indicates their presence by provi-
ding a switched signal. The nominal sensing range (Sn) can be seen in the type
designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;
(values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Installation
Screw the proximity switch to a rm
base. If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (g. 1 and 2).
When mounted in metal, the metal must
not protrude over the sensing face.
Open space in front of the sensing
face when mounted in metal: g. 3.
Minimum distance when several
sensors of the same type are
mounted: g. 4 and 5.
9mm
3 x Sn
8 x Sn
a aa
2 3
4 5
1
3
UK
Electrical connection
Disconnect power before connecting the sensor. Open the sensor (g. 6);
connect cable in accordance with the instructions on the type label.
Note: insert a miniature fuse according to the technical data sheet, if specied.
Recommendation: check the unit for reliable function after a short cirucit.
Programming of the output function:
Units which are not programmed by means of connections are provided in N.O.
Open the wire link for programming the N.C. function (g. 7A).
Markierungsaufkleber
marking sticker
autocollant
7A
Alignment of the sensing face
Remove the sensor cube (g. 7); align sensing face and re-insert the sensor
cube. When the sensor has been screwed together, position the marking sticker
provided on the outer surface of the sensor unit so that the sensing face is
marked.
Operation
Check the safe functioning of the sensor: the LED is lit when the supply voltage is
applied.
The operation of the sensor is maintenance free. For perfect functioning make
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards.
EMC: The unit conforms to the requirements of EN 60947-5-2.
6 7

Especificaciones del producto

Marca: IFM
Categoría: Niet gecategoriseerd
Modelo: IM3500

¿Necesitas ayuda?

Si necesitas ayuda con IFM IM3500 haz una pregunta a continuación y otros usuarios te responderán




Niet gecategoriseerd IFM Manuales

IFM

IFM AC2487 Manual de Usario

19 Septiembre 2024
IFM

IFM TSM401 Manual de Usario

15 Septiembre 2024
IFM

IFM OVP811 Manual de Usario

15 Septiembre 2024
IFM

IFM KTE102 Manual de Usario

15 Septiembre 2024
IFM

IFM TSM501 Manual de Usario

15 Septiembre 2024
IFM

IFM O2U540 Manual de Usario

15 Septiembre 2024
IFM

IFM SV7151 Manual de Usario

15 Septiembre 2024
IFM

IFM SU6031 Manual de Usario

15 Septiembre 2024
IFM

IFM DV1202 Manual de Usario

15 Septiembre 2024
IFM

IFM DV1104 Manual de Usario

15 Septiembre 2024

Niet gecategoriseerd Manuales

Últimos Niet gecategoriseerd Manuales