IFM IN509A Manual de Usario

Lee a continuación 📖 el manual en español para IFM IN509A (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
704495 / 00 10 / 2008
UK
UK
UK
UKUK
Operating instructions
(Ex protection related part) for inductive sensors according to EU directive
94/9/EC annex VIII (ATEX) group II, equipment category 3D
IN508A
IN509A
2
Remarks for safe use in hazardous areas
Functions and features
Use in hazardous areas according to the classification
II 3D (group II, category 3D, apparatus for dust atmosphere).
The requirements of the standards EN 61241-1 and EN 61241-0 are met.
Shock test to EN 60947-5-2 with 0.5 joules.
Marking ( unit or technical data sheet):
II 3D Ex tD A22 IP67 T80°C X TA: -20...60°C
Permissible operating temperature of the application (proper usage):
Ta: -20...60°C
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qua-
lified staff must have knowledge of protection classes, regulations and provisions
for apparatus in hazardous areas.
Check whether the classification ( “Marking” and marking on the unit) is suitable
for the application.
Installation remarks / Installation
Adhere to the respective national regulations and provisions as well as the
relevant installation regulations.
Avoid electrostatic charging on plastic units and cables.
To avoid electrostatic charging clean the unit with a damp cloth only. In princi-
ple, rubbing with non-conductive materials must be avoided.
To avoid electrostatic charging steps must be taken to ensure the equalisation
of potential of metal parts (plug housing, fixing elements, protective housing,
etc.).
Do not mount the unit in the dust flow.
Avoid dust deposits on the unit.
Protect the unit and the cable efficiently against damage.
For the connections and the electrical technical data please see the unit mar-
king or the technical data sheet.
3
UK
To avoid soiling, do not remove the dust caps from the cable glands or the
plugs until introducing the cables or attaching the socket.
Avoid direct radiation with high UV components (sunlight), mount the unit in a
protected place.
M12 plugs may only be opened or closed in a sufficiently clean environment.
Special conditions for safe operation
For test purposes, the housing and housing parts made of plastic were expo-
sed to mechanical stress of 0.5 joules (in accordance with EN 60947-5-2). The
user must take appropriate measures (e.g. mounting and installation condi-
tions, use of a protective device, etc.) to ensure that the unit is not exposed to
high mechanical stress / shocks.
The sensor (1) must only be installed in conjunction with the mounting plate (2).
3
1: sensor
2: mounting plate
3: mounting screws
(supplied with the unit)
2
1
The sensing face is not designed for mechanical stress. Therefore the unit
must only be operated with target pucks which exclude mechanical stress on
the sensing face.
For cable units a sufficient strain relief must be ensured or the cable must be
firmly laid.
Use sockets which are suited for hazardous dust areas, e.g. ifm sockets
EVC**A with 2D certificate (certificate number BVS 08 ATEX E 109 U).
Protect the sockets by tightening the hexagon coupling nut sufficiently accor-
ding to the requirements of the Ex protection related operating instructions of
the socket.
Do not separate the connector when energized.

Especificaciones del producto

Marca: IFM
Categoría: No categorizado
Modelo: IN509A

¿Necesitas ayuda?

Si necesitas ayuda con IFM IN509A haz una pregunta a continuación y otros usuarios te responderán




No categorizado IFM Manuales

No categorizado Manuales

Últimos No categorizado Manuales