IFM OGS300 Manual de Usario

Lee a continuación 📖 el manual en español para IFM OGS300 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Operating instructions
Through-beam sensor
OGE3xx / OGS3xx
UK
UK
UK
UK
UK
704461 / 01 01 / 2009
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: ( type label).
3 Installation
1 1
LED1:
Install the receiver (OGE3xx) and secure it to a bracket.
Align the transmitter (OGS3xx) to the receiver and secure it in the same way.
Maximum range only with accurate alignment.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
3
UK
Transmitter (OGS3xx) connector
1
3
L+
L
pin 1 = L+
(pin 2: not connected)
pin 3 = L-
(pin 4: not connected)
Transmitter (OGS3xx) cable *
L+
L
BN
BU
BN = L+
BU = L-
Receiver (OGE3xx) connector
L+
L
1
4
3
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load
Receiver (OGE3xx) cable *
BN
BK
BU
L+
L
BN = L+
BU = L-
BK = load
* Core colours: BN = brown, BU = blue, BK = black
5 Operation
Check whether the unit operates correctly.
Transmitter (OGS3xx): The green LED is lit when the sensor is ready for
operation.
Receiver:
Dark-on switching units (OGE-DPKG): the output is switched / the yellow LED
is lit when an object is detected.
Light-on switching units (OGE-HPKG): the output is switched / the yellow LED
is lit when no object is detected.

Especificaciones del producto

Marca: IFM
Categoría: No categorizado
Modelo: OGS300
Color del producto: Blue, Grey
Peso.: 10500 g
Amable: Cilinderstofzuiger
Filtración de aire de aspiradora: HEPA
Vacío: 21 kPa
Rango: - m
Método de separación de la suciedad: Filtrerend
Capacidad de polvo: - l
tubo telescópico: Nee
Potencia máxima de entrada: 2200 W
poder de succión: - AW
Accesorio de almacenamiento/almacenamiento: Ja
control de potencia de succión: Elektronisch
Uso correcto: Thuis
Versión de vapor continuo: 90 g/min
Inalámbrico: Nee
Presión máxima de vapor: 4 bar
Dimensiones (Ancho x Fondo x Alto): 520 x 360 x 340 mm
Capacidad de secado de polvo: 1.8 l
potencia de la caldera: 1100 W
Capacidad de polvo mojado: 1.2 l
Capacidad de la caldera: 1500 ml

¿Necesitas ayuda?

Si necesitas ayuda con IFM OGS300 haz una pregunta a continuación y otros usuarios te responderán




No categorizado IFM Manuales

No categorizado Manuales

Últimos No categorizado Manuales