IFM PA3222 Manual de Usario

Lee a continuación 📖 el manual en español para IFM PA3222 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Installation Instructions
Electronic pressure sensor
PA32xx
704091 / 01 06 / 2019
UK
2
1 Symbols used
Instruction
Important note
Non-compliance can result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
The device described is a subcomponent for integration into a system.
- The manufacturer of the system is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the opera-
tor, the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions.
Only use the product for its intended purpose (→ Functions and features).
Only use the product for permissible media (→ Technical data).
Inhalt
1 Symbols used 2 ......................................................................................................
2 Safety instructions 2 ...............................................................................................
3 Function and features ..........................................................................................3
3.1 Applications ...................................................................................................4
4 Installation............................................................................................................4
5 Electrical connection 5 ............................................................................................
3
UK
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator.
Protect units and cables against damage.
For units with cULus approval and the scope of validity cULus:
The device shall be supplied from an isolating transformer having a secondary
Listed fuse rated as noted in the following table.
Overcurrent protection
Control-circuit wire size Maximum protective device rating
Ampere
AWG (mm2)
26 1(0.13)
24 2(0.20)
22 3(0.32)
20 5(0.52)
18 7(0.82)
16 10(1.3)
The Sensor shall be connected only by using any R/C (CYJV2) cord, having
suitable ratings.
3 Function and features
The pressure sensor detects the system pressure and converts it into an analog
output signal.
4 ... 20 mA

Especificaciones del producto

Marca: IFM
Categoría: No categorizado
Modelo: PA3222

¿Necesitas ayuda?

Si necesitas ayuda con IFM PA3222 haz una pregunta a continuación y otros usuarios te responderán




No categorizado IFM Manuales

No categorizado Manuales

Últimos No categorizado Manuales