IFM SF211A Manual de Usario

Lee a continuación 📖 el manual en español para IFM SF211A (8 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Operating instructions /
Mounting instructions
Flow sensor
SF***A
704181 / 02 06 / 2012
UK
2
Before installation, read the safety-related section of the operating
instructions, enclosed separately!
1 Installation
The sensor tip must be completely immersed in the medium.
In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).
- When the unit is to be mounted at the bottom of the pipe, it should be free
from deposits.
- When the unit is to be mounted at the top of the pipe, it should be completely
filled with the medium to be monitored.
In the case of vertical pipes mount the unit in a place where the medium flows
upwards (fig. 2).
A
B
1
A
B
2
A: mounting bush (15 mm for units with M12 x 1 and G¼ thread; 33 mm for units with G½
thread).
B: packing washer
To avoid malfunction a minimum
distance between the flow monitor and
bends, valves or such like must be ob-
served (fig 3). Min. 5 x pipe diameter
upstream (A), min. 3 x pipe diameter
downstream (B).
D
A
B
min.
5 x D
min.
3 x D
3
3
UK
2 Ceramic units
Max. tightening torque: 8Nm for units with G¼ thread; 30Nm for units with G½
thread.
The thread of the mounting bush must be clean, undamaged and comply
with the standard (pipe thread to DIN ISO 228).
For sealing only use flat seals.
3 Flow sensor SF620A
124
3
Screw the clamp adapter (2) onto the process fitting (1).
Insert the flow sensor (4) into the adapter.
Set the requested installation length.
Tighten the nut (3) (follow the instructions included with the clamp adapter).
Recommended insertion depth of the sensor: 20 ... 30 mm in the pipe. Min.
12 mm, max. to mid pipe.
Note: The sensor tip must not touch the pipe wall.

Especificaciones del producto

Marca: IFM
Categoría: No categorizado
Modelo: SF211A

¿Necesitas ayuda?

Si necesitas ayuda con IFM SF211A haz una pregunta a continuación y otros usuarios te responderán




No categorizado IFM Manuales

No categorizado Manuales

Últimos No categorizado Manuales