JBL PD5322 Manual de Usario

JBL Vocero PD5322

Lee a continuación 📖 el manual en español para JBL PD5322 (2 páginas) en la categoría Vocero. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
PD5322/95
Specifications:
Frequency Range1(-10 dB): 41 Hz to 17 kHz
Frequency Response1(±3 dB): 49 Hz to 15 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 10.5
Directivity Index (DI): 10.2 dB
Crossover Modes: Tri-amp/Bi-amp (passive mid-high) switchable
Passive Crossover2: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz
Transducer Power Ratings LF: 1600 W (6400 W peak)
, 2 hrs. 1200 W (4800 W peak), 100 hrs
(AES)3: MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2 hrs
Long-Term System Power Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)
Rating (IEC)4:Bi-amplified Passive Mode: M/HF: 300 W (1200 W peak), 100 hrs
Maximum SPL5: Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)
MF: 134 dB-SPL cont avg (140 dB peak)
HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode: 134 dB-SPL cont avg (140 dB peak)
System Sensitivity
6(1W @ 1m): Passive Mode: 109 dB-SPL (mid/high section only)
Transducers:
Low Frequency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil
Nominal Impedance: 4 ohms (2 x 8 ohms, internally wired in parallel)
Sensitivity
6(1W, 1m): 96 dB-SPL
Mid Frequency Driver:
CMCD-82H cone midrange compression driver with intergral 200 mm (8 in)
Differential Drive®dual 75 mm (3 in) voice coil driver
Nominal Impedance: 8 ohms
Sensitivity
6(1W @ 1m): 109 dB-SPL
High Frequency Driver:
2431H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity
6(1W @ 1m): 114 dB-SPL
Waveguides: MF: PT-N95MF 600 x 600 mm (24 x 24 in)
HF: PT-H95HF 300 x 300 mm (12 x 12 in)
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
11-ply Finnish birch plywood.
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
(eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant for outdoor placement where the loudspeaker will be sheltered WRC
Versions: from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt air,
extreme high humidity or rapid changes in temperature. See WRC/WRX
configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®NL8, plus CE-compliant covered barrier strip terminals.
Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width
9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-
through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC
or WRX.
Dimensions 991 x 673 x 706 mm
(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)
Net Weight: 77 kg (170 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
1. In bi-amp mode, with recommended active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES
2 hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
High Output Three-Way
Full-Range Loudspeaker
with 2 x 12" LF
Key Features:
Two high power 300 mm (12 in)
transducers in a compact slot-loaded
configuration for low frequency extension
to 40 Hz.
High power CMCD™ Cone Midrange
Compression Driver provides high sensi-
tivity and high continuous SPL capability
along with low distortion, extended band-
width and improved phase coherence.
Large format neodymium HF driver
provides clear intelligible high frequency
projection.
Large PT™ Progressive Transition™ wave-
guides provide consistent 90° x 5pat-
tern control, low distortion at high SPL
levels and smooth frequency response.
Rotatable mid and high frequency wave-
guides allow either horizontal or vertical
cabinet orientation.
Sophisticated, steep-slope passive mid-
high crossover network with switchable
tri-amp/bi-amp crossover modes.
Applications:
Performing arts facilities/Live theaters
Auditoriums/Houses of worship
Dance clubs/Sports facilities
PD5322/95 is a Precision directivity
90° by 50° full range, three-way loudspeaker
designed for use in arrays or singly in
demanding music or speech system applica-
tions requiring high output capabiliy with
excellent pattern control and low frequency
extension to 40 Hz.
The low frequency section, two 2206H
300 mm (12 in) VGC™ Vented Gap Cooled
low frequency transducers, offer high power
handling and low power compression for
high continuous SPL capability. A newly
designed LF loading plate provides the high-
est possible sensitivity, low frequency output
and system reliability.
The mid and high frequency sections are
horn-loaded for maximum sensitivity and
pattern control. The CMCD-82H cone
midrange compression driver consists of a
driver/phasing plug assembly providing high
output with low distortion. The design’s
extended response coupled with a small 100
mm (4 in) exit diameter allow for smoother
transition to the high frequency driver in the
magnitude and polar pattern domains. The
integral 200 mm (8 inch) cone driver fea-
tures a high power Differential Drive
®
dual,
voice coil design. The 2431H large format
high frequency compression driver utilizes a
neodymium magnet and aluminum
diaphragm to deliver clear and intelligible
high frequency projection, extended fre-
quency response, and low distortion at even
the highest drive levels.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2004 JBL Professional
A Harman International Company
SS PD5322/95
CRP 5M
10/04
PD5322/95 High Output Three-Way Full-Range Loudspeaker
100 1000 10000
10
100
Vertical Beamwidth
Horizontal Beamwidth
Frequency (Hz)
Beamwidth (-6dB Coverage)
360
20 20K
Beamwidth (Degrees)
706 (27.8)
300 (11.8)
15˚
673 (26.5)
991 (39.0)
Top
Front Side Back
Measurements obtained in tri-amplified crossover mode.
Dimensions
Dimensions in mm (in)
Beamwidth
JBL continually engages in research related to product improvement. Some materials,
production methods and design refinements are introduced into existing products
without notice as a routine expression of that philosophy. For this reason, any cur-
rent JBL product may differ in some respect from its published description, but will
always equal or exceed the original design specifications unless otherwise stated.
Large PT™ Progressive Transition waveguides achieve an
optimum balance of extremely well controlled coverage
with low distortion, smooth frequency response, and natu-
ral sound character. The mid and high frequency horns
are rotatable for cabinet positioning in either horizontal or
vertical orientation. High-slope crossovers minimize band
overlap and a well-controlled off-axis response enhances
arrayability.
The loudspeaker can be operated in either bi-amplified
(passive mid/high) or in tri-amplified mode. In either
case, digital signal processing is required in order to
achieve specified performance. Input connectors include
both Speakon
®
and CE-approved covered barrier strip
input connectors for hookup versatility. The cabinet is fit-
ted with twenty M10 threaded suspension points, support-
ing a wide variety of installation approaches.

Especificaciones del producto

Marca: JBL
Categoría: Vocero
Modelo: PD5322

¿Necesitas ayuda?

Si necesitas ayuda con JBL PD5322 haz una pregunta a continuación y otros usuarios te responderán




Vocero JBL Manuales

Vocero Manuales

Últimos Vocero Manuales